Jump to content
SAU Community

Recommended Posts

I have an R33 Gtst s2 and a few weeks ago i went to pick up my girlfriend from the airport and since i live in ballarat it is a long drive there and back so i filled up my tank almost full and since then the car has been surging, i never normaly put that much fuel in the tank and its usually half full as a maximum cos i dont drive much so i thought it might have something to do with filling the tank full cos it may have had some crud buildup higher up on the tank that isnt usually disturbed but it could be anything really, i filled up at the usual place and i put the 91 octane stuff in cos the car runs rich so since it wastes alot of fuel it makes sense to put the cheaper stuff in. Anyways i have just put new plugs and a fuel filter in and it didnt fix it and i just put some injector cleaner in it and im going to give it a big long drive tomorrow. It seems to only surge when im accelerating so if im sitting on the freeway its good but if im just getting onto the freeway and accelerating upto speed it will surge, does anyone have any hints on what could be the oroblem or can tell me what i can check next

Link to comment
https://www.sau.com.au/forums/topic/440754-surging/
Share on other sites

I have an R33 Gtst s2 and a few weeks ago i went to pick up my girlfriend from the airport and since i live in ballarat it is a long drive there and back so i filled up my tank almost full and since then the car has been surging, i never normaly put that much fuel in the tank and its usually half full as a maximum cos i dont drive much so i thought it might have something to do with filling the tank full cos it may have had some crud buildup higher up on the tank that isnt usually disturbed but it could be anything really, i filled up at the usual place and i put the 91 octane stuff in cos the car runs rich so since it wastes alot of fuel it makes sense to put the cheaper stuff in. Anyways i have just put new plugs and a fuel filter in and it didnt fix it and i just put some injector cleaner in it and im going to give it a big long drive tomorrow. It seems to only surge when im accelerating so if im sitting on the freeway its good but if im just getting onto the freeway and accelerating upto speed it will surge, does anyone have any hints on what could be the oroblem or can tell me what i can check next

I'm assuming standard ECU, injectors, pump, AFM, boost.

You should be putting 98RON fuel in. Otherwise, the ECU retards the engine because it'll ping.

What spark plugs did you put in? Gap? It could be hitting R&R (too much boost), could be bad AFM (replace/solder fix AFM), could be bad fuel pump. First thing I'd do is drain the fuel tank and put 98 RON fuel in.

Link to comment
https://www.sau.com.au/forums/topic/440754-surging/#findComment-7233110
Share on other sites

yep. problem is 91. 95 is fine. 98 is better.

for now disconnect you r battery for 24 hours, to reset the ecu. it swill remapp itself and may get out of trouble for now.

but id start adding 98ron as soon as possible.

once all the 91 is gone reset the ecu again to remap for better fuel

as a start.

as niz said above you could have a problem too.

Link to comment
https://www.sau.com.au/forums/topic/440754-surging/#findComment-7233120
Share on other sites

yep. problem is 91. 95 is fine. 98 is better.

for now disconnect you r battery for 24 hours, to reset the ecu. it swill remapp itself and may get out of trouble for now.

but id start adding 98ron as soon as possible.

once all the 91 is gone reset the ecu again to remap for better fuel

as a start.

as niz said above you could have a problem too.

ECU doesn't remap shit.. it has a pre-defined ignition & injection table.. the only closed loop is the idle & knock feedback.

If you insist in running 91RON, just retard the base timing like 4~5 degrees so at idle it's at 11 degrees BTDC

Link to comment
https://www.sau.com.au/forums/topic/440754-surging/#findComment-7234853
Share on other sites

UPDATE

after changing all that stuff it ended up being the injectors, they were clogged from running that cheap 91 octane crap, i put a bottle of injector cleaner in it and its all good now. I only started putting it in a year ago cos the car is running so rich and dumping most of the good 98 out the exhaust so cos of that i used 91 and that dirty crap clogged up everything.

Let this be a lesson to anyone else running rich and thinking of putting the cheap crap in cos its spittin your good unburnt 98 out the rear, its not worth it, get your car tuned instead cos it will save you alot of headaches

Link to comment
https://www.sau.com.au/forums/topic/440754-surging/#findComment-7238762
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...