Jump to content
SAU Community

Recommended Posts

Well, apparently R33 stuff fits straight in. IT DOESN'T. The springs in the rear are wider on the R33, so won't fit back over the stock struts and under the strut cap. I'm unsure whether you can change to the R33 struts as well, which of course would fix this problem, but the rear springs from an R33 are not the same as those in the C34 Stagea. Fronts are not a problem though :thumbsup:

 

Gary bought Kings Springs, straight from Kings I believe.

Sounds like R34 springs, they are smaller diameter coils than R33. I am not going to change the springs on ours, unless I find them too soft. I will simply lower it with the circlip height on the Konis. The question now is R33 or R34 shocks? :confused:

  • Replies 99
  • Created
  • Last Reply

Top Posters In This Topic

Stagea insured for $20K with NRMA was $2.4K, for me.  I have 4 cars insured with them, all on 65% NCB, house and contents policies, 4 geenslip policies etc.  Guess who is not going to get my Stagea insurance? :wassup:  

Thanks for the tips guys, I emailed off a quote request to Shannons yesterday.  Just Cars will get a call today.    :thumbsup:

Have you suggested to them that you will be taking all your insurance to whoever insures the Stagea for the most reasonable cost?? :D

Stagea insured for $20K with NRMA was $2.4K, for me.  I have 4 cars insured with them, all on 65% NCB, house and contents policies, 4 geenslip policies etc.  Guess who is not going to get my Stagea insurance? :wassup:  

Thanks for the tips guys, I emailed off a quote request to Shannons yesterday.  Just Cars will get a call today.    :thumbsup:

2.4k @ $20k is horrid..i was quoted $2400 @ 50k for 260rs at famous 60% no one under 30driver .sat track alarm ...i thought this was two much ...but the good old NRMA can make anything look a bargain

My Stagea is currently on a ship from Japan.

I can't wait as I've been in little N/A silvia for way too long.

I already have 18" white Nismio rims to put on it + BOV and Striaght pipe exhaust. Does anyone knoe if R-34 Nismo suspension will fit?

Have been told many conflicting stories about this.

Mine is getting a AUtech Kit from AJM motorsport and is getting resprayed black. Also is leather with twin sunroofs.

And big sound system soon to follow. :wassup:

for the suspension, front is exactly the same as 33 gtst but the rears are a different story.  I sourced my new suspension of an Autech RS 260.... get it back tomorrow will let you know how it handles..

Cheers

Gary

Hi Gary, what is the rear like, R32 GTR I heard was pretty close? Did you keep your standard shocks?

GTR is all different the hub is different therefore the bottom of the shock is different. You can change hub carriers and then it should fit. The easiest way is to modify the top hat of the shock.. I had Kings springs make the rear springs but the front are just lowered, heavy duty 33 gtst off the shelf items. Standard shocks are gone, replaced with Autech

Cheers

Gary

P.S Don't try the manual conversion yourself.......What a nightmare!!!

Hey all,

I have recently purchased a RS4 due to baby one the way. Sold my heavily modded 32 gts4 but am very happy with the new toy. Have got Tein S springs to drop her a little, gtr fmic, exhaust, boost guage timer etc etc. Might have a go at the group buy for the stainless mainfold too. Tein springs are ex Japan only (correct type for 4wd staj's), if any one is interested I can organise some more, $350 inc gst + ship. Will post photos when car is done. Nailed a VY SS commode off the line up to 100kph, mate did he have the shits. hahahahah.

Cheers,

Ken

Wife got a 33 turbo 4 door. (no point is going backwards is there)

Had my stagea since Feb

Bought it fully complied, I was wondering about the NEO version, but went

for the 1997 RS4. Looks great, dual sunroofs/blue.

Just cars gave me a $990 per annum deal, but I have got

a good record (rating, no accident claims for years and years etc, and over 40)

My insurance is through Shannons. I pay $550 per year full comp. Insured for $22k. I think i got a good deal due to my last car r32 gtst4 and my gtr race car was insured with them. Got my wifes 33 turbo 4 door insured for $530 per year. Give them a call.

Ken

Hey Gary,

You wouldn't happen to know anyone else who has any autech suspension and what price i'd be looking at?

How much did king springs charge you for that setup. How much did it lower the car?

I wish the manual conversion was easier! That will be the only thing i'll miss about my lil' silvia...

Can't wait til mine is done!!! Arrives on the 30th but straight to compliance GRRRR. And then the transformation begins from family wagon to V8 EATER.

My insurance is through Shannons. I pay $550 per year full comp. Insured for $22k. I think i got a good deal due to my last car r32 gtst4 and my gtr race car was insured with them. Got my wifes 33 turbo 4 door insured for $530 per year. Give them a call.

Ken

Shoot that must be a "Darwin" price, "Sydney" price is double that. I will give them a call back and ask whether that's the case.

Shoot that must be a "Darwin" price, "Sydney" price is double that.  I will give them a call back and ask whether that's the case.

Yep, it was a "Darwin" price, less accidents and lots less chance of getting it stolen, so cheaper insurance. So far Shannons wins at $1.2K with $400 excess, Just Car second at $1.3K with $1.2K excess, NRMA last at $2.4K. :P

Yep, it was a "Darwin" price, less accidents and lots less chance of getting it stolen, so cheaper insurance.  So far Shannons wins at $1.2K with $400 excess, Just Car second at $1.3K with $1.2K excess, NRMA last at $2.4K. :)

97 260RS @ $50;000 insured w Just Car $2887 60% nc no driver under 30, sydney

  • 2 weeks later...
Yep, it was a "Darwin" price, less accidents and lots less chance of getting it stolen, so cheaper insurance.  So far Shannons wins at $1.2K with $400 excess, Just Car second at $1.3K with $1.2K excess, NRMA last at $2.4K. :D

"Darwin price" - hahahahahha.

Got to be kidding. Open speed limit, no local approved panel beating wshops for imports. Guys, cars cost a heap to insure up here. The major problem is getting a company to insure the imports in the first place. I have got a good deal through previous business done with Shannons, thats it.

Masa kit Primo? Looks like a winner.

Ken

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...