Jump to content
SAU Community

Recommended Posts

Sweet! I have been waiting patiently for an update.

I bet you are hanging to get it running!

Yeah i am hanging i have just been so busy and on over seas trips and also setting uo my own business so i have kinda swept it to the side for a bit its killing me looking at such a mint cond 33 gtr sitting in garage wirh no engine

I got some brand new id 2000s and a custom billet twin entry rail that came off a 1200 hp 32gtr so I think I will be flowing sweet.

Just need to wait for the engine to come back and rips fuel system bolt all the fuel system im and sort out the plumbing what do you guys do run tefl9n flewi p clamped up chasis -8 to both fuel rail and reg or -6 what would be better ?

  • Like 1
  • 2 months later...

Ok guys engine has landed in Australia now will be sitting on my engine stand very soon

Quick question i have re moved standard rb26 oil filter housing im running a greed ex oil cooler kit with remote filter is it best to wack an rb20 filter housing on the engine to screw the oil kit adapter plate on ?

Got a pick of the kit, mine have always just gone on where the filter bolts onto the factory oil/water heat transfer

Is it oil cooler only or relocator to ?

If just cooler the Z145A might not fit correctly, I use a Z131 instead ( will have to double check that to be 100%, it's been a while since I have done an oil change on that car )

  • 3 weeks later...

Rips bottem end build stock 30 with prep upgrade rips baffled sump with tomei oil pump

Kelford cams head build mild port and polish with kelford 274 cam shafts and tomei cam gears

More to list i will do it soon

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...