Jump to content
SAU Community

Wtb M35 Exhaust (Full 3 Inch, Tubo Back) And A Set Of Tail Lights

walkoau

By walkoau,
in Four Door Family & Wagoneers

 Share

Recommended Posts

walkoau Mentor

walkoau

Posted
Posted

Hi Guys,

im after a full 3 inch exhaust to suit my M35 can swap my standard one plus cash your way if your looking to go back to standard.

also after a full set of tail lights including the center brake light at the top. i want to experiment with some LED shapes inside the lights.

Thanks

Justin

scotty nm35 Grand Master

scotty nm35

Posted
Posted

I have the tail lights and stop light, but they are perfect off a low K Axis. I won't be selling them cheap.

You looking for S/H exhausts, or shiny new parts?

walkoau Mentor

walkoau

Posted
  • Author
Posted

hey scotty,

If you Have the axis lights, i assume you have the reverse and the fog? thats what i have on mine but i actually want the 2 reverse lens....out of curiosity how much? sell them separately?

The exhaust, i really dont mind if its second hand or new. Just as long as the condition is good.

scotty nm35 Grand Master

scotty nm35

Posted
Posted

You have the snow pack. Are your wipers heated in the windscreen?

The Axis has the same snow pack, so I think the fog at the back. I will check tomorrow.

PN-Mad Grand Master

PN-Mad

Posted
Posted

not real sure about the wipers, but yeah mine is the axis with all the options except sunroof.

Oh, you got the stagea tent....?

If not, you don't have all the options :P

walkoau Mentor

walkoau

Posted
  • Author
Posted

Oh, you got the stagea tent....?

If not, you don't have all the options :P

that would be a rag top then hey? lol

i will chalk up another post for you guys!

ChrisB Rising Star

ChrisB

Posted
Posted (edited)

Think this post has been hijacked.

Now if I had 2 of those Stagea tents, I could put one on each side....hummm.

Must slow you down a bit though. Car would be inclined to take off like a bird hey....

I wonder if they come in Pink?

output_Y10%20%20001.gif

Edited by ChrisB
walkoau Mentor

walkoau

Posted
  • Author
Posted

Hi Guys,

im after a full 3 inch exhaust to suit my M35 can swap my standard one plus cash your way if your looking to go back to standard.

also after a full set of tail lights including the center brake light at the top. i want to experiment with some LED shapes inside the lights.

Thanks

Justin

Parts still needed! I don't need a bloody tent off the side of the Stagea though.

Are people just trying to get there post numbers up?

PN-Mad Grand Master

PN-Mad

Posted
Posted

There are cars wrecking you can buy lights off.

Exhaust options are everywhere, Scotty, jap systems from cat back, custom items.

You think something is going to land in your lap? Just have a look around. Don't be lazy.

joshm35 Veteran

joshm35

Posted
Posted

No thats just the way this forumn is. Rarely you will get a full system under 1600 unless its a little battered. Brand cat backs go for about 900-1200. www.justjap.com have a blitz cat back for about 1100 or you could source from japan but you will have to search for what you require. Or go to an exhaust shop and get one made. As in dumps you have 2 main options scotty dump (scotty mn35) and am performance (bigkevracing or ebay) hope this helps. Also there is or was a set of lights on ebay aswell not. Happy trails

walkoau Mentor

walkoau

Posted
  • Author
Posted

No thats just the way this forumn is. Rarely you will get a full system under 1600 unless its a little battered. Brand cat backs go for about 900-1200. www.justjap.com have a blitz cat back for about 1100 or you could source from japan but you will have to search for what you require. Or go to an exhaust shop and get one made. As in dumps you have 2 main options scotty dump (scotty mn35) and am performance (bigkevracing or ebay) hope this helps. Also there is or was a set of lights on

ebay aswell not. Happy trails

Thanks for your positive input mate. Wish more people were like you.

As for the lights on eBay, I checked them out, sent an offer of $150 they accepted but then proceeded to tell me they have recently been cracked....

walkoau Mentor

walkoau

Posted
  • Author
Posted

There are cars wrecking you can buy lights off.

Exhaust options are everywhere, Scotty, jap systems from cat back, custom items.

You think something is going to land in your lap? Just have a look around. Don't be lazy.

Wake up to yourself!

Isn't the forums about helping each other out?

I'm not lazy by any standards. I'm just seeing if anyone has second hand items I need. I know what's available new. You don't need to tell me, its common knowledge.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Dose Pipe Sutututu
      Mistakes were made, my R34 Story

      By Dose Pipe Sutututu · Posted

      Maybe it's time for a M3 F80 LCI, and leave it stock.  Drive it to a shop, sip on your latte with nutmeg whilst it gets serviced and on the way home swing by and grab some chai mix for the evening.
    • -Jimmy-
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By -Jimmy- · Posted

      Great work! Thanks for documenting the process.
    • joshuaho96
      Squeaking clutch/throw out bearing

      By joshuaho96 · Posted

      How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • Dobz
      [Geelong,Vic] Used: pull type R33 GTR gearbox (no transfer case), Nismo super coppermix twin plate clutch

      By Dobz · Posted

      price drop $1000 gbox $400 clutch
    • sonicii
      Who has a Infiniti Q60, Q50 (V37)?

      By sonicii · Posted

      yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
×
×
  • Create New...