Jump to content
SAU Community

Rb26 Pull-Style And Rb25 Push-Style Starter And Flywheel The Same?

3bar_dc2
 Share

Recommended Posts

3bar_dc2 Newbie

3bar_dc2

Posted
Posted

Hello,

I'm doing a R33 RB26 swap into a S14 chassis. I've done the RB25 swap before, but first time with RB26. I've done a lot of searching but keep finding conflicting answers.

I know I need to use the RB25 rwd transmission and a RB25 clutch kit, and I plan on using the R33 rb25 trans with the push style clutch. But can I use my current RB26 flywheel and starter? The current clutch setup on my r33 engine is for a pull-style clutch, but I don't know what's different about the flywheel and starter between the pull-style and the push-style.

The part number on my starter is 23300 20P05 if that helps.

Thanks,

Sean

3bar_dc2 Newbie

3bar_dc2

Posted
  • Author
Posted

starter appears to be the same

It doesn't list r32 rb26dett which is what leads me to believe that the starter is different from the push style r32 rb26 clutch and the pull style r33 rb26 clutch. I think the later rb25 and the neo we're pull style which is why they're on that list. Thanks for posting as it leads me to believe they're different I just don't know why.

Ring clutch place. Instant answer.

That's not so easy to do here in the US. I know the clutch set is different from push to pull clutch style. I want to know what is different about the flywheel and starter. Maybe the flywheel has a different amount of teeth? I'm guessing the starter and flywheel have to match? Can I use the rb25 push style clutch and trans with the r33 rb26dett pull style flywheel and starter?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Marek
      Hi everyone.

      By Marek · Posted

      Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • Dose Pipe Sutututu
      Ethanol Content Sensor - Always at 11%?

      By Dose Pipe Sutututu · Posted

      and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
    • soviet_merlin
      Ethanol Content Sensor - Always at 11%?

      By soviet_merlin · Posted

      Oh, you are right. But, in Australia E10 is based on 91RON fuel and ends up being 94RON. Hence it being the cheaper option for economy cars. The more performance oriented cars go for the 98RON fuel that has no ethanol mixed in. The only step up we have left then at some petrol stations is E85.
×
×
  • Create New...