Jump to content
SAU Community

Recommended Posts

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

Well Said jake32..

Well said!

The cost of buying GTR's (decent) has gone up in Japan, and looking at the stock from the currently available list- I wouldn't touch em'.

You cant beat the piece of mind of taking the car for atest drive yourself before you go blow 4 years of debt! I am with Jake32 on this. If you honestly think you will get lucky and import a car that is everything you want to save $2-3K then do it! Take the Risk. I am fairly confident that if the car is any good, at the end of the day you will be pushing close to $25K anyway!.

Good luck- I am outa here

no offensive but why is mid 20s as cheap as they will get, considering at the moment i could import one myself for maximum of 20-22K, through an importer

There is no final decision in regards to the 15 year rule, and as such people can continue to import 89 cars.

Jake gave a very good description of why. Supply is short, good quality 89 GT-Rs are getting harder and harder to find, and it may be the case that 90+ cars will be forced through SEVS which will cost *at least* an additional $3-4k and maybe more (as you can only bring in good stock examples, so they will become even more sought after).

Plus they are close to a collectors item/classic I think....

LW.

no offensive but why is mid 20s as cheap as they will get, considering at the moment i could import one myself for maximum of 20-22K, through an importer

There is no final decision in regards to the 15 year rule, and as such people can continue to import 89 cars.

so if you imported one yourself for 20-22k .... paid the cash upfront waited the time ..did all the bullsh*t rwc etc...how much would you sell it for ????

about mid 20`s you would reckon :P

The above situation is identical to most other services / situations in the car industry..you pay for convenience.

Take FMIC piping for example.

I work in an industry where we deal with steel sections all day long, and the price of better quality piping than FMIC piping is about $50 worth in the kit. To get someone to cut it and bend it in a workshop ~ $100.

But you're paying for the convience ... are you going to cut it & measure it & bend it yourself for a total of ~ $150 - or pay $500+ for a ready to go kit?

Same as imports..in the end, everyone's trying to get paid, and ignorance / laziness is what sets the bar...

As one of the Pioneering '89 importers (I bought my car back in June last year and imported it January this year!) I can honestly say it was a long, expensive and stressfull process. Yes, it cost more than expected, but being one of the 'First' buyers of '89 GTR's I was able to select a damn good example.

Anyone who thinks that paying mid 20's for a good '89 GTR is too much, I say DO IT YOURSELF THEN! - one you have gone through all the sh*t, then tell me that you would not want a decent price for that car!

I whave been in later model GTR's and they are not in as good a nick as my car!

I did consider buying one locally, but you still don't know how 'good' it is - and to get a good car locally prepair to pay early to mid 30's. Yes there are cheaper out there - I will leave you to take the the risk :( old saying - you get what you pay for....

for all the guys that don`t want to pay mid 20`s for a car they can inspect.drive etc...check out this ripper ...bargin

then have a look at the auction sheet attached for this sh*tbox(the real story) :accident grade ,5 panels replaced including rhr qtr ,core support changed,inner guard repair,roof and both door repaired,has had full repaint and needs more ,mileage unknown..a dog basically @$18600+++

jake32: ouch, that's a faily hideous example there. :throwup:

I have always said that budgeting $25k is appropriate. Even if the car lands here for a bit less, you still need some slack for things like clutches, brake pads, oil changes, other consumables, and that's assuming that everything is mechanically A-OK.

LW.

hey did everybody else lose 3 demerit points for talking cars in the wrong playground...i dont wish to sound childish....but ...RENI started it.....where are u RENI u started the thread in the wrong section...then pis*ed off ...we just came in like bunny`s

its a set up...i`m pleading not guilty

hey did everybody else lose 3 demerit points for talking cars in the wrong playground...i dont wish to sound childish....but ...RENI started it.....where are u RENI u started the thread in the wrong section...then pis*ed off ...we  just came in like bunny`s

its a set  up...i`m pleading not guilty

Yeah I did too .. muthaf*cka acting like we posted a f*cking virus on here.

  • 2 weeks later...
Thanks for explaining that in the pm, which you never replied to, top bloke.

Excuse me you rude person,,,Is there a valid reason why you still haven't read the rules. I'll recommend your business to everybody I can on the east coast now. :bs!: :bs!: :bs!: :bs!: :bs!:

Neil.

bad language removed. thanks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Johnny is sad now... Because you didn't get Bosch Motorsport ABS.  
    • Hey keep the ideas coming, I'm always keen on projects! But, problem fixed!  I got a cheapie ozito scope from Bunnings and had a good look in and around the bearing and sensor hole. I couldn't see a smoking gun but the bearing looked a bit strange, especially when comparing with a new one. I thought the cover had come off the bearing magnets.  Sorry for pics of a screen, I didn't have an SD card.     Good thing I had the old one to inspect. So, given I'm like a pit crew with wheel bearings and luckily I had a spare bearing because I f**ked up my parts order, I decided to just smash it out. Got the old one out in about an hour. So much easier when the parts haven't had a chance to rust together yet. 😂 And, well, found the problem.    In the second pic at about the 8 o'clock position, you'll see what I think is the tip of the old sensor.  The new sensor has definitely been rubbing but it's all intact, just a little shiny so I'm hoping it's fine.  The car brakes perfectly now and no errors.  I think the job took about 2.5h in the end. 👍🏻 I really appreciate the help in here as usual. Thanks guys.
    • I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
    • So...not sure if you know if that has always been there or why you went looking. It could be old damage from a clutch explosion, or even just the gearbox got dropped somewhere along the line. Basically, you should seal it up to stop oil and dust getting into the bellhousing, but it doesn't matter too much and is not structural. I'd suggest something like a glob of JB Weld. BTW what gearbox oil are you running, I would guess the breather has been spewing it everywhere.
    • Hey Duncan thanks for your reply. Sorry mate I know the photos are shit.  Took another photo for reference. Seems the casing does have a hole in it looking on the net, fluid seeping out. Added a photo   
×
×
  • Create New...