Jump to content
SAU Community

Recommended Posts

Hi Guys and Gals,

JP here, thought I'd introduce myself.

As the title shows I've just bought a 3.5l ARX. Fresh import from Japan with 93,000km in silver with black leather interior and all the electro gizmos (including indicators on the mirrors). Having come from a 2005 Legacy GT I'm very happy with how this car runs and the trim level.

So far its had:

- Engine oil (15w40), air and oil filters done

- New brake pads all round with new rear rotors and machined fronts

- Interior lights changed to LEDs

- Reverse lights changed to LEDs

- MAF and throttle body cleaned

- New Enasave tires on factory wheels (not my preferred choice)

My to-do list is:

- Diff/transfer case oil changes

- Transcooler and Transgo shift kit with fluid change

- "Z-tube" and plenum spacer, just cos I can

- Upgrade the Bose stereo to a 2din head unit/screen

- Change the oil to 5w30 or 0w30

- Spark plugs

Currently I have a minor issue. The engine sounds like its revving very high, like a whining or supercharger sound that increases with speed from 40kph (even though the tach is saying its under 2000 rpm). I'm thinking either the brakes are sticking (they haven't bedded in yet), the wheel bearing are shot, or possibly the tires are just loud.

Is there any way to confirm this before taking it into a garage? Its loud, and coming from a car with a full 3" exhaust it is very noticeable.

Anyway, I'll post some pics up shortly. Thanks in advance for any advice or ideas on the above issue.

JP

Edited by polyarkos
Link to comment
https://www.sau.com.au/forums/topic/444744-just-picked-up-an-arx/
Share on other sites

If the whining noise is noticeable while cornering, then it's the wheel bearings. It's rare to have both sides go at the same time.

Its loud and noticeable even when driving in a straight line, I'll check if it gets worse when cornering tomorrow.

Thanks

Sounds a lot more like noisy tyres to me, are they just cheapy compliance tyres?

A noisy wheel bearing will also tend to manifest under braking as well.

Good luck with it, welcome to the forum.

Sounds a lot more like noisy tyres to me, are they just cheapy compliance tyres?

A noisy wheel bearing will also tend to manifest under braking as well.

Good luck with it, welcome to the forum.

Its noticeable from 40kpm upwards whether I'm accelerating, cruising or braking.

I'm not sure about the tires, they are Dunlop RV503 Enasave. They were on the vehicle when it arrived of the boat, basically new with a lot of tread - supposedly an fuel saving tire.

Will check tire pressure tomorrow, maybe that will help. As far as I can find the 4wd Infiniti G35 hubs and bearings share the same part number 40202-24U00 so possibly a DIY fix.

Edited by polyarkos

I took the long way to work to see if the noise got worse with aggresive cornering and breaking. Seems to make the same sound the whole time from 40kph upwards, accelerating, cruising or braking.

I'll see if a garage can give some advice.

Checked the tire pressures tonight, all 4 sitting on 28psi. Pumped them up to 40psi and the car seemed less noisy, but not by much. I'll see how it goes over the next week and I might even see some improvement in economy too.

Wheel bearings failing at 93'000km's...... That is not a good sign for the accuracy of the km's the car has travelled.

My 03 ARX had 169'000km on mine when sold and had no problems with wheel bearings.

Wheel bearings failing at 93'000km's...... That is not a good sign for the accuracy of the km's the car has travelled.

My 03 ARX had 169'000km on mine when sold and had no problems with wheel bearings.

Personally I don't think there are many cars coming into NZ with legit KMs. I am yet to find a dealer that will provide the auction sheets if requested.

Having said that the car looks in really good condition and I do expect stuff to wear out (at least I know I'm good for a while when they are replaced).

Hey mate, I have the identical issue with my axis. Over 40ks and it sounds like a airplane bout to take off! Have had tyres rotated, balanced and camber adjusted all to no avail. Also had 3 diffrent mechanics drive it and all conclude its tyres. Havent had coin to change em, so cant confirm or deny it being the fix. But im in the same boat and tyre's would be my outsourced opinion.

Hey mate, I have the identical issue with my axis. Over 40ks and it sounds like a airplane bout to take off! Have had tyres rotated, balanced and camber adjusted all to no avail. Also had 3 diffrent mechanics drive it and all conclude its tyres. Havent had coin to change em, so cant confirm or deny it being the fix. But im in the same boat and tyre's would be my outsourced opinion.

This is exactly whats happened to mine. I got a garage to check the bearings as a road test was not conclusive. Spoke to Dunlop and they say the tyres are supposed to be very quiet....unless they have begun to sepparate.

Put the car on stands, remove the tyres and see if there is play in the bearings are they are noisy or catching when you rotate the axle. This will help to narrow things down.

I have changed many front wheel bearings on these, new and old. They seem to wear out quickly, especially if they were replaced by incompetent mechanics. Bearings need to be pressed in correctly or they will make the same noise as the old bearings and quickly fail.

You can't always feel slop in the bearing as there are two races, unless one race has failed completely.

Can't you just borrow a set of wheels of someone to try?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Had a go at the stuck crush tube this afternoon. Tried things like grips and a chain wrench first but wouldn't just twist straight off. So got to work with a drill. Started small and kept a depth stop on to make sure I didn't drill into the bolt. Made a line of drill holes all the way up and enlarged them. Then a combination of chisel and Dremel to split it all the way up. Levered the split to get oil in there and eventually it gave a bit while levering. Worked it back and forth with loads more oil till it was spinning freely, then with grips I could work it downwards and off. And no significant damage to the bolt (not by me anyway - just the 27 years of rust)
    • Well, I'm tired. I'm tired because about 4PM yesterday, before today's appointment someone immediately bought my bumper. They couldn't get it any other day as they're on the way back to NSW. So I had to do that big GTR conversion I had been planning. Unfortunately, the information on SAU about what you need and how this is done is incomplete. So what should be a simple bolt on affair, yeah, it's not. Did you know if you use all GTR items the bonnet won't close? This little manuever sent me into about 1am the night before trying to dodge a way to get it closed. I will have to revisit this in the next few days  - or maybe not, I may let a body shop figure it out. It all needs to come up and my motivation to pull the bumper off is low. It also seems to hit things in the bay where the GTT bonnet didn't. Yes I used 100% new OEM GTR items. Today, I had the joy of driving to the dyno looking like this: Given I had roughed in the fuel and given sensible but pretty conservative timing, I didn't really bet on having the car drive out any real difference than when it drove in. Sadly due to a miscommunication and laptop fun and games (and almost bricking the dongle, prayers and firmware updates indeed), I ended up using HP Tuner credits to licence the car that was already licenced. So in the end my laptop was used. It turns out my butt dyno is still well calibrated after all this time. The 325kw was on 74% Ethanol, the 313kw line was on 98. The other line is the 'before' line which was 281kw. While the numbers are pretty low, they're pretty in line with what you'd expect. Even if US dynos bump the whole result up about 50KW, gaining 10-15% is similar gains.  The curve of the cam is pretty much spot on with what was discussed as well. All this said, it still feels bad to not see the number you secretly want to see. Even if the car drove great beforehand, and I knew pretty confidently the car would drive out much the same way it drove in due to the nature of a wellish dialled in LS1 not gaining much if anything at all from being tuned from where it was. As expected, the car isn't particularly sensitive to running it at anywhere between 12.0 and 13.0 - And the initial timing at 20deg and 12.0 made 308KW. So 3 degrees of timing, and leaning it out to 12.7 for 5kw, anything above stopped giving any benefit until E85 (which has an additional 2 deg as before). Car itself behaved entirely fine. I found out that 100C = 1.15V! IAT at about 7pm was 19C. I might mess with the bonnet mounting.. but given the REO NEEDS TO BE CHOPPED TO FIT A GTR BAR this is possibly something I may leave gathering (more) dust until it returns to paint jail.
    • It sounds farrrrrrr too cold at your place Duncan... Here I was thinking our 10 degrees overnight is getting cold...
    • oh yeah, reminded this morning....bin lids frozen shut too
    • In my case not, because of total reno. But yeah.
×
×
  • Create New...