Jump to content
SAU Community

Recommended Posts

Just got my NPC Organic 10" installed and the pedal feels like an N15 pulsar's - light as. Still wearing it in but so far it feels really grippy and easy to use. A lot better than the Exedy that came out, which was slipping at 250rwkw and felt like doing a 40kg left leg press.

  • Like 1

Just got my NPC Organic 10" installed and the pedal feels like an N15 pulsar's - light as. Still wearing it in but so far it feels really grippy and easy to use. A lot better than the Exedy that came out, which was slipping at 250rwkw and felt like doing a 40kg left leg press.

My NPC Organic 10" is a rebadged Exedy unit (or vice versa), even the part numbers match. So my assumption is that a new Exedy would be just as good as a new NPC with these specs :)

My NPC Organic 10" is a rebadged Exedy unit (or vice versa), even the part numbers match. So my assumption is that a new Exedy would be just as good as a new NPC with these specs :)

nope, NPC uses Exedy parts - however their clutches are modified with different friction material and their pressure plates are modified in house.

A normal Sports Organic or Ceramic (silver pressure plate) clamps less than a NPC and the pedal effort required to disengage the clutch is heaps more.

Doug from NPC (I believe through rumours) used to work at Exedy and took his knowledge to NPC.

  • Like 4
  • 5 weeks later...

Good clutch worked well but doesnt last too long under heavy abuse compared to my previous exedy HHHDB but trade off is its easy on the box lasted 11 drift events roughly 1 year HHHDB lasted 2.5years and still was working when removed going to move up to the twin plate super coppermix competition now.

Same, mine has had over 80+ rwd launches

1 Very very bad launch at the drags which was rode mistakenly.
( had to let it cool down after that )

Many many track days, 2 1000 meter runway events

going on 2 years now i think from memory

My last 3 clutches before that where both Exedy Organic's HD

1 did ok...but that was around 300 hp.

1 fried it self after a couple of months

The other literally snapped the pressure plate.

My mate also same clutch, broke 2 of them, 1 was the same Pressure plate snap.

Exedy where awful when it came to asking wtf happened when it was sent back.

Got " you change gears to fast " ......really....

Never buying exedy again.

  • Like 1

Yeah i guess difference is in my use its cinstntly clutch kick 3rd 4th gear consecutively as appose to drag doing 1 launch then it has time recover and cooldown or circuit driving its proper shifting. But like i said definately good clutch in terms of what it can take for such a low camping force and does save boxes.

The only exedy that is good is the hhhdb clutch disc is identical to the npc with only diff having a massive 1500n clamping load pressure plate lol but rest of the mild exedy clutches dont take much abuse.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...