Jump to content
SAU Community

Recommended Posts

Honestly, the legalities in running a single (if your tight on cash, try engineering the car to run a single legally), just stick with the twins, the car remains stock looking under the hood.

Dont go bigger than -5, the lag will cost you time on the street as it is on -5's at worst, as you go down the turbo choise, they come on earlier, on the street you need response.

Remember you have a stock bottom end, you also have your limits to reliable power, as your apporching 400Kw its a ticking costly time bomb unless you spend on forged internals.

Pick a power level, select the smallest turbos to comfortably reach that goal without winding the shit out of them, you want the car to hammer from down low, the engine and turbos to last also if your Mrs has one in the oven......once the kid comes im sure you will be out of cash. :)

Edited by GTRPSI
Honestly, the legalities in running a single (if your tight on cash, try engineering the car to run a single legally), just stick with the twins, the car remains stock looking under the hood.

Dont go bigger than -5, the lag will cost you time on the street as it is on -5's at worst, as you go down the turbo choise, they come on earlier, on the street you need response.

Remember you have a stock bottom end, you also have your limits to reliable power, as your apporching 400Kw its a ticking costly time bomb unless you spend on forged internals.

Pick a power level, select the smallest turbos to comfortably reach that goal without winding the shit out of them, you want the car to hammer from down low, the engine and turbos to last also if your Mrs has one in the oven......once the kid comes im sure you will be out of cash. :)

Agreed, but it's a gtr, they will always find something to defect, but I'm also one for not trying to gain unwanted attention either, I guess the single is just pure want factor. And found a cheap setup, so that's why I asked, I've now got my answers. Cheers the guys that made useful replies!

And as for remembering about the stock bottom end, yes how can I forget lol, that's why I mentioned about keeping the boost as low as possible without sacrificing power too much. The only plus side is, it doesn't get to much unneeded use, owned it for 18 months and only travelled 7500kms.

And yes thanks for the reminder, I thought I knew what broke street was, I can only imagine what the future holds. But just happy to be in a fortunate position to be able to keep the car. As I always have done. Nothing wrong with having a toy, even if it just sits in the garage as a focal point ATM! Thanks for your help mate.

Well have a think about the extra issues your going to have with defects and bills mounting up around you, you dont want to be adding fuel to the fire with a family now.

At least you have a GTR before you had a kid.

I watched them racing at bathurst when my boy was 3 months old and swore when i had money id buy one, paying rent, buying nappies, paying for school, working 6 days a week to make ends meet, i had to wait till he was 16 till i paid off a house and could afford one.

Damn shit then took the keys off me when he turned 21. :)

I'm hearing you mate, I'm no rich kid, everything I have I've worked the last 10 years for since the age of 15. Hardest thing was explaining to the mrs how swapping my ve ss for the gtr plus abit of cash my way, wouldn't end up being a mistake, the car has now sat here for the last 6months, I did have a perfectly fine mildly modded ss, to a gtr, that's spent more time off the road then on, but that's mainly down to me not wanting to drive a car that's not running 100%. So I brought the mrs a nicer car. She had a Hyundai Getz, I hated having to drive that from time to time, and got a xr6 turbo, she loves the sunroof n leathers, and I love the turbo lol. But hopefully I'll get a chance to give my kid my gtr when the time is right. Not that they would probly be interested in such an old car in 21years time.

But hopefully I'll get a chance to give my kid my gtr when the time is right. Not that they would probly be interested in such an old car in 21years time.

if they see how much their dad loves the GTR....i'm sure they would be able to appreciate it in time to come :)

  • Like 1

Just my luck, brand new pair of -10's up for sale in f/a section in my area and a good price

The -10's will be worse than the -5's in terms of lagginess. If you want that much top end power you can go E85 on a smaller set of snails and keep your response.

from memory, the laggiest to most responsive 2860's goes from -10, -5, -9, -7's. But the 9's and 7's are pretty close with the 9's being the newer design with better top end.

The -10's will be worse than the -5's in terms of lagginess. If you want that much top end power you can go E85 on a smaller set of snails and keep your response.

from memory, the laggiest to most responsive 2860's goes from -10, -5, -9, -7's. But the 9's and 7's are pretty close with the 9's being the newer design with better top end.

That's what I mean by just my luck, that there 10s and not 5s but all good. I'll find some.

Has anyone run the t517z twins? Also a set of them for sale on here.

Mate if you're interested I have a set of -5s that are so new they have done zero kms. they were on the engine, the engine was started bad then the engine was removed (builder f**ked up) if you're interested we should be able to work out a deal

Theyre in wetherill park

  • Like 1

I run a pair of t517z 10cm's on my r32, also had -5's on my previous Gtr.

They are fairly leggy but can produce lots of grunt for a low mount. I'm not sure which I would pick, but the t517z setup is faster I feel. Not heaps in it, if you went for 8cm housings try wound be very similar to -5's I'd say.

The trust turbos are a near install as they don't have water cooling.

  • Like 1

Although it has been pointed out to you a few times you don't appear to have got the message - boost is not a factor in the life of your engine. Max power is a factor and to look after your engine you need a good tune, good maintenance with quality synthetic oil and sympathetic driving.

I just need to point out that boost isn't what kills motors. So lower boost doesn't mean it will last longer. Yes, it will reduce the potential for knock, but that's pretty much all.

Boost is a figure that combines the air volume being "pushed" and the amount of restriction (generally caused by the hot side of the turbo). So it is better to think of it as a power efficiency scale than directly a power scale. That's a major factor why you see so many differing power levels at say 18 PSI.

Now power is power, and power means forces at play on the internals of your motor. There are a number of 400kw cars running around on stock internals. But if you speak honestly to any of the owners they are generally know they will have to rebuild the bottom end at some point and have accepted it. If you want a reliable and dependable car then stick with 300kw on 98 or around 340kw on e85. It's proven that a stock bottom end can take that level and survive a pretty long time.

So I agree with Piggaz that you should be looking at -9 or -5 turbos. -7's and -10's aren't as efficient so there will be trade off. If you go -5 you have the option to add the supporting mods and go for 400 on e85 but will be pushing a lot of boost and need big injectors etc. -9's on e85 gets you efficiently to say 340kw.

Pushing above that level you can take your chances. Just want to make sure you understand that. The problem with forums is that it is too easy to read about someone's build and it seems easy to make power. There is no "easy" about it. And the cost curve isn't linear - you can't just do another $5k upgrade and hit a power level. It all has to balance out.

(long post, but hope you find it helpful)

Although it has been pointed out to you a few times you don't appear to have got the message - boost is not a factor in the life of your engine. Max power is a factor and to look after your engine you need a good tune, good maintenance with quality synthetic oil and sympathetic driving.

I've got the message loud and clear mate, so I should be able to turn my boost up to 40 psi and have no problems then. (40 psi the highest my ebc will go go or I'd go higher) so what about the people who have had a problem with their cars over boosting and costing them an engine etc?

Btw I'm not trying to say it does or doesn't, simple as that, obviously the car will get a good tune as it always has, (powertune) currently! And for the others who said bigger injectors etc, try reading the bloody start of the thread, clearly says the car runs on e85, has upgraded fuel system. Can't see how the car would run on e85 with standard injectors.

Just to make it clear it has a Walbro pump, sard fuel rail, sard injecters, sard fpr!

I just need to point out that boost isn't what kills motors. So lower boost doesn't mean it will last longer. Yes, it will reduce the potential for knock, but that's pretty much all.

Boost is a figure that combines the air volume being "pushed" and the amount of restriction (generally caused by the hot side of the turbo). So it is better to think of it as a power efficiency scale than directly a power scale. That's a major factor why you see so many differing power levels at say 18 PSI.

Now power is power, and power means forces at play on the internals of your motor. There are a number of 400kw cars running around on stock internals. But if you speak honestly to any of the owners they are generally know they will have to rebuild the bottom end at some point and have accepted it. If you want a reliable and dependable car then stick with 300kw on 98 or around 340kw on e85. It's proven that a stock bottom end can take that level and survive a pretty long time.

So I agree with Piggaz that you should be looking at -9 or -5 turbos. -7's and -10's aren't as efficient so there will be trade off. If you go -5 you have the option to add the supporting mods and go for 400 on e85 but will be pushing a lot of boost and need big injectors etc. -9's on e85 gets you efficiently to say 340kw.

Pushing above that level you can take your chances. Just want to make sure you understand that. The problem with forums is that it is too easy to read about someone's build and it seems easy to make power. There is no "easy" about it. And the cost curve isn't linear - you can't just do another $5k upgrade and hit a power level. It all has to balance out.

(long post, but hope you find it helpful)

Thanks mate very useful, appreciate the time n effort

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...