Jump to content
SAU Community

Micro Teacup Chihuahua Puppies** 2.3 Lbs Full Grown **


Recommended Posts

Micro Teacup chihuahua Puppies** 2.3 lbs Full Grown **



Extremely tiny micro teacup females and males available for new homes.
Each will come with a year health guarantee,up to date on their shots,
dewormed,dewclaws removed,a puppy starter kit,blanket,toys and
well socialized.Their mother is Registered and weighs 2.3lbs.Father is registered too,
weighs 2.2lbs,is champion sired with many champions in parents 7 generation pedigree.
If you are interested in owning one of this pups,feel free to contact directly:

[email protected]

post-135347-0-67643800-1404095380_thumb.jpg

Why you no have picture of puppy's?

Are they too small?

Mum and dad are registered with who? The council?

Do the pups drink coke?

Will you post? Express bag should be big enough.

Is a micro teacup like a shot glass but of tea?

I has many questions.

Please spam us with tiny puppy pics.

Edited by Ben C34
  • Like 1

Also this is obviously a scam.

Unfortunately this forum isn't full of teenage girls so your chances of an actual bite are low. Even lower than the bite you would get from the fictional puppies

Edited by Ben C34
  • Like 1

Also this is obviously a scam.

Unfortunately this forum isn't full of teenage girls so your chances of an actual bite are low. Even lower than the bite you would get from the fictional puppies

But you have no idea how badly I want a "Micro Teacup chihuahua Puppies"! It will suit my 33 so well.

  • Like 1

But you have no idea how badly I want a "Micro Teacup chihuahua Puppies"! It will suit my 33 so well.

Does it come in pink? If so... It's needed... For you... I would rather a mini teacup leopard...

Also, spaces are good after punctuation. Mmmmk!

SCAM???? no way, the number of posts made by the OP is enough to reassure me..

So, how much meat do you get offa these lil critters? .....just asking, nothing suss....

SCAM???? no way, the number of posts made by the OP is enough to reassure me..

So, how much meat do you get offa these lil critters? .....just asking, nothing suss....

According to a totally reliable webpage you get 53-58% of live weight as dressed meat from Veal. A Micro Teacup chihuahua Puppy is probably similar so I would say about 1.2-1.45 lb or 544-657 g.



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...