Jump to content
SAU Community

Recommended Posts

Guys i need some feedback from professionals such as yourselves.

My R32 GTS4 is running a HKS 2530.

Bigger injectors and fuel pump.

Apexi front mount.

I've got a super strong clutch.

Old style Apexi AVCR.

Only running 10psi.

The other day i was driving like normal, seriously, and the tachometre needle just jumped over 8 thousand revs as if i had clutched in, but i haden't. I pulled over and checked what i could but there was nothing visibly wrong. i started the car again and it drove fine. it's as if the engine is boosting like a million pounds without fuel. I checked the wastegate actuator line, no problem and all hoses are fine, clutch engages all gears fine, no diff noise, no gearbox noise, just this scary overboosting (imo).

If anyone knows what i mean please help a brother out!

Peace.

Link to comment
https://www.sau.com.au/forums/topic/44511-big-problem/
Share on other sites

thanks guys. yes the car does move while the problem is occuring but feels VERY slow, as if there is NO boost at all. as for clutch slippage there has been no such action, fresh clutch very strong. I was thinking about the boost controller solenoid but i don't know how to fix one if possible. thanks again for your valuable input.

Link to comment
https://www.sau.com.au/forums/topic/44511-big-problem/#findComment-909985
Share on other sites

sounds like a slipping clutch to me. how long ago did you change it? with a stock one or aftermarket one?

if it were the boost solenoid going then that doesn't explain why it revved to 8000rpm suddenly it would only explain the loss of power.

maybe a problem with the diff? sounds something drivetrain-related as if the engine lost load and just revved freely...

let us know how you go,

Waz.

Link to comment
https://www.sau.com.au/forums/topic/44511-big-problem/#findComment-911236
Share on other sites

thank you ed and waz. these things sound scary to a novice like me and i'm not so sure i know how to acurately check these things. the clutch is probably a year old and feels really grippy and always did before the problem started, it's a heavy duty item. the problem happens all the time now. any ideas how to check gearbox and diff?

Link to comment
https://www.sau.com.au/forums/topic/44511-big-problem/#findComment-911312
Share on other sites

Does it happen when you accelerate? or just after you change gears? turn corners? etc etc

Does it happen when you are doing a certain speed or rev??

Or does it just happen any time on a straight bit of road at normal speed [and you may have been sitting on the same speed for a while?

Link to comment
https://www.sau.com.au/forums/topic/44511-big-problem/#findComment-911371
Share on other sites

ooh so many questions. okay, car starts, clutch fine into gear, accelerate fine up to 1500rpm and then it's as if i've clutched in and the pressure of my foot on the gas pedal sends the revs flying. happens through corners and start stop etc. kind of goes away after a good warm up, say 15 mins. after this happened a few times i didn't want to damage the car further so i haven't taken it anywhere yet.

Thanks trident.

Link to comment
https://www.sau.com.au/forums/topic/44511-big-problem/#findComment-911424
Share on other sites

When the engine revs increase, are you braking out into wild wheelspin? It is physically impossible for your revs to increase so dramatically without your roadspeed inceassing also.

So you are either braking into pretty wild wheelspin (i think you would have noticed that by now :) ) or you have a drivetrain problem, im assuming your clutch. :Oops:

You say it happens in 1st gear, does it happen in say 3rd gear going up a hill?

Link to comment
https://www.sau.com.au/forums/topic/44511-big-problem/#findComment-911778
Share on other sites

thanks roy. yeah no wheelspin, and it does happen in any gear. as for my clutch it was working fine for a year and then one night while in 5th gear on a freeway it just revved up. the clutch engages all gears easily so if anyone could tell me how to check my clutch i would greatly appreciate it.

Link to comment
https://www.sau.com.au/forums/topic/44511-big-problem/#findComment-911878
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...