Jump to content
SAU Community

Recommended Posts

Part Description Asking $ Pod filter with adaptor Needs new foam $30 Turbo custom intake pipe $50 Intake manifold $50 Custom turbo with internal gate HKS exhaust and Garret internals/wheels. Low mount good for over 285rwkw $550 Radiator $60 Engine mounts $50 Radiator overflow bottle $20 Aircon condenser With piping $80 Power steering pump $80 Alternator $80 Fuel pump No label but was fine for 285rwkw $80 Clutch master cylinder $50 Manual pedal set $60 Tail shafts $90 Exhaust Exhaust pipe Blitz 3in $200 Decat pipe Straight 3in bolt on $30 Wheels Impul NS-01 light weight racing 17in inc Federal tyres, 70% frt, 40% rr $700 Front 5 stud hubs $80 Spare space saver wheel $40 Stock Suspension Fronts Stock $75 Rears Stock $75 Front castor rods $75 Front upper control arms $50 Rear control arms $75 Brakes Discs Front $50 Master brake cylinder $50 Handbrake front section $40 Exterior Body shell Still complianced and registerable $400 Rear reinforcement bar $100 Bonnet latch $30 Rear bar Stock $100 Side skirts Stock or type M? $100 Rear pods Veilside $70 Spoiler - Series 1 No stop light and scratched $50 Bonnet Black - resprayed $120 Boot Black $80 Front wheel liner Front RH $20 Series 1 tail lights pair $120 Indicators Side - clear pair $40 Interior Front Recaro $160 Interior wiring loom $150 Rear seats $50 Instrument panel Standard black good condition $80 Center console with new boot $30 Headliner Excellent condition $50 Boot trim $30 Gear boot & surround Brand new boot $30 Taco gauge - 4in with shift light $60 Boost gauge - HKS with solenoid $60 Steering wheel Just wheel - needs recovering $50 Steering wheel Airbag $100 Pillar trims each $20

All parts are available for pickup in Macleod (VIC). Small things can be posted at extra expense.

Pics will be posted for each part upon request. Most things are still in excellent condition.

A slightly better format than the first:

Part Asking $

Pod filter with adaptor Needs new foam $30

Turbo custom intake pipe $60

Intake manifold $50

Custom turbo with internal gate

HKS exhaust and Garret internals/wheels. Low mount good for more than 285rwkw $550

Radiator $60

Engine mounts $50

Radiator overflow bottle $20

Aircon condenser With piping $80

Power steering pump $80

Alternator $80

Fuel pump No label but was fine for 285rwkw $80

Clutch master cylinder $50

Manual pedal set $60

Tail shafts $90

Exhaust

Exhaust pipe Blitz 3in $200

Decat pipe Straight 3in bolt on $30

Wheels

Impul NS-01 light weight racing 17in inc Federal tyres, 70% frt, 40% rr $700

Front 5 stud hubs $80

Spare space saver wheel $40

Stock Suspension

Fronts Stock $75

Rears Stock $75

Front castor rods $75

Front upper control arms $50

Rear control arms $75

Brakes

Discs Front $50

Master brake cylinder $50

Handbrake front section $40

Exterior

Body shell Still complianced and registerable $400

Rear reinforcement bar $100

Bonnet latch $30

Rear bar Stock $100

Side skirts Stock or type M? $100

Rear pods Veilside $70

Spoiler - Series 1 No stop light and scratched $50

Bonnet Black - resprayed $120

Boot Black $80

Front wheel liner Front RH $20

Series 1 tail lights pair $120

Indicators Side - clear pair $40

Interior

Front Recaro $160

Wiring loom $150

Rear seats $50

Instrument panel Standard black good condition $80

Centre console $20

Headliner Excellent condition $50

Boot trim $30

Gear boot & surround Brand new $30

Handbrake boot Brand new $10

Taco gauge - 4in with shift light Taco - 4in with shift light $60

Boost gauge - HKS with solenoid $60

Steering wheel Just wheel - needs recovering $50

Steering wheel Airbag $100

Pillar trims each $20

Do you still have the power steering pump? And also would you have the thermostat housing disconnected?

Hey mate, I've still got the power steering pump in good order but the thermostat housing went with the motor a while back.

Power steering pump $65. $80 delivered.

Got the power steering resovour? If so how's the condition? Pm me

Still got it and just gave it a quick wash. Condition is excellent with no issues, see pic.

$25 pickup and I'll give you the bracket and hoses with it.

post-7819-0-21167700-1391823695_thumb.jpg

Headlights?

Sorry buddy, Already SOLD. Tail lights and clear indicators are still available on the list though...

Sorry buddy, Already SOLD. Tail lights and clear indicators are still available on the list though...

No worries just after headlights cheers for the reply

interested in front brake disks and if u have the front washer pump (Below the bottle at the front, the one on the left).

interested in front brake disks and if u have the front washer pump (Below the bottle at the front, the one on the left).

Discs are at 28.7mm thickness from memory which is why they're priced fairly cheap with a bit of use lefy in them. I can confirm tomorrow for you.

Washer motors are sold.

Thanks

Intake manifold is still available. Top and bottom halves included. Throttle body not included.

It's not really an aging part so it's still in great condition.

What is the wheel width 17 X ? and colour

Hey mate,

The rears are 17 x 8.5 38 and the fronts are 17 x 7.5 35.

They're white and are awesome on any darker skyline (pic shows stock but previously had it lowered and looked a lot better). Have a look at the pics for the condition and style and do a search on the NS-01 impul rims for their details. One of the lightest rims you'll get.

post-7819-0-31712300-1392467115_thumb.jpg

post-7819-0-57246000-1392467185_thumb.jpg

post-7819-0-59044800-1392467203_thumb.jpg

post-7819-0-56398000-1392467721_thumb.jpg

you have pics of recaros mate?

It's currently listed on ebay but if it doesn't sell I'm happy to still sell it for my asking price here. If there's no interest it will be re-listed on ebay.

http://www.ebay.com.au/itm/111277311757?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649

Edited by Steg33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...