Jump to content
SAU Community

Recommended Posts

Hi SAU,

I have a 4 gauge wiring kit that needs to run from the battery in the engine bay to the amp in the boot. If anyone has this set up, I'd appreciate if I could drop in and have a look where you ran the cables from the engine bay, and how you mounted the amp in the boot.

I understand most run their wires through a 'hidden' gap near the driver side wheel well, but I'd like to have a look first if it's convenient for anyone. I'm in Newington, so if anyone is nearby (up to say a half hour drive, i suppose?) and has this wiring done on an R34 GTT, I'd love to hear from you

Cheers!

Mick

unfortunately the R34 has the battery on the driver's side instead of the passenger side, so that means you will need to run your power cable along with the rear harness (which isn't ideal).

Run from the battery, into the quarter panel along the harness over the wheel arch then into the cabin through that thick grommet...

Follow that through and line up against the harness running to the rear, cable tying along the way so it's all neat.

Mount amp either on that hump OR on the back seat

Fuse as close as possible to the battery

Earth to anywhere in the boot with a decent sized bolt

easy

  • Like 1

Yeah, i have done mine. As above, through drivers side wheel arch was all power cables.. All speaker wires went down passenger side. I have 2 12" subs in boot with amp mounted behind them.

Loads of cable tying and youll be alright. I'm in Penrith area however have the car apart at the moment so cant drive out to see you. If you wanted to come out and take a look let me know.

Edited by Exodus01

Hey Kyle, I actually came to look at your R33 towards the end of last year, came with my mate and his white S15 - thanks heaps for the offer!

Did you end up taking the wheel and splash guards off to get the wires through?

Ah sweet man, nah didnt have to pull guards off. Theres a grommet you should be able to get to. I've just left my second job so im free weekends now if you need to come out.

Maybe i could come help you when your ready to do it. Either way man

Got a friend named Ryley

HyperSound

U2 1 Roslyn St Liverpool

98222332

www.facebook.com/hypersoundcaraudio

...can mention my name

Not sure if he'll come to you - or that you're close enough to him.

Got a friend named Ryley

HyperSound

U2 1 Roslyn St Liverpool

98222332

www.facebook.com/hypersoundcaraudio

...can mention my name

Not sure if he'll come to you - or that you're close enough to him.

Mick, have you posted in or checked out the Car Audio and Security section??? Link: http://www.skylinesaustralia.com/forums/forum/9-car-audio-security/

Thank you very much for the input, guys - much appreciated! Kyle has kindly offered to help me get through the firewall, and he's only a 20 minute drive down the M4. I did ask a question earlier in the audio thread and got the answers i'm looking for (plus i'm a stringent researcher/googler - I ask all of my stupid questions on the forums) I'm confident with all of the other wiring for the subs. It's not an urgent job either, happy to wait. Cheers!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...