Jump to content
SAU Community

Recommended Posts

I thought they had some like "this vin has this key" system and could refab it from there.

I think warpspeed said something about being in japan but i couldnt really understand what he was on about.:P

Well If you drive a late model Skyline that was never sold by Nissan in this country, it is quite probable that your local Nissan dealer is not going to have documentation to decode the VIN, and be able to just quickly whip around the back of the parts store and produce the exact key you need on the spot.

I keep the key and the spare remote in the boot (hidden) I have a boot release switch (electric) mounted under one of the gards also hidden, The key and or anything else won't open the boot as the lock is disconected.

if I was dumb enough to loose my keys, I can simply pop the boot (setting off the alarm) and retreve the spare key and remote. Quite simple really.

Damqik.

wow now i know how to nick DAMQIK n Warpspeed's lines... anyone else wanna cough up how to break into their car... careful guys, this IS an open forum

Well Funky, I can get into yours anytime I want with a fifty pound sledge hammer. It is much quicker too, like a demonstration ?

Seriously though, if someone really wants into your car there is no way to keep them out. But having your own sneaky way in is the smart thing to do.

If all you do is hide the key, well yes, the insurance company may not be real impressed if it goes off one day, and is found stripped and burned with no forced entry.

But if you have SEVERAL security devices to lock, alarm, and immobilise the vehicle, then getting in is really only the beginning of several problems for the would be thief.

Another point is that when you buy a commercial alarm kit, they give you those silly warning stickers for the windows. This tells the thief exactly what you have fitted. Make your own stickers. The word ALARM is all you need.

I am also convinced that a very visible, very ugly, huge, enormous and immensly strong homemade steering wheel lock is a better deterent than any cheapie hardware shop special.

It demonstates that you are serious, are a bit of a handyman, and probably have a few other little surprises fitted as well.

Originally posted by funkymonkey

wow now i know how to nick DAMQIK n Warpspeed's lines... anyone else wanna cough up how to break into their car... careful guys, this IS an open forum

I doubt that anybody could get into my car the way that I mentioned as all is hidden, the most likely way any of our cars are gonna be pinched is on the back of a truck! (with Alarm SCREAMING) as no matter of hot-wireing is gonna get my car running for someone to drive off with it.

DAMQIK

Well funky, the actual door catch mechanism bolted to edge of the door is connected to the lock barrel, and the door lock tab with long metal rods. There may also be a third rod connecting to an electric lock/unlock solenoid mounted inside the door.

Now the way your thief gets into the car is by either lifting the locking tab with a coathanger, or something. Or else jambing a huge screwdriver into the lock barrel, and with his massive tatooed arms, ripping the lock barrel around, and out of the door.

Bingo he is in. The screwdriver method takes two seconds, and anyone casually watching from a distance would not even realise he did not use a key to gain entry.

Now if you remove the metal rod to the lock barrel, even with the correct key (or a screwdriver) rotating the lock is not going to get you in. Your door and paint is badly damaged though. This is how I lost my car. The screwdriver trick also works the same on the ignition lock. Ask me how I know (sigh....)

So what you do is connect your alarm to your electric central locking. Push your remote, and all doors unlock.

A hidden key is not going to get you into the car though, but it will still get you into the boot, where you hide a spare remote, and a spare key for the steering wheel lock.

DAMQUIK uses a hidden button to gain entry, this may be better, depending on the particular circumstances.

If you are going to respray your doors, I would totally remove the lock barrels, to totally confuse and frustrate the bad guys. Make your doors look better too.

Removing the Barrels sound like a good idea.

Maybe see if the passenger side Door Handle will slide in place of the drivers one?

The passengers door handle doesn't have the barrel in it.. Hence it will look good.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Stock RB fuel pressure is near enough 43.5 psi, so the latency in that table at 31.6 will be close. You can see that 7 or 8 psi equates to about 0.4µs extra latency. So if you wanted to interpolate between the 31.6 and 39.9 psi values you could say you're going up about 2 psi out of those 8, so add about 0.1µs, which is barely worth talking about and is quite possibly wrong because ideally you would fix the latency while running at the appropriate conditions on the dyno, with a wideband sniffing its butt.
    • The pressure, is what you set the fuel pressure to. If you have the factory fuel reg, you'll need to find the factory spec. I don't know it off the top of my head, but someone else might.
    • For others, what GTSBoy states here should be paid attention. Why? Well lots of people play with different engines, and they LOVE to change things like remove AC, or steering pumps etc, and it lends to them needing to move the tensioner too. You want your tensioner, particularly those that are sprung or hydraulically tensioned, to be the first thing after the harmonic balancer, or technically the "last" pulley in the chain. By saying last pulley, I mean look at the direction the crank spins when the engine is running, follow the belt from where the crank is pulling the belt FROM, and keep following that until you're between the last pulley/accessory on the belt and about to reach the crank again, this is the spot where you put the tensioner. This is the area that will always end up with slack. This is worked out exactly the same way for chains too, as the physics is the same for them. The crank pulley is where all the force to drag the belt around comes from. You will never ever get rid of the slack that appears, especially under load. The tensioners job is to keep the belt loose enough when stationary that there shouldn't be out of sync movement in slow movement, and then be tight enough when running, that the belt can't jump off any gear and get damaged. Too tight, bad things happen, too loose, bad things happen. Have a tensioner (mainly sprung/hydraulic one) in the wrong spot, it can't actually do anything about keeping the tension.
    • It was gonna take much longer for the 440cc so I'd thought I'd risk it with the 550cc. They finally arrived and I couldn't wait any longer (I could but I was quite excited after 2 months) and installed them myself. Removed the old injectors, inserted the new and connected everything up. Before starting the car, I tuned the injector size from the factory 270cc to 550cc using Nistune.   This did some of the calculations automatically which catered for the TIM. The latency however did not seem to change. Deatschwerks have the tuning data available for each injector online, and I had a look at it. It has a table which relates to latency according to pressure and voltage (see below image). Nistune requires the 14v value, but I am unsure of which pressure value to look at (my lack of knowledge and experience have something to do with this). The highlighted value is close to my current latency which is 760µs. It is for 14v which makes sense, and the pressure is 31.6 Psi.   I still gave the car a test drive to see how it goes, and honestly it has never felt so powerful before (and some people say the RB20DE is very weak?). I really enjoyed the drive. Side note; The injectors are quite noisy, which someone mentioned before. This does not really bother me however. I will still ask my mechanic to have a look at it and perhaps ask a tuner to fine tune it if they have the knowledge.
    • Also true. But imagine not wanting new injectors? Imagine wanting to use 30 year old injectors?
×
×
  • Create New...