Jump to content
SAU Community

Recommended Posts

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

UPDATED PRICE LIST

$150 NPC 400kW Clutch Plate - Barely Used, worn 0.03mm / Will fit any RB
$180 Yellow Jacket Coil Packs for RB25DET S1.2/2, Stagea Non-Neo RB25DET (7x coils) - happily held 1.2 bar of boost
$10 Alloy BOV Bung/Plug
$10 110L/h Fuel Pump that fits in stock position
SOLD 2x Falken Azensis RT615 225/35/17 with around 3mm tread

$40 BRAND NEW Braided Oil Feed Line for Stock RB25DET Turbo
$40 BRAND NEW OEM Rear Main Seal & Spigot Bush for RB2xDExx motors - 12279-5L310

$200 RB25DET S2 Turbo - no shaft play, exhaust wheel in one piece
$20 RB25DET S2 Factory dump pipe & down pipe
$20 RB25DET/RB20DET Factory Manifold
SOLD $40 RB25DET S2 AFM
$20 RB25DET S2 Stock Blow Off Valve
$10 RB25DET S2 Radiator
$10 RB25DET S2 Fan Clutch
$50 RB25DET S2 Stock SMIC & Pipes
SOLD $200 RB25DET S2 ABS Diff - minus ABS sensor

SOLD $20 RB25DET S2 Stock Anti Roll bars / Sway Bars (back)
$20 RB25DET S2 Stock Anti Roll bars / Sway Bars (front)
$10 RB25DET S2 Rubber Intake Pipe
$10 RB25DET S2 handbrake boot & gear boot (1x OEM 1x Aftermarket)
$10 RB25DET S2 HICAS Rack & Tie Rods

$10 SR20DET S15 Radiator

Keep seeing your npc clutch plate for sale, wondering if ill save much getting the plate from you and the rest jew from npc, as ive been wanting to get the npc carbotic 10" clutch to replace my slipping one...

Keep seeing your npc clutch plate for sale, wondering if ill save much getting the plate from you and the rest jew from npc, as ive been wanting to get the npc carbotic 10" clutch to replace my slipping one...

Call up NPC and speak to Doug, OR alternatively, call Scott at Western Clutch at St Mary's and ask if he can sort you out. He uses the same pressure plates as Doug uses in his NPC clutch kits but sets the clamp only at ~1700kgs so the car is more driveable where as Doug goes for the moon.

Scott tested mine and it was over 1900kg of clamping force making the car a bucket of shit to drive and he reconfigured it to around 1700kg.. the car drives like a Yaris now after he curved my new clutch disc.

Il take the rubber intake pipe.. pm me payment details and postage costs.

Cheers

You sure you want it? Postage would be as much as the item lol

UPDATED PRICE LIST

$40 BRAND NEW Braided Oil Feed Line for Stock RB25DET Turbo
$40 BRAND NEW OEM Rear Main Seal & Spigot Bush for RB2xDExx motors - 12279-5L310
$150 NPC 400kW Clutch Plate - Barely Used, worn 0.03mm / Will fit any RB
$10 Alloy BOV Bung/Plug
$10 110L/h Fuel Pump that fits in stock position
$200 RB25DET S2 Turbo - no shaft play, exhaust wheel in one piece & no snapped studs
$20 RB25DET S2 Factory dump pipe & down pipe
$20 RB25DET/RB20DET Factory Manifold
$20 RB25DET S2 Stock Blow Off Valve
$10 RB25DET S2 Radiator
$10 RB25DET S2 Fan Clutch
$50 RB25DET S2 Stock SMIC & Pipes
$20 RB25DET S2 Stock Anti Roll bars / Sway Bars (front)
$10 RB25DET S2 Rubber Intake Pipe
$10 RB25DET S2 handbrake boot & gear boot (1x OEM 1x Aftermarket)
$10 RB25DET S2 HICAS Rack & Tie Rods
$10 SR20DET S15 Radiator

SOLD $180 Yellow Jacket Coil Packs for RB25DET S1.2/2, Stagea Non-Neo RB25DET (7x coils) - happily held 1.2 bar of boost
SOLD 2x Falken Azensis RT615 225/35/17 with around 3mm tread
SOLD $40 RB25DET S2 AFM
SOLD $200 RB25DET S2 ABS Diff - minus ABS sensor
SOLD $20 RB25DET S2 Stock Anti Roll bars / Sway Bars (back)

UPDATED PRICE LIST

$40 BRAND NEW Braided Oil Feed Line for Stock RB25DET Turbo
$40 BRAND NEW OEM Rear Main Seal & Spigot Bush for RB2xDExx motors - 12279-5L310
$150 NPC 400kW Clutch Plate - Barely Used, worn 0.03mm / Will fit any RB
$10 Alloy BOV Bung/Plug
$10 110L/h Fuel Pump that fits in stock position
$20 RB25DET S2 Factory dump pipe & down pipe
$20 RB25DET/RB20DET Factory Manifold
$20 RB25DET S2 Stock Blow Off Valve
$10 RB25DET S2 Radiator
$10 RB25DET S2 Fan Clutch
$50 RB25DET S2 Stock SMIC & Pipes
$20 RB25DET S2 Stock Anti Roll bar / Sway Bar (front)
$10 RB25DET S2 Rubber Intake Pipe
$10 RB25DET S2 handbrake boot & gear boot (1x OEM 1x Aftermarket)
$10 RB25DET S2 HICAS Rack & Tie Rods
$10 SR20DET S15 Radiator

SOLD $150 Yellow Jacket Coil Packs for RB25DET S1.2/2, Stagea Non-Neo RB25DET (7x coils) - happily held 1.2 bar of boost
SOLD 2x Falken Azensis RT615 225/35/17 with around 3mm tread
SOLD $40 RB25DET S2 AFM
SOLD $200 RB25DET S2 ABS Diff - minus ABS sensor
SOLD $20 RB25DET S2 Stock Anti Roll bars / Sway Bars (back)

SOLD $180 RB25DET S2 Turbo - no shaft play, exhaust wheel in one piece & no snapped studs

  • 2 weeks later...
  • 3 weeks later...

$40 BRAND NEW Braided Oil Feed Line for Stock RB25DET Turbo

$40 BRAND NEW OEM Rear Main Seal & Spigot Bush for RB2xDExx motors - 12279-5L310
$10 Alloy BOV Bung/Plug
$10 110L/h Fuel Pump that fits in stock position
$20 RB25DET S2 Factory dump pipe & down pipe
$20 RB25DET/RB20DET Factory Manifold
$20 RB25DET S2 Stock Blow Off Valve
$10 RB25DET S2 Radiator
$10 RB25DET S2 Fan Clutch
$50 RB25DET S2 Stock SMIC & Pipes
$20 RB25DET S2 Stock Anti Roll bar / Sway Bar (front)
$10 RB25DET S2 Rubber Intake Pipe
$10 RB25DET S2 handbrake boot & gear boot (1x OEM 1x Aftermarket)
$10 RB25DET S2 HICAS Rack & Tie Rods
$10 SR20DET S15 Radiator

SOLD $150 Yellow Jacket Coil Packs for RB25DET S1.2/2, Stagea Non-Neo RB25DET (7x coils) - happily held 1.2 bar of boost
SOLD 2x Falken Azensis RT615 225/35/17 with around 3mm tread
SOLD $40 RB25DET S2 AFM
SOLD $200 RB25DET S2 ABS Diff - minus ABS sensor
SOLD $20 RB25DET S2 Stock Anti Roll bars / Sway Bars (back)

SOLD $180 RB25DET S2 Turbo - no shaft play, exhaust wheel in one piece & no snapped studs

SOLD $150 NPC 400kW Clutch Plate - Barely Used, worn 0.03mm / Will fit any RB

  • 2 weeks later...

Yezz.. sold clutch & rear main seal :)

$40 BRAND NEW Braided Oil Feed Line for Stock RB25DET Turbo

$10 Alloy BOV Bung/Plug

$10 110L/h Fuel Pump that fits in stock position
$20 RB25DET S2 Factory dump pipe & down pipe
$20 RB25DET/RB20DET Factory Manifold
$20 RB25DET S2 Stock Blow Off Valve
$10 RB25DET S2 Radiator
$10 RB25DET S2 Fan Clutch
$50 RB25DET S2 Stock SMIC & Pipes
$20 RB25DET S2 Stock Anti Roll bar / Sway Bar (front)
$10 RB25DET S2 Rubber Intake Pipe
$10 RB25DET S2 handbrake boot & gear boot (1x OEM 1x Aftermarket)
$10 RB25DET S2 HICAS Rack & Tie Rods
$10 SR20DET S15 Radiator

SOLD $150 Yellow Jacket Coil Packs for RB25DET S1.2/2, Stagea Non-Neo RB25DET (7x coils) - happily held 1.2 bar of boost
SOLD 2x Falken Azensis RT615 225/35/17 with around 3mm tread
SOLD $40 RB25DET S2 AFM
SOLD $200 RB25DET S2 ABS Diff - minus ABS sensor
SOLD $20 RB25DET S2 Stock Anti Roll bars / Sway Bars (back)

SOLD $180 RB25DET S2 Turbo - no shaft play, exhaust wheel in one piece & no snapped studs

SOLD $150 NPC 400kW Clutch Plate - Barely Used, worn 0.03mm / Will fit any RB

SOLD $40 BRAND NEW OEM Rear Main Seal & Spigot Bush for RB2xDExx motors - 12279-5L310

  • 2 weeks later...
  • 2 weeks later...

$40 BRAND NEW Braided Oil Feed Line for Stock RB25DET Turbo

$10 Alloy BOV Bung/Plug

$10 110L/h Fuel Pump that fits in stock position
$10 RB25DET S2 Factory dump pipe & down pipe
$10 RB25DET/RB20DET Factory Manifold
$10 RB25DET S2 Stock Blow Off Valve
$10 RB25DET S2 Radiator
$10 RB25DET S2 Fan Clutch
$50 RB25DET S2 Stock SMIC & Pipes
$20 RB25DET S2 Stock Anti Roll bar / Sway Bar (front)
$10 RB25DET S2 Rubber Intake Pipe
$10 RB25DET S2 handbrake boot & gear boot (1x OEM 1x Aftermarket)
$10 RB25DET S2 HICAS Rack & Tie Rods
$10 SR20DET S15 Radiator

SOLD $150 Yellow Jacket Coil Packs for RB25DET S1.2/2, Stagea Non-Neo RB25DET (7x coils) - happily held 1.2 bar of boost
SOLD 2x Falken Azensis RT615 225/35/17 with around 3mm tread
SOLD $40 RB25DET S2 AFM
SOLD $200 RB25DET S2 ABS Diff - minus ABS sensor
SOLD $20 RB25DET S2 Stock Anti Roll bars / Sway Bars (back)

SOLD $180 RB25DET S2 Turbo - no shaft play, exhaust wheel in one piece & no snapped studs

SOLD $150 NPC 400kW Clutch Plate - Barely Used, worn 0.03mm / Will fit any RB

SOLD $40 BRAND NEW OEM Rear Main Seal & Spigot Bush for RB2xDExx motors - 12279-5L310

  • 2 weeks later...

$40 posted on the oil feed line?

Waiting on one dude to pick it up, if he falls through its yours for 45$ posted :)

$40 BRAND NEW Braided Oil Feed Line for Stock RB25DET Turbo ~ PENDING

Will take everything here for a 6 pack of beer:

$10 Alloy BOV Bung/Plug

$10 RB25DET S2 Fan Clutch
$20 RB25DET S2 Stock Anti Roll bar / Sway Bar (front)
$10 RB25DET S2 handbrake boot & gear boot (1x OEM 1x Aftermarket)
$10 RB25DET S2 HICAS Rack & Tie Rods
$10 SR20DET S15 Radiator


SOLD $150 Yellow Jacket Coil Packs for RB25DET S1.2/2, Stagea Non-Neo RB25DET (7x coils) - happily held 1.2 bar of boost
SOLD 2x Falken Azensis RT615 225/35/17 with around 3mm tread
SOLD $40 RB25DET S2 AFM
SOLD $200 RB25DET S2 ABS Diff - minus ABS sensor
SOLD $20 RB25DET S2 Stock Anti Roll bars / Sway Bars (back)

SOLD $180 RB25DET S2 Turbo - no shaft play, exhaust wheel in one piece & no snapped studs

SOLD $150 NPC 400kW Clutch Plate - Barely Used, worn 0.03mm / Will fit any RB

SOLD $40 BRAND NEW OEM Rear Main Seal & Spigot Bush for RB2xDExx motors - 12279-5L310

SOLD $10 RB25DET S2 Rubber Intake Pipe

SOLD $10 110L/h Fuel Pump that fits in stock position

SOLD $10 RB25DET S2 Factory dump pipe & down pipe
SOLD $10 RB25DET/RB20DET Factory Manifold
SOLD $10 RB25DET S2 Stock Blow Off Valve
SOLD $10 RB25DET S2 Radiator

SOLD $50 RB25DET S2 Stock SMIC & Pipes

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The attached document is fine. I just downloaded & opened it.
    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
×
×
  • Create New...