Jump to content
SAU Community

New Plx O2 Gauge With Bosch Lsu4.9 Sensor

cobrAA

By cobrAA,
in Engines & Forced Induction

 Share

Recommended Posts

cobrAA Mentor

cobrAA

Posted
Posted

PLX came out with a new wideband gauge.. the biggest factor is the new bosch LSU4.9 sensor

http://www.plxdevices.com/product_info.php?id=WDBDSMAFR_DM6G4

The idea is cool.. but how useful it is if, for exemple, most, if not all, aftermarket ECU read through the the old LSu4.2 sensor.

It would be cool if the ECU could take this improved signal to offer a better tune. What's your take on this ? over-rated or should it actually provide a better tune ?

As for now, I prefer to have a gauge that tell me what the ECU read also ( instead of having a gauge more accurate than the ECU's signal)

Ben C34 Grand Master

Ben C34

Posted
Posted (edited)

What do you mean?

The stock ecu only uses a narrow band so you can't really have a gauge for that.

Aftermarket management can use a wideband 0 to 5V input which wouldn't matter if It's the old or new sensor being used. I imagine the benefit of the new sensor is it is faster.and I've never heard anyone complain that their wideband is too slow (assuming the sensor is in good condition) . You don't t need the negatives quick response the new sensor gives you.

Edited by Ben C34
cobrAA Mentor

cobrAA

Posted
  • Author
Posted

Sorry I wasn't clear lol ! :( I meant, for Aftermarket ECU, like a haltech, motec or any other ecu actually that use a wideband not the stock narrowband.

I was interesting in upgrading to this new sensor to have a better tune but it appears the lsu4.9 is not compatible with the lsu4.2 so i cant swap this new sensor with my actual wideband on my haltech unit.

Correct me if I'm wrong, but I don't see the use of using this new gauge/sensor since my ECU will read the 4.2 sensor. I rather see what my ECU see rather than my ECU read something and I see something ''more accurate'' with the new PLX.

Does that make anymore sens ? lol

GTSBoy Grand Master

GTSBoy

Posted
Posted

Does that make anymore sens ? lol

Not really. You can't really run closed loop off a wideband under load anyway. The O2 sensor is just not fast enough to work properly. Ergo, all you end up doing is running a closed loop target for cruise loads that is something other than 14.7:1, and I'm sure that a slight extra improvment in "accuracy" from one sensor to another is hardly worth getting in a froth over.

Now, I know that most wideband units can output a synthetic narrowband signal.....so if perhaps (and I haven't looked) your proposed new thingo can output a synthetic 0-5v wideband that you could pipe to your ECU, you could both have your cake and eat it too. New sensor and controller, equivalent of old sensor piped to ECU.

Sarumatix Veteran

Sarumatix

Posted
Posted (edited)

So you want to know if a Haltech ECU (such as ps2000) can run a Bosch LSU4.9 such as this: http://www.ebay.com.au/itm/Genuine-Bosch-wide-band-lambda-oxygen-sensor-0-258-017-025-LSU-4-9-WIDEBAND-/140893587376?pt=AU_Car_Parts_Accessories&hash=item20cde987b0&_uhb=1 ?

Good question :). I have sent it directly to Haltech to find out.

Edited by Sarumatix
Sarumatix Veteran

Sarumatix

Posted
Posted (edited)

LSU4.9 has been around for awhile and used to cost a lot more. It seems that they are actually cheaper now on ebay than 4.2s and that bosch wants to push customers to 4.9s, just about all modern vehicles are using 4.9s in OEM configuration. 4.9s are basically more durable, faster responding, and more accurate.

Edited by Sarumatix
Sarumatix Veteran

Sarumatix

Posted
Posted

Got a response from haltech.

The Haltech wideband controller uses the LSU4.2 sensor. You could use a different brand controller which uses a later LSU4.9 sensor, then feed the 0-5v signal from the controller into a spare Haltech AVI channel.

So... no :). I have also read further information that it suggests a 4.9 is totally amazeballs better and in some applications might be worse. *shrug*.

  • 6 months later...
scotty nm35 Grand Master

scotty nm35

Posted
Posted

I doubt it, unless you run a finned o2 sensor spacer.

I think the 4.9 may be less susceptible to carbon buildup in rich running petrol applications, but with e85 either is fine. Make sure any moisture can drain out of the little hole at the tip of the sensor or it will fail quickly, and mount it a few feet from the turbo with a new bung. (Usually near the gearbox crossmember)

32GTR use smaller O2 sensor threads anyway don't they?

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      Chris' Toyota Mark ii JZX110

      By PranK · Posted

      This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • soviet_merlin
      Duncan's V37.......race car?

      By soviet_merlin · Posted

      Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • Murray_Calavera
      Jacks that fit under GTR lips that can reach the subframe?

      By Murray_Calavera · Posted

      My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Duncan
      Chris' Toyota Mark ii JZX110

      By Duncan · Posted

      Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...