Jump to content
SAU Community

Recommended Posts

At the risk of sounding like a idiot im having some issues. I have a r33 gtst. Ive just recently replaced the std fuel pump with a walbro255lph and since ive installed it the car has been running like a dog. Its been splattering and just generally running like a pig lol. So i really need some help would the best bet just put the std back in until i get a tune? Or is there something else i can do in the mean time to get it running half normal again

Link to comment
https://www.sau.com.au/forums/topic/448830-fuel-pump-issues/
Share on other sites

Unless your car was tuned to suit a half dead pump putting a walbro in won't make it run bad or need a tune..

Ideally you will have run a direct feed to the battery, but again, if not there won't necessarily make it run like crap.

Yeah its doing my head. So i guess eother put the half dead one in then when i get it tuned put the walbro back in or just dont drive it until i get it tuned lol

Edited by cav33r

So if the direct power souce doesnt work then i can rule out everything else and bascially conclude the pump was a dud

There is also the actual fitting of the pump - location in the cradle/tank, attachment and orientation of the pickup and filter and correct connection of the fuel lines.

Fuel lines have been put back to orignal positions so no real issue there. And it sits in the cardle basically the same as the standard one and put the cradle back in the housing in the tank. So basically exactly how the standard one was is how the walbro is. Ive just emailed the guys i bought it off to see if they will send me a replacment one under their warranty basically to see if it is the pump or somethin else.

And i used the orginal sock off the standard pump because i was looking at the tiny tiny sock they supplied with the pump and basically said yeah no lol. So i put the orignal longer sock back on it

Some workshops can run the new pump in vitro to check flow rate.

I once had a brand new but faulty 044 and the flow rate was barely over 20.

Had to replace it with another 044.

Yes, the faulty one was genuine from Just Jap; but alas, Bosch would not honour the warranty.

They did pull a swifty though. After testing in Melbourne they sent it back in the original box. But it didn't have the texta mark I placed on the faulty one. Caught the buggers out!

Hahaha shifty ones. Well ill see how i go. If i can handle this company to send me a replacement pump and i get it fitted and it still does the same then i have to look deeper into the issue but if it doesnt well it was obviously the pump then. So fingers crossed

Ive just been doing some more reading on what could possibly be causing this problem besides it being a dud pump, ive found that pump i have may not necessarily be a high pressure and if there is any more then 60psi of pump pressure running through it it could cause it to drop in power. I had a look at my fuel reg this morning while on idle and it was showing like 105 psi so obviously under load and boost the fuel pressure is sky rocketing. So my thoughts is if i drop the fuel pressure and get the combined fuel and boost psi under 60 should it then resolve the problem?

No way should you be running 105 psi base.

That's mental.

Like really mental.

You have problems. You can't just drop the pressure on the reg and expect the car to run correctly.

Edited by Ben C34

i know it is i haven had it tuned since ive gotten the car. Previous owner had it tuned to that . Ive just now realized how stupid high it is. I look at it this morning and got a little bit confused.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...