Jump to content
SAU Community

Recommended Posts

Hey Guys

Parked my skyline r33 series 2 Silver, at the hoppers crossing train station when i went into work this morning. Came bck and the car was gone.

Can you please keep an eye out and spread the word that it has been stolen.

Its preety much stock with aftermarket suspension and exhaust. Disdinguishing features are The headlights, they are tinted light blue and it has angel eyes.

Also it has r34 GTT wheels on it.

Rego UES 309

My mobile number is 0431 641 533

post-27272-0-04205400-1409920470_thumb.jpg

post-27272-0-51836700-1409920480_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/448309-stolen-skyline-werribee/
Share on other sites

There is cctv footage at the carpark, cops didn't seem to know anything about it. Hope they follow it up anyways. If it was up to me I would never leave it at any train station car park. But sometimes circumstances dictate necessity. Fingers crossed I get her back in one in one piece.

Thanks again for keeping an eye out :yes:

Edited by SKEET

Great news !!!

Cops found my car last night. Its currently at their assessing center waiting for forensics to process it. Had a quick peak over the fence. Front bumper is off, hope that's the only damage on it but will get more info once the police are done with it. And yes it did have an alarm

That's horrible! Glad to know it's been found though. There are a tonn of scammers on gumtree who are able to get your car refund the cash and then either dismantle the car for parts or ship them overseas, that sucks that you had to go through that

Insurance company took it for assessment on Wednesday & said it will take 3-5 days before they make a decision to fix or write-off. Communication from police has been poor, no updates from them and no one picks up the phone at the station when i call. Hope they fix her and i can get it back ASAP

Is the assessment centre at a tow truck/ car repair joint?
Contact them directly as they probably wouldn't contact you, then make you pay for storage space like they tried to do with me.....

on a side note... dose anyone know when i can get one of these

http://www.sau.com.au/forums/topic/448357-wtb-r33-s2-tommy-kaira-style-front-bar/#entry7384011

I'm guessing as soon as you have the money/one becomes available for sale.

Terribly sorry about your skyline, look into getting a private accessor because the insurance company will offer you peanuts if they write it off.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...