Jump to content
SAU Community

Usa Made Fortune Auto 500 Series Coilover - Feedback?

djvoodoo
 Share

Recommended Posts

djvoodoo Experienced

djvoodoo

Posted
Posted

So we all know about the taiwanese/china branded coilovers and there are plenty of threads on their performance.

I've been wondering about the Fortune Auto branded coilovers. They are in a higher price bracket ($1500 - $2000) and seem to have a good rep over in the US (being manufactured in the U.S.A)

They claim to have a larger monotube piston than most Jap/ china brands too. 50mm piston as opposed to 44mm of the more common types, which I do like the idea of.

Rebuildable, can be valved to suit etc etc.

Has anyone had experience with these as an alternative to BC/Blitz/Tein's ??

skylinecouple Experienced

skylinecouple

Posted
Posted

Was reading about them to. Seem good but only rebuild-able in the States. 50mm piston seems like overkill. Bilsteins are 44 I think and even with custom valving they are jiggly on bad roads. Spring rates would be the concern, I think they were 10 & 8kg weren't they ? Worth trying though.

djvoodoo Experienced

djvoodoo

Posted
  • Author
Posted

Standard spring rates for the fortuneauto's - 34R were 12kg F and 8KG R.

Agree that bad point is have to send off to USA for rebuilding. I'm sure good shops around Aus can prob do it though.

I'm not game enough to try them right now, but interesting brand.

skylinecouple Experienced

skylinecouple

Posted
Posted

My days of jiggly rides are over. Bought a Kia optima for business. I can't go back now. I have felt handling AND refinement all in one. Ok, so it isn't the razor sharp Skyline but damn, I'm going back to twin tube and softer springs. The BC V1's look good.

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

My days of jiggly rides are over. Bought a Kia optima for business. I can't go back now. I have felt handling AND refinement all in one. Ok, so it isn't the razor sharp Skyline but damn, I'm going back to twin tube and softer springs. The BC V1's look good.

I know how you feel. Had to use a mighty Hyundai Elantra for a couple of days and couldn't believe how well it handled the bumps! But not a suspension I would want in my Stagea. Ideally if I had loads of cash I would get HKS suspension with the in dash adjustment control.

djvoodoo Experienced

djvoodoo

Posted
  • Author
Posted

Get S-Tune spring rates and the dampers matched. Would be good then :)

I did end up purchasing 2nd hand S tune suspension off a forum member. Ride is BETTER than stock V spec setup.. unfortunately right rear shock knocks :-(

Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted

I did end up purchasing 2nd hand S tune suspension off a forum member. Ride is BETTER than stock V spec setup.. unfortunately right rear shock knocks :-(

sometimes the top strut top nut gets a little loose, check that :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • Dose Pipe Sutututu
      From Japan and back to Europe, my sh*tbox R34 GTT

      By Dose Pipe Sutututu · Posted

      Welcome back brother 
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...