Jump to content
SAU Community

Recommended Posts

Fairly new to skylines as ive only had my r33 for about a month. I want to have a crack at drift but the stock viscous lsd is very loose and unpredictable. I've done a bit of research and from what I've read the viscous lsds aren't worth wasting money on (correct me if I'm wrong).

So what are my best value for money options considering the car will still be driven on the road from time to time. ( I have no interest in welding my diff I'd rather do it right and do it once)

- Buy an new aftermarket lsd such as kaaz, nismo, cusco (expensive. Are they worth the money?)

-buy a second hand diff with aftermarket lsd installed from an importer. ( a little less expensive and lsd is already installed but worried I will get one that's worn out and needs rebuilding which could get costly)

- from what I have read Gtrs had a mechanical 2 way that works well when shimmed/rebuilt will these fit in a gtst how much work is involved and what kind of money would this set me back.

Any advice from someone with experience would be greatly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/441360-r33-gtst-lsd-diff-options/
Share on other sites

Lots of guys into drift run a 2 way but either will suit your purposes really. All of the above-mentioned brands would be fine as they are tried and tested. Kaaz have good support and make all the clutches etc. available for rebuild if it becomes worn out down the track, unsure about availability of the others.

As above, most drift guys will likely run a 2 way over a 1.5 way.

I bought my Kaaz 1.5 way diff centre second hand from Yahoo auctions Japan and had it shipped over through Jesse Streeter. I think the 2 way diffs were even less as there were more around than the 1.5 ways when I was looking.

Cost me a bit less than $500 delivered. Had it refurb'd and reshimmed locally, then installed into my existing diff housing. Cost me around $1000 by the time it was in my car.

Diff is super tight and haven't looked back!

Best option is R34 helical. Found on later model coupe GTT only R34 manual. Good luck !

Won't need rebuilt, better street diff than clutch-type but not as good for 100% balls-out lifted wheel action on a track.

My mechanical is noisy. It makes the inside wheel skip and chatter on turns, and gives the car a good shake when cold.

It's not a daily driver though so I don't mind it.

Throw in OS GIKEN 80W-250. Calmed down my GT Pro by 90%.
  • 2 weeks later...
My mechanical is noisy. It makes the inside wheel skip and chatter on turns, and gives the car a good shake when cold.

It's not a daily driver though so I don't mind it.

Add limslip or use Nulon SAE90 GL5 oil. Mines pretty good and you don't even notice it half the time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
    • Ahhhh... If you were putting 12V to the led in there, that's likely made it very unhappy. Chances are how you put power, was 12V across an LED that's meant to only have about 20mA through it at peak, and a forward voltage of about 1.8 to 2.4 volts. That circuit is likely only a 3V3 circuit, and will have a resistor in series with the led too. That's my guesstimate on that light, without having touched one.
    • Another vote for installing them and see how you go.  I mean, you already own them, why would you not fit them? 
    • I have had too many of those over the years, my cars have a toolkit or at minimum a cheapy multi tool thing because its too easy to be snookered by some stupid plastic clip that stops you checking the battery terminal isn't loose.
    • Basically, if there is a part# on the nissan catalogue, it is a genuine part. There is a thing called "new old stock" which is stuff made years ago but never sold (or landfilled), but it is super hit and miss what you can buy. Other than some expensive Nismo stuff there is nothing new being made that suits these cars. The only time to be a little careful is (mostly in the US I think, but maybe Japan too), Nissan started rebranding some cheap crap maintenance parts like oil filters as "Pitworks"; stay away from them, if you are buying cheap just buy whatever the local car parts shop carries The three part numbers have an explanation on Amayama: 0V005 is auto, base style 0V015 is manual 0V505 is auto, hectic momo branded ones, maximum F&F points there!
×
×
  • Create New...