Jump to content
SAU Community

Recommended Posts

Bob you'll need to specify the model.

There's pre 91, post 91 and N1.

Ok....... I need both pre and post 91's for my ADM and V-Spec2.... N1 not so important.

I know the High beams are the same H3's and the Low beams are H3c and H1 respectively but I want to know the wattage.

Thanks,

Bob.

The 85W bulbs are std....... I had it checked out with Nissan yesterday.

I bought some "you-beaut" Phillips globes as the cars going back to Unigroup on Monday and I figured they can throw them in for me but..............

In the box of goodies I got from the previous owner there is a pair of H11 globes and a pair of HB3's..........

I'm hoping that it's just a coincidence (and error) that he gave them to me as I can't see anywhere our cars taking these globes.

A post "91 car should be H1's and H3's and these are for my V-Spec 2.

This is what I bought, I couldn't get The H1's in 85W bar Nissan and I wasn't going to pay $77.00 for a pair!

I could get 100W but it's risky putting more load on the wiring.

I got these 55W but with extra 60% coverage according to the box! How often do I use high beam....... Not often.

Hopefully they all fit.

Bob.

post-78207-0-25292700-1401522558_thumb.jpg

post-78207-0-74985700-1401522563_thumb.jpg

Bob did Nissan check the factory fitment in Japan or the upgrade as fitted to the Aus model?

The Aus model had 85W fitted as part of the changes to suit our "challenging" driving conditions.

I've only seen 55W in my 32's, even the N1 has moderate wattage of 60/55W in their H4 bulbs.

Bob did Nissan check the factory fitment in Japan or the upgrade as fitted to the Aus model?

The Aus model had 85W fitted as part of the changes to suit our "challenging" driving conditions.

I've only seen 55W in my 32's, even the N1 has moderate wattage of 60/55W in their H4 bulbs.

Hmmm...... Good point....... My parts guy knows I have 2 cars but may well of quoted based on the ADM.

Maybe the later cars got this upgrade too?

I'll know more tomorrow after they hopefully fit what I will give them.

I'll let you know.

Bob.

I probably should have just looked in the owners manual instead of digging bulbs out of suspect headlight assemblies !!!

Well...... That's our answer well done........ I think. What does the 2 and 4 mean on the top two lines?

Thanks,

Bob.

My handbook is for all model Skylines and I think sedans had a combination headlight which used the H4, thus only 2-headlights.

My car has individual low beam lights and high beam lights, thus 4-headlights.

I can't read Jap, so I'm just guessing.

The next light below (with the H3 12v/55W) would be for the fog light.

But Bob your question is doing my head in.

Handbook says H1 on high beam.

To my knowledge R32 projectors use either a H1 or a H3C on low, but they all use a H3 on high??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds good.  I don't 100% understand what your getting at here. When you say, "I keep seeing YouTube videos where people have new paint and primer land on the old clearcoat that isn't even dulled down" do you mean this - there is a panel with factory paint, without any prep work, they paint the entire panel with primer, then colour then clear?  If that's what you mean, sure it will "stick" for a year, 2 years, maybe 3 years? Who knows. But at some stage it will flake off and when it does it's going to come off in huge chunks and look horrific.  Of course read your technical data sheet for your paint, but generally speaking, you can apply primer to a scuffed/prepped clear coat. Generally speaking, I wouldn't do this. I would scuff/prep the clear and then lay colour then clear. Adding the primer to these steps just adds cost and time. It will stick to the clear coat provided it has been appropriately scuffed/prepped first.  When you say, "but the new paint is landing on the old clearcoat" I am imagining someone not masking up the car and just letting overspray go wherever it wants. Surely this isn't what you mean?  So I'll assume the following scenario - there is a small scratch. The person manages to somehow fill the scratch and now has a perfectly flat surface. They then spray colour and clear over this small masked off section of the car. Is this what you mean? If this is the case, yes the new paint will eventually flake off in X number of years time.  The easy solution is to scuff/prep all of the paint that hasn't been masked off in the repair area then lay the paint.  So you want to prep the surface, lay primer, then lay filler, then lay primer, then colour, then clear?  Life seems so much simpler if you prep, fill, primer, colour then clear.  There are very few reasons to go to bare metal. Chasing rust is a good example of why you'd go to bare metal.  A simple dent, there is no way in hell I'm going to bare metal for that repair. I've got enough on my plate without creating extra work for myself lol. 
    • Hi, Got the membership renewal email but haven't acted yet.  I need to change my address first. So if somebody can email me so I can change it that would be good.    
    • Bit of a similar question, apprently with epoxy primer you can just sand the panel to 240 grit then apply it and put body filler on top. So does that basically mean you almost never have to go to bare metal for simple dents?
    • Good to hear. Hopefully you're happy enough not to notice when driving and just enjoy yourself.
    • I mean, most of us just love cars. Doesnt necessarily have to be a skyline.
×
×
  • Create New...