Jump to content
SAU Community

Lowering The Back Of My R34 10Mm

Chris32
 Share

Recommended Posts

Chris32 Veteran

Chris32

Posted
Posted

My R34 sits at 340mm front and 350/355mm at the back on Nismo S-Tune springs/shocks - no form of height adjustment in terms of adjustable circlips etc.

Ideally I'd like to drop the back 10/15mm as it bugs me how the back sits up a fraction, all the lines and styling on the 34 Sedan angle towards the front which highlights the back being just that bit higher.

Having had 4 different sets of adjustable suspension in my old 32, I can't think of anything to do other than replacing the rear springs.

The nismo shocks look to have a pretty standard spring seat so different springs should fit.

Anyone have any idea's how to achieve such a small drop easily? I can't think of anything other than replacing the springs?

Link to comment
https://www.sau.com.au/forums/topic/445373-lowering-the-back-of-my-r34-10mm/
Share on other sites
Chris32 Veteran

Chris32

Posted
  • Author
Posted

Heat the springs up?

Yeah I thought about taking it to a spring/suspension place here and seeing if they can reset the height. For the hassle of taking them out I may as well replace the springs

Sinista32 Grand Master

Sinista32

Posted
Posted (edited)

Go Lovell's

If your happy with the ride then just drop some Lovell's in the back.

In my 34 GTT I liked the ride so just put shorter lovel's all round. The height dropped and only marginally stiffened the ride.

Feels really good :thumbsup:

- I can get you the part number if your keen. just PM me

I'll get a side on pic so you can check it out too

Edit: Mine were done by Capital Steering and Suspension in Canberra (best in town bar none).

Edited by Sinista32
Chris32 Veteran

Chris32

Posted
  • Author
Posted

Found this - http://www.autospeed.com/cms/article.html?&A=112276

and this - http://www.skylinesaustralia.com/forums/topic/36298-reset-springs-absolutely-dont-do-it/

Chris32 Veteran

Chris32

Posted
  • Author
Posted

Put a 10mm spacer into the front. Your handling will thank you for getting it up to a better height anyway.

Mmmm, never really thought of that. Does that sit on top of the strut? I've got plenty of thread on the nut even with the strut brace.

That would transfer a bit more weight to the back as well I'm guessing, which wouldn't hurt

Sinista32 Grand Master

Sinista32

Posted
Posted (edited)

34 GTT stock ride pretty high -> like a 4x4

would going higher than OEM introduce any instabilities or negatives?

let alone around a 4" gap between tyre and guard

Pic of stock height on 18"rims with a 35 profile tyre

Edited by Sinista32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...