Jump to content
SAU Community

Recommended Posts

Hi all,

I have been trying to get some information clarified. In NSW, legally how is a car dealer meant to advertise a Demo car that has been registered. Is the advertised year determined by Build date or Compliance date?

For example, a car has build date of 2013, compliance date of 2014 and is a MY14. It is a demo car that has had registration for three months. What year are they legally meant to advertise it as? Again it's a Demo, so I guess that would qualify it as a used car? If so I'm sure that should change things?

I know it's a bit of a grey area especially when it comes to a brand new car, It is also different in each state.

In S.A it doesn't matter if it's a brand spanking new car, a demo or a fully used car, it has to be advertised by the build date.

Again just after information for N.S.W. I would Appreciate any help.

Cheers,

Paul

At a Volvo Dealership Paul, this 3l turbo straight six...

Terry-3_zps4e1b5e7e.jpg

had been driven by a director over the past year for 11,000Km.

Build Date = 2011

Model = 2012

Complied = 2013

Bought as a 1st Owner = 2014

Upon transfer of registration (with new car 4 yr manufacturer's wty), it reads as a 2013 car.

Personally, we though it'd be 2012.

Anyway-y-y-y-y...

It's goes off tbe compliance date

yup, compliance date.

warranty goes by first date of registration.

Ok... They sure have it both ways then. I bet when it comes to resale it will be based on Build date :(

Like I said in S.A , no matter what, the car has to be sold by the build date. I must say its a bit disappointing, from what I have found out it is a bit of a grey area. I also would have thought the rule/law would change when it has been registered? I would expect that from a dubious used car sales place etc. but not from a premium dealer especially when forking out a bit of coin. Would be nice if they said it's really a 2013, another lesson learnt I guess, don't trust anyone :(

I also thought it would change things when it's been registered all ready,

When reselling, you would also advertise by the compliance date.

The reason we go off compliance, is due to some manufacturers taking literally 1-2 years to get compliance after the car had been built.

Who would want to buy a 2yr old new car?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ..this is the current state of that port. I appreciate the info help (and the link to the Earls thing @Duncan). Though going by that it seems like 1/4 then BSP'ing it and using a bush may work. I don't know where I'd be remote mounting the pressure sender... to... exactly. I assume the idea here is that any vibration is taken up by the semiflexible/flexible hose itself instead of it leveraging against the block directly. I want to believe a stronger, steel bush/adapter would work, but I don't know if that is engineeringly sound or just wishful thinking given the stupendous implications of a leak/failure in this spot. What are the real world risks of dissimilar metals here? It's a 6061 Aluminum block, and I'm talking brass or steel or SS adapters/things.
    • And if you have to drill the oil block, then just drill it for 1/4" and tap it BSP and get a 1/8 to 1/4 BSP bush. The Nissan sender will go straight in and the bush will suit the newly tapped hole. And it will be real strong, to boot.
    • No it doesn't. It just needs an ezy-out to pull that broken bit of alloy out of the hole and presto chango - it will be back to being a 1/8" hole tapped NPT. as per @MBS206 recco. That would be for making what you had in alloy, in steel. If you wanted to do just that instead of remote mounting like @Duncan and I have been pushing. A steel fitting would be unbreakable (compared to that tragically skinny little alloy adapter). But remote mounting would almost certainly be 10x better. Small engineering shops abound all over the place. A lathe and 10 minutes of time = 2x six packs.
    • Ahh. Well the block damage is a problem, you really need to run a tap or thread chaser through it to see if the threads can be saved, but any chips are likely to be bottom end bound which is bad. Earls seem to have what you need if you want to stick with mounting direct on the block: https://rceperformance.com.au/parts/earls-straight-adapter-1-8-npt-male-to-1-8-bspt-female.html, but as I said above I'd recommend remote mounting the sender
    • I'm not quite understanding or I'm missing steps here, (I appreciate people are trying to inform my brain but I am of the dumb, especially today) - All I want to do is mount the male BSPT of the OEM sender into the system somewhere without it snapping the adapter via vibration. The Nissan sender has a male 1/8 BSPT output. The block has a (very destroyed) 1/8 NPT input. I'm not really sure how a lathe assists with that, and also don't know anybody with a lathe, nor specifically what I would want to buy. I'm not really sure how adding additional adapters creates a better, more leak proof resilient seal here.
×
×
  • Create New...