Jump to content
SAU Community

M35 Suspension Upgrade Assistance

James Hamilton

By James Hamilton,
in Four Door Family & Wagoneers

 Share

Recommended Posts

James Hamilton Rookie

James Hamilton

Posted
Posted

Hey guys,

My suspension is just about to die. i would like to upgrade it to something a little more sporty.

I don't want anything too stiff it is my daily.

So far i have found two kits that say they fit. anyone have any experience with either of these kits.

Tanabe - NF Kit Coilover

http://www.jdmconcept.com.au/part/tanabe/nf-kit-coilover/stagea-nm35-vq25det

BC Racing Coilover Suspension Kit

http://justjap.com/index.php/manufacturers/bc-racing/bc-racing-coilover-suspension-kit-nissan-stagea-nm35-awd.html

Also quite inexperienced with suspension.

any help would be greatly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/448132-m35-suspension-upgrade-assistance/
Share on other sites
Z33Fairlady Contributor

Z33Fairlady

Posted
Posted

Hi Jerry,

I have the Tanabe Sustec NF coilover on my M35 Stagea (this was already on the car when I purchased it).

If I had stock suspension, I would be going for the BC based on other owner's recommendation. The Tanabe NF Coilover is not damper adjustable and is more suited towards comfort

Daleo Grand Master

Daleo

Posted
Posted

Thanks guys I'll order them today.

Does anyone have any idea how much they will cost to get fitted?

Most places will charge $500 and upwards to fit & set heights. This would also include a wheel alignment, and possibly corner weighting.

The reason is; most places will have to do a bit of trial & error to get it right, so it will be up and down a few times once the shocks/springs are fitted to ensure everything is hunky dory.

  • 7 months later...
conan7772 Mentor

conan7772

Posted
Posted

Ok time to get rid of the stock suspension.

Man the car drives nice but I think my 95 Camry wagon had less body roll.

I think my springs are fatigued ,14 years old if they're the originals.

Looks like BC's are a good choice from all the +1s

I've driven 4 M35s, 2 of which had Nismo springs, according to the owners.

The ride was much more direct, still comfortable too.

The springs were yellow progressive. I'm not sure what spec these were as the S tune are red.

The S-tune are advertised as 20% stiffer.

Anyone know what the BC BRs are %.

I've also noticed quite often people are selling their S-tunes.

It would be good to know what people didn't like about them.

Also looking for some solid sway bars.

Anyone still making them for 250t RS Four

Any input would be great.

Cheers

  • Like 1
Brick Mentor

Brick

Posted
Posted

Ok time to get rid of the stock suspension.

Man the car drives nice but I think my 95 Camry wagon had less body roll.

I think my springs are fatigued ,14 years old if they're the originals.

Looks like BC's are a good choice from all the +1s

I've driven 4 M35s, 2 of which had Nismo springs, according to the owners.

The ride was much more direct, still comfortable too.

The springs were yellow progressive. I'm not sure what spec these were as the S tune are red.

The S-tune are advertised as 20% stiffer.

Anyone know what the BC BRs are %.

I've also noticed quite often people are selling their S-tunes.

It would be good to know what people didn't like about them.

Also looking for some solid sway bars.

Anyone still making them for 250t RS Four

Any input would be great.

Cheers

Yellow is what I have, they were a nissan factory option that lowered the car 2" from stock. I would say your issue is more the shocks the springs, but if you are doing shocks you may as well do it all.

zelda Enthusiast

zelda

Posted
Posted

Most places will charge $500 and upwards to fit & set heights. This would also include a wheel alignment, and possibly corner weighting.

The reason is; most places will have to do a bit of trial & error to get it right, so it will be up and down a few times once the shocks/springs are fitted to ensure everything is hunky dory.

$500? I had all that done at Bridgestone in nz with a second free wheel align a month later for $180 and it didn't budge after a month of heavy testing lol

Daleo Grand Master

Daleo

Posted
Posted

$500? I had all that done at Bridgestone in nz with a second free wheel align a month later for $180 and it didn't budge after a month of heavy testing lol

It's good that they did that for you; but in my experience in NSW this is a pretty standard charge.

Over here, it's pretty normal to pay $90 just for a wheel alignment.

Even just the removal of the old, and install with no adjustment on a set of coilovers would take at least 1.5hours, and at the average $90-$120 p/h that's still a decent expense.

Adjustment would be at least another hour on top, so I still stand by my estimate.

  • 4 weeks later...
DrLui Collaborator

DrLui

Posted
Posted

How do people find the BC Spring rates?

Ive been looking at the TEIN Street flex and they have 10k/9k front and rear respectivly, and at the moment RHD Japan have them discounted and put them at the same price as the BC

http://www.rhdjapan.com/tein-street-flex-coilover-suspension-nm35-pnm35.html

Daleo Grand Master

Daleo

Posted
Posted

For a little bit more than BC's, I would recommend talking to Josh at MCA.

They make an excellent NM35 specific product that can be sprung and valved to suit your specification.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      RB25DE NEO with Haltech ECU

      By Murray_Calavera · Posted

      You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • GTSBoy
      RB25DE NEO with Haltech ECU

      By GTSBoy · Posted

      Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
    • GTSBoy
      R34 25GT Engine Light 21

      By GTSBoy · Posted

      Could be correct. Meter might be that far out. Compare against a known 5 ohm 1% resistor.
    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap.  (edit: I went out and did it right now, the line I had chosen did appear to have no vacuum on it, it used to go to the front of the intake, I've now completely blocked that one off at the bracket that holds several vacuum lines by the firewall.  I T'd into the vacuum line that goes from that bracket to the vacuum pump at the front of the car, but no change in the MAP readings).  Using the new vacuum line that has obvious vacuum on the hose, im still only getting readings between -6.0 and -5.2.  I'm wondering why the ECU was detecting -5.3 when nothing was connected to the MAP nipple and ECU MAP selected as the source. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
×
×
  • Create New...