Jump to content
SAU Community

Recommended Posts

If you're looking for mods to do to a 250GT, try first with just really a really good service. Every think clean and new, and brand new fluids. Following this, go for a Z-Tube. In terms of performance gains its really quite negligible (Tiny TINY feeling in power), but it does make for some nice intake sounds.
A grounding kit is also a recommendation. If you look at the grounding cable coming from you're battery you can see how it really is quite shit. A decent grounding kit can just help with the overall running of the car, esp with automatic. Personally I noticed a much better charge to the battery when the engine was running. 14.1v vs 14.5v with the kit.
I've asked around with the plenum spacer but no one really seems to know. I also really want to know whether or not the plenum spacer from the VQ35DE will work on this because some people are reporting dyno figures of around +8-13hp with it on. So if anyone does know please also respond to this.
Apart from that, that's pretty much it. This is one of the highest HP naturally aspirated 2.5l nissan has made, so the ECU is very temperamental for any changes and it self learns as well. Piggy back systems are possible, but they are quite expensive.

Also i'm all the way in NZ and currently theres a VQ25DET engine on trademe here going for $1900 with only 130,000km done on it. SO tempting, but wouldn't know where to start to get the engine fitted into my 250GT

Plenum spacers on DD can work but modification to the EGR os required. Have your plenum cleaned, plug changed and oil changed will improve it.

Z tube all it does is make a noise and does sweet fark all. May aswell put a pod filter on for the full sick induction noise.

VQ25DD were not designed for power they where designed for economy. Really should have done your research with modifications in mind before buying a 250

Plenum spacers on DD can work but modification to the EGR os required. Have your plenum cleaned, plug changed and oil changed will improve it.

Z tube all it does is make a noise and does sweet fark all. May aswell put a pod filter on for the full sick induction noise.

VQ25DD were not designed for power they where designed for economy. Really should have done your research with modifications in mind before buying a 250

When you say the plenum will work with modification, is this process expensive/time consuming, or is it not worth the 8 - 10 HP from the plenum spacer? Considering if these gains will even be similar or not to a DET engine compared to DD I upgraded the air box with a greedy complete box conversion, noise isn’t really louder and power gain is only slight, I’ve been told that changing the headers will give some decent increases in power, but the only performance headers I can find are for the VQ30DET and VQ35DET, the engines look the same as my VQ25DD, but I’m sure there is some minute differences which makes these parts incompatible for me, although I’d love to be mistaken and have these headers fit with the VQ25DD.

When you say the plenum will work with modification, is this process expensive/time consuming, or is it not worth the 8 - 10 HP from the plenum spacer? Considering if these gains will even be similar or not to a DET engine compared to DD I upgraded the air box with a greedy complete box conversion, noise isnt really louder and power gain is only slight, Ive been told that changing the headers will give some decent increases in power, but the only performance headers I can find are for the VQ30DET and VQ35DET, the engines look the same as my VQ25DD, but Im sure there is some minute differences which makes these parts incompatible for me, although Id love to be mistaken and have these headers fit with the VQ25DD.

8-10hp? 10hp is just over 7kw. Do you know how much of that 7+kw will get the rear wheels and make a difference. Sweet fark all.

The factory air intake isnt that bad just take that stupid lid/cover off the front and change the filter.

As for headers and shit ask scotty. From what i can remember the 30DD takes some of the 35DE stuff but not much if not none will work on the 25DD.

VQ25DD to V35s are what CA18DE are for silvia. The VQ25DD is actually out of a FWD nissan cefiro (maxima here) and it barely moved that.

The VQ25DD is actually out of a FWD nissan cefiro (maxima here) and it barely moved that.

Sort of, it was released in the Nissan Cedric at the same time as the A33 Cefiro, and the Cedric is a RWD.

Also, the VQ30DE in the Australian A33 maxima got along ok, and the VQ25DD was only a few KW down and about 18Nm down on the VQ30, so it shouldn't have been too bad.. I have never driven a JDM A33 Cefiro though.

Still, there probably isn't too many performance options for the VQ25DD, as most would go for the VQ35 or a stock DET engine if they want performance.

While we are talking about upgrades, anyone have any experience with the Apexi SAFCII with a VQ25DD or any automatic car for that matter? is there much room for any real gains or is this going to add a mere 3-7 Kw, saying that would combining multiple minor mods equal a decent gain? have seen some pro shops around Sydney that custom build turbo’s, I got a quote for a full kit and installation designed for DD engine, would be around 4-8 K but he said he would have to take a look at my engine, so there may be some hope, hope for future Vince who has money, who will most likely just buy a new faster car.

The 250 is a nice unique daily but not a performance car. I suggest saving for something later down the track and just enjoy what you have now... I bought mine without any performance expectations and not going to mod it, just stick to general maintenance and replacing stuff as it wears our or breaks

While we are talking about upgrades, anyone have any experience with the Apexi SAFCII with a VQ25DD or any automatic car for that matter? is there much room for any real gains or is this going to add a mere 3-7 Kw, saying that would combining multiple minor mods equal a decent gain? have seen some pro shops around Sydney that custom build turbo’s, I got a quote for a full kit and installation designed for DD engine, would be around 4-8 K but he said he would have to take a look at my engine, so there may be some hope, hope for future Vince who has money, who will most likely just buy a new faster car.

The more you post the less I want to help, mainly as you don't listen well. I have already mentioned a few easy power gain mods you DD guys can do, but none have run with it.

You engine is very high compression, there is no way a turbo can help you. Anyone saying they have designed a turbo kit for the DD is talking out their ass. You can swap in a det engine if you want to go that path, but it has never been done before as far as I know, so you are on your own which costs big dollars.

The SAFC will most likely destroy your engine. At least get something with separate timing and fuel control such as the Emanage Ultimate, although I am still unsure if it will control the direct injection circuit.

Go and see your Pro shop that have never seen a VQ25, let alone a direct injection model. They would love to spend your hard earned...

Hi Scott, no disrespect was intended, I will be giving all the options that you have given me in the past to get some extra gains, just getting a lot of info from other sources which I don’t fully understand/believe is true, hence why I come here to speak with those with the experience, I also agree that turbo is a no go with Direct Injection, I’m not a mechanic and I don't have a great amount of knowledge on cars, so any information I do have is purely from the internet and from others around me. But again I do appreciate all the help/suggestions everyone has given me, and will be running with them :)

Thanks Again,

Vince

I also agree that turbo is a no go with Direct Injection.

The problem isn't direct injection, the high static CR of this engine prevents forced induction on regular petrol without major engine modification.

Actually, it is also the direct injection, as there are no highflow direct injectors available anywhere. You would need to make a new plenum with larger standard 14mm injectors and try to work around the ecu issues.

Some things just aren't meant to be, financially at least. Sell the car and buy a 3.5, there is a huge market for performance parts, as opposed to no market for the VQ25.

Interesting.. wasn't aware of that.. what about the VQ30DD injectors? .. I thought someone would have made larger Di injectors.

Either way, it is kind of a moot point I guess.

Also i'm all the way in NZ and currently theres a VQ25DET engine on trademe here going for $1900 with only 130,000km done on it. SO tempting, but wouldn't know where to start to get the engine fitted into my 250GT

What town are you in? I could suggest two or three shops that could do the work for you as well as one that may be able to tune your stock ecu.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...