Jump to content
SAU Community

Recommended Posts

For what you buy an Evo or GTt for they are better value for money than more current exotics . The average person isn't even going to consider the above .

Damned right. and if you know what you are doing mechanically then there is no reason to get caught with an old dud (one of the reasons people stay away- due to the age).

Otherwise with the right mods there is no reason they cant be made to perform and handle in a way that matches up to current high end cars (HSV R8+, Evos STi, M3 etc).

My 1993 R33 GTS-T was plenty good enough in performance and handling (and looks for my tastes) after all of the well calculated mods I did. I loved driving it for over 4 years and if I wanted more I knew that all I needed to do was to put on even better rubber or a better turbo + E85 and she would be at the top again.

I built that for about 25-28k (including the car). ANd being an older car you don't mind pushing them and enjoying them when u would baby or not take out a new and more expensive car...

Edited by jjman

Disco one thing that's a little contradictory there is that the king of the ocean itself, the GTR, is the very car that sparked the hatred in 92.

The GTR is probably the level between hard edged EVO and pudgy old GTT. Though with modifications is on par for speed with the evo in many ways, which would suit many of the ladies looking for the said change.

Anyway, your motives are as clear as mud and this thread puts the imagine of a peacock into my mind. A peacock standing on the roof of a skyline showing its EVO colours.. Just do the poor skyline some justice and sell it to someone who will actually drive it. Once you get the EVO you can go as far as removing the wing if it gets in the way of your shopping, etc.

I say this with love <3

Man you can be a real wet blanket sometimes aye, like a few others on here, and I'm sure I'm not talking to an adolescent. My motive is to maybe try something different (if its worth it and appeals to me) - Evo because same price range and great performance, same same RZ Supra. I don't discriminate when it comes to cars but will always have a sweet spot for skylines, and the R34GT-R is my fave out of all cars, it doesnt offer any bang for buck unfortunately.

And I also say this with love. haha

Disco one thing that's a little contradictory there is that the king of the ocean itself, the GTR, is the very car that sparked the hatred in 92.

The GTR is probably the level between hard edged EVO and pudgy old GTT. Though with modifications is on par for speed with the evo in many ways, which would suit many of the ladies looking for the said change.

Agreed. GTR is a god.

While with stock suspension and wheels/tyres ill agree that the GT (S/T) series in the R33-34 are a bit boaty, they really aren't that fat. They are usually in the vicinity of 400kg lighter than a HSV/FPV or even AMG etc etc...

So iv certainly found that with a good set of coilovers and good rubber it really highlights that they are not a heavy car deserving of the boat title...

I think the hypocrites learned to hate the GTRs because they broke too many inflexible prides . I guess if you can't see past the bigger is better slogan you deserve the therapy bills or chronic alcoholism .

The silly thing is that the Sierras cleaned up the "big bangers" and the GTRs rounded them up in their time . Had the 4WD Sierra Sapphire thing been in the race history may have been different .

GTR is harder to compare to an Evo because it is more comfortable and not quite as hard edged , this is not to say less capable just probably not as sharp . I don't think an Evo would stay with a GTR outright speed wise but I think a standard one might just stand up to hard lapping a bit longer because they have the edge cooling wise . Brakes would last longer because they are lighter cars and I think the AWD is possibly easier on tyres than the GTRs front assist system . Also I think the std front diffs may be a bit fragile in GTRs .

In twisty windies I think an Evo would be more nimble with less weight up front to make change direction .

I'll agree theres a bit more involved doing transmission work on an Evo compared to a GTST/GTt but GTRs are hardly easy , I remember being under a 32 on a hoist and it was a three man effort to R and R the gearbox . I never want to do TT changes on a GTR , huge PITA . Easily worth having the HKS TS manifold and gate and one of Garretts T4 TS BB turbos - or a TS IW EFR .

A .

  • Like 1

Otherwise with the right mods there is no reason they cant be made to perform and handle in a way that matches up to current high end cars (HSV R8+, Evos STi, M3 etc).

These current cars are no match for well modded skyline, GTR or evo in versatility, performance and function with hardly any investment in comparison. Most families have 2 cars anyway. And then the driving experience is so raw, no comparison with the current crop that's for sure.
  • Like 1

I've driven an Evo 9 stock, with coilovers, various mods, up to 265awkw. I can tell you that kw for kw they drive virtually identical in a straight line. The twin scroll 4G63 makes up for the 500cc less capacity and ends up feeling slightly more responsive than an equivalent RB25 due to the shorter gearing.

The cornering is obviously different with the biggest difference being the much faster steering rack making the Evo dart into corners much better, then mid-corner you can obviously lean on it harder due to the active 4WD system.

In saying that I personally think although the Evo is more competent you get just as much enjoyment from a R-chassis since you can adjust the attitude with the loud pedal to provide a bit of tail out fun.

I would agree that an Evo needs at LEAST an FP green and 250awkw before they are truly exciting. Otherwise they are just fast and clinical. I would also suggest at least a rear sway bar.

I was a big fan of a mates Evo 9 with 265awkw, coilovers and rear bar. and I'm a negative and critical little f**ker.

  • Like 1

You do both bars in an Evo , front involves a bit more work but worth it . Std optional Bilsteins and stock springs aren't too bad . Flash the ACD computer with Ralliart settings and it gets pretty tight . People I know got almost 250 with a factory 7 turbo fitted with one of GT Pumps larger turbine housings and a better IC hot pipe - on E70 . FIC squirters

and flash tuned std computer .

Mivec 9 engines get better cams plus inlet VCT to go with the bigger diffuser and compressor housing . I'm told that with the right mechanical diff centres back and front they make shit to a blanket look loose .

Really neither 9 or GTR is cheap to own and work on , I agree late Evos are later cars and development went on longer with them than GTRs . 1992 was pretty much game over for GTR in competition on an international scale where 99-2000 was about it for competition spec Evos . I think 9s went up to around 2006 where GTR was finished in about dunno 2002-3 ? Somehow Ralliart and Mitsubishi funded development programmes for Evos after Nissan gave up serious development on GTRs and was more interested in survival than anything else .

A .

Well I've just run a few insurance quotes, for my R34 Just Car would insure it for $13,900 with a premium of $1200 ($1725 excess)

Just did the same figures for a 2003 Evo, agreed value is $24,500 and premium is $2300 with $1725 excess.

This is for under 25 male driver.

That's a nasty little extra cost that i didn't foresee! At least if something happens, you get some money back.. unlike what happened with my R34 that Glasses values at $14k.. yeah right. Some of this valuation is ridiculous.

I went through last year with 355 & 345. Very carefully measured, legal pretty much to the millimetre.

Lol goes to show you how inconsistent Regency is...

I tried to go through at 356mm on the front and they turned it down for being 3mm too low.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...