Jump to content
SAU Community

Recommended Posts

Part Description Asking $ Pod filter with adaptor Needs new foam $30 Turbo custom intake pipe $50 Intake manifold $50 Custom turbo with internal gate HKS exhaust and Garret internals/wheels. Low mount good for over 285rwkw $550 Radiator $60 Engine mounts $50 Radiator overflow bottle $20 Aircon condenser With piping $80 Power steering pump $80 Alternator $80 Fuel pump No label but was fine for 285rwkw $80 Clutch master cylinder $50 Manual pedal set $60 Tail shafts $90 Exhaust Exhaust pipe Blitz 3in $200 Decat pipe Straight 3in bolt on $30 Wheels Impul NS-01 light weight racing 17in inc Federal tyres, 70% frt, 40% rr $700 Front 5 stud hubs $80 Spare space saver wheel $40 Stock Suspension Fronts Stock $75 Rears Stock $75 Front castor rods $75 Front upper control arms $50 Rear control arms $75 Brakes Discs Front $50 Master brake cylinder $50 Handbrake front section $40 Exterior Body shell Still complianced and registerable $400 Rear reinforcement bar $100 Bonnet latch $30 Rear bar Stock $100 Side skirts Stock or type M? $100 Rear pods Veilside $70 Spoiler - Series 1 No stop light and scratched $50 Bonnet Black - resprayed $120 Boot Black $80 Front wheel liner Front RH $20 Series 1 tail lights pair $120 Indicators Side - clear pair $40 Interior Front Recaro $160 Interior wiring loom $150 Rear seats $50 Instrument panel Standard black good condition $80 Center console with new boot $30 Headliner Excellent condition $50 Boot trim $30 Gear boot & surround Brand new boot $30 Taco gauge - 4in with shift light $60 Boost gauge - HKS with solenoid $60 Steering wheel Just wheel - needs recovering $50 Steering wheel Airbag $100 Pillar trims each $20

All parts are available for pickup in Macleod (VIC). Small things can be posted at extra expense.

Pics will be posted for each part upon request. Most things are still in excellent condition.

A slightly better format than the first:

Part Asking $

Pod filter with adaptor Needs new foam $30

Turbo custom intake pipe $60

Intake manifold $50

Custom turbo with internal gate

HKS exhaust and Garret internals/wheels. Low mount good for more than 285rwkw $550

Radiator $60

Engine mounts $50

Radiator overflow bottle $20

Aircon condenser With piping $80

Power steering pump $80

Alternator $80

Fuel pump No label but was fine for 285rwkw $80

Clutch master cylinder $50

Manual pedal set $60

Tail shafts $90

Exhaust

Exhaust pipe Blitz 3in $200

Decat pipe Straight 3in bolt on $30

Wheels

Impul NS-01 light weight racing 17in inc Federal tyres, 70% frt, 40% rr $700

Front 5 stud hubs $80

Spare space saver wheel $40

Stock Suspension

Fronts Stock $75

Rears Stock $75

Front castor rods $75

Front upper control arms $50

Rear control arms $75

Brakes

Discs Front $50

Master brake cylinder $50

Handbrake front section $40

Exterior

Body shell Still complianced and registerable $400

Rear reinforcement bar $100

Bonnet latch $30

Rear bar Stock $100

Side skirts Stock or type M? $100

Rear pods Veilside $70

Spoiler - Series 1 No stop light and scratched $50

Bonnet Black - resprayed $120

Boot Black $80

Front wheel liner Front RH $20

Series 1 tail lights pair $120

Indicators Side - clear pair $40

Interior

Front Recaro $160

Wiring loom $150

Rear seats $50

Instrument panel Standard black good condition $80

Centre console $20

Headliner Excellent condition $50

Boot trim $30

Gear boot & surround Brand new $30

Handbrake boot Brand new $10

Taco gauge - 4in with shift light Taco - 4in with shift light $60

Boost gauge - HKS with solenoid $60

Steering wheel Just wheel - needs recovering $50

Steering wheel Airbag $100

Pillar trims each $20

Do you still have the power steering pump? And also would you have the thermostat housing disconnected?

Hey mate, I've still got the power steering pump in good order but the thermostat housing went with the motor a while back.

Power steering pump $65. $80 delivered.

Got the power steering resovour? If so how's the condition? Pm me

Still got it and just gave it a quick wash. Condition is excellent with no issues, see pic.

$25 pickup and I'll give you the bracket and hoses with it.

post-7819-0-21167700-1391823695_thumb.jpg

Headlights?

Sorry buddy, Already SOLD. Tail lights and clear indicators are still available on the list though...

Sorry buddy, Already SOLD. Tail lights and clear indicators are still available on the list though...

No worries just after headlights cheers for the reply

interested in front brake disks and if u have the front washer pump (Below the bottle at the front, the one on the left).

interested in front brake disks and if u have the front washer pump (Below the bottle at the front, the one on the left).

Discs are at 28.7mm thickness from memory which is why they're priced fairly cheap with a bit of use lefy in them. I can confirm tomorrow for you.

Washer motors are sold.

Thanks

Intake manifold is still available. Top and bottom halves included. Throttle body not included.

It's not really an aging part so it's still in great condition.

What is the wheel width 17 X ? and colour

Hey mate,

The rears are 17 x 8.5 38 and the fronts are 17 x 7.5 35.

They're white and are awesome on any darker skyline (pic shows stock but previously had it lowered and looked a lot better). Have a look at the pics for the condition and style and do a search on the NS-01 impul rims for their details. One of the lightest rims you'll get.

post-7819-0-31712300-1392467115_thumb.jpg

post-7819-0-57246000-1392467185_thumb.jpg

post-7819-0-59044800-1392467203_thumb.jpg

post-7819-0-56398000-1392467721_thumb.jpg

you have pics of recaros mate?

It's currently listed on ebay but if it doesn't sell I'm happy to still sell it for my asking price here. If there's no interest it will be re-listed on ebay.

http://www.ebay.com.au/itm/111277311757?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649

Edited by Steg33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • We have a huge update coming in the next few months, version 5 of Invision will be released. I'm holding off any changes until after this change as I'm not sure what features will be removed or introduced.
    • Yeah, plenty of air flow, there is a dedicated path that feeds the air in to the OEM intake tube behind the bumper As for a "tangible effect", maybe, but getting the pod/intake air out of the hot engine bay is worth it psychologically to me, even if it gives no performance difference, so the tangible effect in my Lizard brain saysss yessss  In the end, to me a tangible effect isn't always about performance, sometimes it a sound or a look, or even a...... feeling  Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga
    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
×
×
  • Create New...