Jump to content
SAU Community

Recommended Posts

Origiunal Quote from BlackRobin:

(I was looking through import lists for over 7 weeks and probably viewed 60+ R32 GTR's... 5-6 looked really nice)  

I think most GTR's I looked at over the 7 weeks were stock (alot looked shit and run down) some have got way to many mods and roll cages etc... those looked like they would have been thrashed and subjected regular race use (not for me)  

One thing I did notice on 95% of imports in Japan, they all have those stupid cup holders (sorry if anyone has some) I know the first mod I will be doing is getting rid of them from my dash (very RICE)

Origina Quote from Funkymonkey:

mate... take this as a very important word of advice... UNDER NO CIIRCUMSTANCE should you try to remove those cup holders from the centre and passenger side ventilation vents.... why? Because japanese cup holders and R32 vents is a one way thing, once on, never removed. R32 vents have this predisposition to crumbling to dust once you remove em. Trust me, I've seen plenty of R32s go thru J-Spec and most of the ones with cupholders come back in a week and ask for centre vents (mine included)

Hi,

Cup Holders... RICE... I think so. More so the ones that say Type-R (Type-R cup holders..thats an extra 10kw right?)

I have brought these quotes from another thread in the Vic Pages. My forum etiquette is novice, is it OK to to do this?

And, not that I don't beleive Funkymonkey... but there must be a way to get rid of them... they even say HOT/COLD cup holders? I really would like to get rid of them once ar arrives.

  • Replies 77
  • Created
  • Last Reply

Top Posters In This Topic

well esp with cars as old as the R32, the grill is made of brittle plastic, and if you exert even a little force on it you'll snap the whole thing off. For some reasons the 32's I think coz of the material its made of and the sunlight acting on it etc etc, the centre vents are easily snapped, and because of that the prices for that part on average is more than usual in japan.

Stickers add to the performance of the car? How? Stickers are usually very slippery, thus when the air passes the sticker it has less resistance than the surface of the panel.

So in short, stickers reduce the aerodynamic co-efficent of the car.

Example. Look at F1 cars. The cars with most sponsorship stickers are the faster cars. Best example the Ferrari's (also red is faster but that's another essay).

Cars like the Jordan and Minardi are slow because they lack stickers. :uh-huh:

 :bahaha:

It may, and I may also be wrong, but if the car is polished and waxed well enough, it'd give the same effect as several stickers. Plus, it also depends on the 'thickness' of the sticker, and how much this edge faces the airflow.

Anyway, even if you have the parts, there should be a part - sticker balance. Having a HKS intercooler, and then 101 HKS stickers ain't the way to go. Nothing wrong with a few small stickers though; but you still need the parts.

Goon, that's what aftermarket bodykit's are for.

GT-R kit on GTST = rice.

Kind of like those dudes back in the early 80s that would buy a VW beetle and buy a porsche full body kit. :)

But the question on everyones minds is.. is that considered early 80s rice?

i'll throw in my opinion for what it's worth. If you have a Nismo, HKS etc... sticker on your car and you have nothing of those brands on your car it's RICE. RICE is lying about what is on/in your car...

i don't think it's RICE if your simply want your car to look cool... my mate, who drives an FTO, couldn't care less about the performance of the car but still is going to get a body kit on his car and will put the RALLIART sticker on his car it's not really rice if it is a RALLI ART body kit.

but ralliart, as is nismo, the performance sector of the car company. you goto nissan.com you see the link to nismo part. you goto mitsubishi aus site, under sports there ralliart vehicles. this is why i say these 2 examples of stickers (or TRD and whatever other there are... STI ) are not rice as they don't imply a part in the same way apexi and greddy stickers do. i see your point though.

I don't think the GTR kit is rice, but if you put the badges on too that's a different story. Yes I do have a GTR rear spoiler on my car, BUT, it serves a purpose, it is capable of making downforce, unlike the standard R33 spoiler which is just there for looks. Does this make the standard 33 spoiler rice? When I bought my car there were Apexi stickers everywhere. I managed to get most of them off but am now left with a hideous sticky residue on 1/2 my dash. However the car did come with Apexi suspension, strut brace, intake, gauges etc.

Does this make the standard 33 spoiler rice?
How can a standard part be rice? (even if it's functional or not?) Are you gonna go into a dealer and say "Y'know dude, I think I'll pass on the Evo 8, coz it's got too much rice from factory..."

This whole rice thing is getting irritating.

my skyline came with some "skyline" stickers on the passenger side of the dash, the ashtray and centre console. that is ricey. they were removed the day i saw my car at the importers.

stickers like that are very unesscessary and unsightly that is why they are ricey, there is no value. i feel the same way about stickers on paintwork of any type be it characters, to stickers of performance brands, whether you have the parts or not on or in the car it is ricey.

why ruin the the body lines of a car by putting stickers on them?? like someone said earlier that is what your tool chest or toolboxes are for.

i am sure i will upset some fellow skyline drivers by my comments but i find it really dissapointing when i see a line with stickers all over it.

my friends tell me my car is "ricey" but they have no idea really, they think as the car is from japan that it is "ricey" this is why i am so vocal on the matter as i try to explain to them the differences between something from japan with a stock bodykit (except my front bar) and an over the top body kit on a car (usually an excel or corolla) with ridiculous wings and sheet metal hanging off it and say that is ricey.

any crap you can buy from supercheap etc. is most likely to have a high "rice" factor. checker plate inside the cabin is ricey too.

paint work is something differentpaint a car whatever colour you want. it has to have paint so it can't be considered ricey to have bright or offensive paintwork.

i have gone on too long here, sorry but i don't understand why you would want stickers on your car.

i saw a 1988 ford with printed out performance stickers glued to the side of the car, and also had some word printed out on paper and glued to the car window. It also had two NOS stickers on the back of the car....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...