Jump to content
SAU Community

Recommended Posts

Yep, plus the speeds are different.

Naturally these are sprint day speeds NOT happy laps speeds.

I normally enter the main straight at 100kmh and enter turn 1 at 140, the exit of turn 2/start of the back straight is also at 140-145kmh, the entry into turn 3 is about 80kmh and during a race you're breaking as late as possible. As you can see you have the potential to be going a lot faster at the end of the back straight than the front and the corner at the back is much tighter and slower.

I am keen to test that out one day Mike

I'm surprised you still have standard brakes on the SS

The speed you are carrying on the main and back straights + breaking late on that national circuit must ruin them

I am keen to test that out one day Mike

I'm surprised you still have standard brakes on the SS

The speed you are carrying on the main and back straights + breaking late on that national circuit must ruin them

QR don't run sprints on the National circuit, only their general practice. When I was out last I got good laps but on my 4th I has some serious brake fade at the end of the back straight.

Brakes are mostly standard, BDA4000 slotted rotors and EBA Redstuffs and braided lines with RPF600 fluid.

QR don't run sprints on the National circuit, only their general practice. When I was out last I got good laps but on my 4th I has some serious brake fade at the end of the back straight.

Brakes are mostly standard, BDA4000 slotted rotors and EBA Redstuffs and braided lines with RPF600 fluid.

so just need caliper upgrade

Steal Gregos Endless kit :P

Okay, so, I may have overreacted to my coolant system failure last weekend...

Genuine hoses and ebay radiator.

IMG_20140726_111622_zpsghtuvrak.jpg

20588e87-bf66-4a12-a2dd-e28d0438731d_zps

probably the only part under the bonnet you can get too anyway,lol,that should fix it anyway.

Speaking of brakes - I know this is probably the wrong place to ask, but the right place for the people I'd respect the answer from most - what should I put on a V36 350GT? I have a very bad habit of warping or hotspotting discs in all my previous cars, and want to nip this in the budd before I start doing any damage.

Speaking of brakes - I know this is probably the wrong place to ask, but the right place for the people I'd respect the answer from most - what should I put on a V36 350GT? I have a very bad habit of warping or hotspotting discs in all my previous cars, and want to nip this in the budd before I start doing any damage.

was it you in that silver 350gt at last Happy Laps?

was it you in that silver 350gt at last Happy Laps?

Not me, and I sure as hell hope it wasn't my car! Mine is Blade Silver...

I only just got it this week. So unless the dealer was giving it a thrashing I doubt it was mine! :P

Got any footage or pics, I could probably ID it if it was mine...

Edited by Simink

15 mins into mike's commentary lols

Next time less engine noise and louder commentary mouse! :P

What was so funny? My saying the Evo had fulleh hektic stretch?

Buy me an external mic then.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I used to have Walbro 255's when they were a pretty common update. (or were they 044? 040?) In any case I had a dirty tank. I thought the tank was good, but I would find the filter would clog in maybe ~50km of driving. If the issue persists, well, your fuel system or tank has crap in it that the pump is sucking up.
    • Hi. Ok thanks for the info. I/we do not know what tune is on that Nistune ECU so it is why there is stock ECU and that Nistune is for later when the car is done. I have guy who tunes Nistune and other ECU so i will then take it to him to see and properly tune for the car   And for the update. On 99,9% it is bad fuel pump. Which is wierd cuz it is like 2 years old(brand new walbro 255) and that filter (also brand new) was dirty.  I was alwaya pumped premium(100) on very good petrol station so i dont know how is that possible...  
    • Dear folks My family members have 4 different cars : Triton 2015 and Corolla 2011 and Mazda3 2012 and Hyundai Elantra 2014 Looking to buy engine oil funnel spill free What I found are are below  https://www.amazon.com/gp/aw/d/B0BBTTJNKX?ref=ppx_pt2_mob_b_prod_image&th=1 https://www.ebay.com.au/itm/145553221359?srsltid=AfmBOoqYBU6Ptw0LU_bAp_k67U3qkF97HHvePkA7iHZw8vUmiwoIRaRr https://www.amazon.com/gp/product/B09X23TCS5?th=1 Is there a funnel with attachment that fits most cars ? Don't mind to spend for a decent quality  Thx  
    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
×
×
  • Create New...