Jump to content
SAU Community

Recommended Posts

Hey there guys just went to tighten down my seats to the floor a touch and my I got a touch carried away with the impact wrench and stripped the threads on two bolt anyone recommend a place to buy hitenstile strength bolts of the sam thread and similar length?

Link to comment
https://www.sau.com.au/forums/topic/448220-seat-mount-bolts/
Share on other sites

Ok Cheers Scott same thread tap it is and some thread lock no?. M10 x1.25 sounds right that helicol thing looks pricey. While I'm at it I'll far up some spacers for the passenger seat.

Scott have you got the flairs for the axis still?

Grand cheers scott. I couldn't get any M10 x 1.25 so I retaped to 1.5 and grabbed some corresponding bolts and all is good cheers gents

I wouldnt say that's all good at all. That's heaps dodgy. How much thread do you think is actually holding now?

I wouldnt say that's all good at all. That's heaps dodgy. How much thread do you think is actually holding now?

But it's only the seat. Not like it's the ashtray, or anything similarly important.

  • Like 1

How is it not its re tapped to 1.5 with new M10 x 1.5 bolts so all the thread holding now. The ashtray is held in with bluetac champ :-P

It's dodgy as.

If you are happy with it thats all that matters.

There's hardly any thread actually holding. I thought that was pretty obvious but it seems it isn't. I could draw a picture for you but really can't be bothered. Maybe when I'm at work I will so you can see just how little thread is actually holding.

Edited by Ben C34

Now, I'm no engineer but I don't think it's the bolt thread you need to worry about, it's the fact you retapped an M10 hole from 1.25 to 1.5. With the original tapping of the 1.25 pitch a certain amount of metal has cleared out, and overlapping the same diameter with a 1.5 pitch doesn't put back all the metal previously removed by the 1.25, it just shaves extra away, meaning the mating face between the bolt and hole is patchy, and alternates between a full face and almost nothing at all.

...Or am I completely wrong here? I've never had to retap a hole, only remove broken bolts that thankfully didn't damage the thread.

Now, I'm no engineer but I don't think it's the bolt thread you need to worry about, it's the fact you retapped an M10 hole from 1.25 to 1.5. With the original tapping of the 1.25 pitch a certain amount of metal has cleared out, and overlapping the same diameter with a 1.5 pitch doesn't put back all the metal previously removed by the 1.25, it just shaves extra away, meaning the mating face between the bolt and hole is patchy, and alternates between a full face and almost nothing at all.

Surely to make a safe fit an M12 (maybe?) bolt should be used and a larger hole tapped accordingly.

...Or am I completely wrong here? I've never had to retap a hole, only remove broken bolts that thankfully didn't damage the thread.

Now, I'm no engineer but I don't think it's the bolt thread you need to worry about, it's the fact you retapped an M10 hole from 1.25 to 1.5. With the original tapping of the 1.25 pitch a certain amount of metal has cleared out, and overlapping the same diameter with a 1.5 pitch doesn't put back all the metal previously removed by the 1.25, it just shaves extra away, meaning the mating face between the bolt and hole is patchy, and alternates between a full face and almost nothing at all.

Surely to make a safe fit an M12 (maybe?) bolt should be used and a larger hole tapped accordingly.

...Or am I completely wrong here? I've never had to retap a hole, only remove broken bolts that thankfully didn't damage the thread.

Mate I'd love a picture I'll hang it on my fridge with the other kids drawings :-P

You should. That might show you why you should actually fix it properly. I'm not going to waste anymore of my time.

It is unsafe. Barely any thread is holding the seats in. I'm sure they won't fall out in general driving, and I truly hope your car isn't involved in a crash.

Now, I'm no engineer but I don't think it's the bolt thread you need to worry about, it's the fact you retapped an M10 hole from 1.25 to 1.5. With the original tapping of the 1.25 pitch a certain amount of metal has cleared out, and overlapping the same diameter with a 1.5 pitch doesn't put back all the metal previously removed by the 1.25, it just shaves extra away, meaning the mating face between the bolt and hole is patchy, and alternates between a full face and almost nothing at all.

Surely to make a safe fit an M12 (maybe?) bolt should be used and a larger hole tapped accordingly.

...Or am I completely wrong here? I've never had to retap a hole, only remove broken bolts that thankfully didn't damage the thread.

You are correct.

Although M12 might be pushing it. A helicoil would be better and will work.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...