Jump to content
SAU Community

Recommended Posts

Hey Guys,

I have had my Stagea for about a year now.

I live at Lewiston and travel to Regency Park every day for work, traveling about 480KMs a week.

I am about to hit the 150K mark on the stag, Most of the cars i have every had have had under 150K as i usually sold them by that mark.

The problem is, i really like the stagea, and happy with mine, even thinking about getting new wheels.

The question i have is, how many KMs on a stagea is too much, how may KMs most people have, and the amount of problems that come up when they start clocking up the KMs.

I have coilovers, and all new sway bars, sway bar links and rubbers.

Most of the motor is stock, just a pod, intercooler and shift kit

Any advice and insight would be great.

Thanks

Kris

Link to comment
https://www.sau.com.au/forums/topic/443376-kms-how-many-is-too-many/
Share on other sites

If you've spent some money on maintaining it, and you love it, why not just drive it until it dies? Keep up the fluid/brake pad/rotor/shock absorber changes over time and it'll serve you well for years. If the engine dies it's not like RBs aren't thick on the ground, and autos can be rebuilt and strengthened. Really I see no reason not to hold onto a car until its chassis is consumed by tin worm.

We've followed this policy with our VS Commodore, and now it's worth practically nothing but only costs us maybe $2-300 per year in maintenance for another year or so of bogantastic motoring. There's no way you're going to treat your Stag as badly as we treat the Commie so expect at least 300,000km out of it.

TL;DR: A lot more than 150,000km if you maintain it.

If you like you could get your odometer set to 200,000ks now so you can see your car won't explode because of a number on the dash :)

its not that, i just know of certain cars that as soon as ya rack up the KMs shit fails.

I don't plan on keeping it till its done 300ks, but as soon as the KMs get up there i am also worried about re sale value, from looking at the net the c34 has dropped in value a lot in the last year

If you like to change cars every few years for something newer, theres no way around the fact that you will pay for that luxury, with taxes and inspections, rego changing and depreciation. I figure its most economical to buy a good 2nd hand vehicle, maintain and run it until it dies.

Of course you can never be 100% sure whether you will get a vehicle that will have many problems in its life. Even though the stagea is quite heavy on fuel, the old technology seems to be simple and rugged.

If youve done major work on the engine or suspesion, like the 100k service, then you might as well get your money's worth out of the components.

Its not going to all of a sudden fall apart. but obviously components do wear out, so you replace them.

Resale value is going to depreciate no matter what car you have, so kind of a non concern really.

If you want a car that wont devalue, buy one for $1000 and get your money back in 5 years =)

Bushes get worn, distorted and loose. The suspension arms aren't difficult to fix, but something like the rear subframe bushes are much more difficult. If you haven't installed polyurethane subframe collars, that would be a good idea. The reduced movement of the subframe should help extend the life of the factory bushes. However, if you need to replace completely torn ones, you have to take the subframe out.

My Stagea just had its 240,000km service (every 5k oil and filter).

Only things that's let me down is the rad started to leak from the tanks.

I've done timing set and seals as a precaution, and water pump.

Other than that it's the tightest and smoothest running car I've ever owned. No rattles or squeaks.

Agree with everyone on here, k's don't mean anything. its all how the cars been looked after. My Stagea is nearing 230k and has (while in australia) been really well taken care of and you can tell. Seriously they are cheap cars for what they are, well worth fixing and keeping longer than 2-3 years.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's not a transistor --- it's marked ZD1 which makes it a zener diode. As to what the breakdown voltage is, not enough there to divine.
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
×
×
  • Create New...