Jump to content
SAU Community

Recommended Posts

Man if its only temporary, i'd suggest an APEXI SAFC.....Yes yes i know they are old tech but they work very well for stock/mild cars and are mega cheap these days. $100 for an SAFC and $150 to tune it you could run your highflow and even up the boost a tad, then when you get some extra cash you can always get your money back for the SAFC. Just a thought.

This could be read as it is safe to run 22psi on the stock ecu with a highflow, which is very wrong.

Please fix your post so we keep everything accurate.

What is the correct maximum amount of boost you have safely run on a stock ECU with a highflow?

yep thats how i read it

how would the car perform with the highflow turbo and no tune?

I will post a photo of my turbo for more understanding haha

why highlow, just get rebuilt turbo....with wheels that dont self destruct

Old turbo died and took out motor... coin spent on new motor, ideally wants more power, but doesnt want to spend more money... hmmmmmmm

I would rather spend $900 on a cheap nistune + tune than getting a different turbo for "reliability".

This sounds like good advice.

no nistune option is cheap for an r33....if you dont know this already you do now, so you can stop giving crappy advice :P

Man if its only temporary, i'd suggest an APEXI SAFC.....Yes yes i know they are old tech but they work very well for stock/mild cars and are mega cheap these days. $100 for an SAFC and $150 to tune it you could run your highflow and even up the boost a tad, then when you get some extra cash you can always get your money back for the SAFC. Just a thought.

SAFC can only bend the AFRs, however it does not change timing.. if you look at the stock R33 map, timing values are around 22 on noise, which is heaps if you decent to add in more boost.

Like I said, best option is a Toshi remap.. happy days pump nearly 1 bar into motor no knock, and happy AFRs

no nistune option is cheap for an r33....if you dont know this already you do now, so you can stop giving crappy advice :P

oh ok. thought it'd just be like a daughter board or something... pulsar ftw

SAFC can only bend the AFRs, however it does not change timing.. if you look at the stock R33 map, timing values are around 22 on noise, which is heaps if you decent to add in more boost.

Like I said, best option is a Toshi remap.. happy days pump nearly 1 bar into motor no knock, and happy AFRs

The SAFC doesn't bend AFR's, it bends the Airflow meter signal, which in turn causes the ECU to reference different cells(Fuel AND Timing) than it would without the AFC.....plus i only recommended it as a cheap alternative till he sorts out a proper ECU ;)

The SAFC doesn't bend AFR's, it bends the Airflow meter signal, which in turn causes the ECU to reference different cells(Fuel AND Timing) than it would without the AFC.....plus i only recommended it as a cheap alternative till he sorts out a proper ECU ;)

Yeah I know what you mean, I just said AFR because bending the AFM signals causes the AFRs to change.

However you do realise that will cause the ECU to reference cells with less load = more timing right?

Yeah I know what you mean, I just said AFR because bending the AFM signals causes the AFRs to change.

However you do realise that will cause the ECU to reference cells with less load = more timing right?

Ofcourse, however in the last few 33's i've installed these into drive great and do not ping at 11-12PSI(11.5-ish AFR)

Edited by Super Drager

Old turbo died and took out motor... coin spent on new motor, ideally wants more power, but doesnt want to spend more money... hmmmmmmm

I would rather spend $900 on a cheap nistune + tune than getting a different turbo for "reliability".

This sounds like good advice.

its all good! going R + R is good motivation to get the ECU upgraded.

I admit making an mistake quoting the maximum boost level safe to run on stock ecu earlier. Been corrected and that it should be no higher then 10psi.

Reason of having the high flow, as cost wise is similar or cheaper then to rebuild, similar drive ability working with factory ecu, making good power when other supporting mods are present, and proven by time to last.

For a budget ECU upgrade you can get Toshi to remap based on factory injectors and AFM. I've personally sent few customers that direction and worked well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...