Jump to content
SAU Community

Recommended Posts

At the risk of sounding like a idiot im having some issues. I have a r33 gtst. Ive just recently replaced the std fuel pump with a walbro255lph and since ive installed it the car has been running like a dog. Its been splattering and just generally running like a pig lol. So i really need some help would the best bet just put the std back in until i get a tune? Or is there something else i can do in the mean time to get it running half normal again

Link to comment
https://www.sau.com.au/forums/topic/448830-fuel-pump-issues/
Share on other sites

Unless your car was tuned to suit a half dead pump putting a walbro in won't make it run bad or need a tune..

Ideally you will have run a direct feed to the battery, but again, if not there won't necessarily make it run like crap.

Yeah its doing my head. So i guess eother put the half dead one in then when i get it tuned put the walbro back in or just dont drive it until i get it tuned lol

Edited by cav33r

So if the direct power souce doesnt work then i can rule out everything else and bascially conclude the pump was a dud

There is also the actual fitting of the pump - location in the cradle/tank, attachment and orientation of the pickup and filter and correct connection of the fuel lines.

Fuel lines have been put back to orignal positions so no real issue there. And it sits in the cardle basically the same as the standard one and put the cradle back in the housing in the tank. So basically exactly how the standard one was is how the walbro is. Ive just emailed the guys i bought it off to see if they will send me a replacment one under their warranty basically to see if it is the pump or somethin else.

And i used the orginal sock off the standard pump because i was looking at the tiny tiny sock they supplied with the pump and basically said yeah no lol. So i put the orignal longer sock back on it

Some workshops can run the new pump in vitro to check flow rate.

I once had a brand new but faulty 044 and the flow rate was barely over 20.

Had to replace it with another 044.

Yes, the faulty one was genuine from Just Jap; but alas, Bosch would not honour the warranty.

They did pull a swifty though. After testing in Melbourne they sent it back in the original box. But it didn't have the texta mark I placed on the faulty one. Caught the buggers out!

Hahaha shifty ones. Well ill see how i go. If i can handle this company to send me a replacement pump and i get it fitted and it still does the same then i have to look deeper into the issue but if it doesnt well it was obviously the pump then. So fingers crossed

Ive just been doing some more reading on what could possibly be causing this problem besides it being a dud pump, ive found that pump i have may not necessarily be a high pressure and if there is any more then 60psi of pump pressure running through it it could cause it to drop in power. I had a look at my fuel reg this morning while on idle and it was showing like 105 psi so obviously under load and boost the fuel pressure is sky rocketing. So my thoughts is if i drop the fuel pressure and get the combined fuel and boost psi under 60 should it then resolve the problem?

No way should you be running 105 psi base.

That's mental.

Like really mental.

You have problems. You can't just drop the pressure on the reg and expect the car to run correctly.

Edited by Ben C34

i know it is i haven had it tuned since ive gotten the car. Previous owner had it tuned to that . Ive just now realized how stupid high it is. I look at it this morning and got a little bit confused.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
×
×
  • Create New...