Jump to content
SAU Community

Recommended Posts

Never heard of them?

Pricing?

They are from GSL as well... Similar to the A1rm in price i think but 11ty times better!

I was trying to stop my full weight 34 on A1rm and had no chance, burnt 2 sets of pads in 60 laps or so... Swapped to Winmax and have now run 60+ laps without much sign of wear AND they stopped amazing, over and over without fade!

Link to comment
https://www.sau.com.au/forums/topic/445427-trw-vs-qfm-pads/#findComment-7334194
Share on other sites

Cheers, good to know.

Would also like to know who's used the TRW pads, they are much cheaper.

Cheaper... Brakes... Not likely to end well :P

In saying that i am pretty sure i used the TRW fluid and it worked well lol

Call Greg @ GSL and he will give you the answers you need! Pretty easy to deal with!

Link to comment
https://www.sau.com.au/forums/topic/445427-trw-vs-qfm-pads/#findComment-7334200
Share on other sites

Track only.... Winmax.... A1rm are garbage in comparison!

What are the Winmax like from cold? I run A1RM's atm as the car is used on the street occasionally but if the Winmax were better wearing for a similar price I'd switch to them.

What about rotor wear?

Link to comment
https://www.sau.com.au/forums/topic/445427-trw-vs-qfm-pads/#findComment-7334354
Share on other sites

What are the Winmax like from cold? I run A1RM's atm as the car is used on the street occasionally but if the Winmax were better wearing for a similar price I'd switch to them.

What about rotor wear?

Worked from the minute i left the pits... Have not used them on the street as yet!

Rotor wear will be an issue i would imagine as would any aggressive pad... You can get varying compounds depending on your needs!

Link to comment
https://www.sau.com.au/forums/topic/445427-trw-vs-qfm-pads/#findComment-7334415
Share on other sites

Worked from the minute i left the pits... Have not used them on the street as yet!

Rotor wear will be an issue i would imagine as would any aggressive pad... You can get varying compounds depending on your needs!

I noticed that you went for the 6.5 so I'm guessing the 4 or 5 would be better for a bit of street use.

What's the pricing like as I think the qfms were only around $130 or so from memory.

More if you're running bigger calipers like I am.

Link to comment
https://www.sau.com.au/forums/topic/445427-trw-vs-qfm-pads/#findComment-7334420
Share on other sites

TRW Pads...

They have been around and known around Rally and track circles from the early 80's, heat cycle them 3 times and they become a serious track pad.

We know of a few rally privateers still running them today, they refuse to run anything else.

On my sons S2000, he had them and loved them, last pad change i upped him to EBC Red Stuff ceramic, many more $ extra and his says the TRW were better and he wants them back on the next pad change.

Edited by GTRPSI
  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/445427-trw-vs-qfm-pads/#findComment-7334651
Share on other sites

Yep, thats my advert, they are the ones.

Made in Spain by Lucas.

QFM are now made in Asia after talking to their agent a few months ago. (and for a while now but kept quite in the industry), cannot rember if he said Malaysia or Indonisia or other, but it was not china.

Link to comment
https://www.sau.com.au/forums/topic/445427-trw-vs-qfm-pads/#findComment-7335198
Share on other sites

Well you're going to be biased, but what should my expectations be versus the A1RMs on my car?

S13 with S14/15 front calipers and standard rears, R33 Booster.

Slotted rotors, BM50.

Brake duct vents (home made though, piping from front air intakes to hub so who knows how well they work lol)

Link to comment
https://www.sau.com.au/forums/topic/445427-trw-vs-qfm-pads/#findComment-7335208
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...