Jump to content
SAU Community

Tuned Performance Dyno Day - 22/03


Recommended Posts

no they don't... But you just keep trying to tell yourself that

Both Bodo's and mine made more power than Zeke's and Zac's and they are all running the same mods...follow the evidence :P

Cadmoon, what mods do you have?

The RB20det in my Silvia has 210hp at the wheels with stock turbo and injectors, only mod is a intercooler and exhaust.

Also it has leaking intercooler piping which is not helping the fact.

The RB20 is generally underrated , in a light car like an S13 it will leave most SR20s for dead.

I have since changed the Turbo to a GT2860rs I have a Niztune ECU, 660 cc injectors and a Z32 AFM ready to go in, should make around the 300HP atw, not too bad for a car weighing under 1.3 tonne.

All I have power wise on mine is 3" turbo back exhaust, front mount, turbosmart boost tee running about 9-10 psi, yellow jacket coils and a pod filter in a home made air box with cold air intake.

Yeah I've heard a few people say the RB20 is a good motor to put in Silvias.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...