Jump to content
SAU Community

Recommended Posts

iv had cases of oil leaks before but asumed it was leaking from the oil catcher though i did get that replaced

now i noticed theres still leaks but its not coming from the catcher but from some sort of filter under the pod i think its a breather ?

iv attached a picture of how my catchcan settup is and where the leaking is from (brown shading represents oil leaks)

http://i.imgur.com/P3jxTH7.png

the catchcan itself seems literally empty

my question is why isnt the catchcan catching the oil? but passing down through the breather

The oil catch can doesn't catch the oil because it doesn't see any blow-by gases through it.

The catch can shall be between the rocker cover and the breather/intake pipe.

As is your catch can is totally useless.

ah i see this whole thing is plumbed incorrectly then and despite the several mechanics i went to about it didnt mention anything

even though the breather is before the catchcan wouldn't the can at least catch something other side of rocker cover?

i have a feeling the can might be installed incorrectly by the mechanic too lol

just figured that the breather/filter i was confused about was there to vent gases/oil to atmosphere instead of the intake

Edited by KrazyTurk

Yep that's a fairly retarded way to plumb in the catch can. It would only catch what's coming out of the inlet cam cover

How much is coming out anyway? A healthy engine none should come out.

  • Like 1

That means two things

1 your engine is tired.

2 your catch can sucks. It should be baffled.

Actually it doesn't necessarily mean 2 until such time as he sets the plumbing up properly and then oil still comes out the vent.

OP......you need the catch can to be in the path between the engine and the vent. Merge the two hoses from the cam covers together and hook them to one connection on the catch can. Connect the vent to the other port on the catch can. Run it and report back. If the can works, then there will be oil in it. If the can doesn't work (per Ben's suggestion above) then there will be oil in it and oil outside it!

worth noting that the filter/breather is a bad idea. Hook it up to the turbo intake.

1. It's illegal

2. the filter material will become soaked in oil and drip. also it's a fire hazard

3. Supposedly exposing the crank case to vacuum from the turbo will help keep the rings on their seats with a worn engine. I don't know how true this is.

4. Also if you've got blowby, and I assume you do. then boost is escaping from the combustion chamber into the crankcase where it is venting to atmosphere. typically you want this to recirculate to the turbo's inlet. I'm not sure if this would affect AFR's though

Anyway, hook up the catch can between the rocker covers and the compressor inlet. That should allow you to tick all the boxes of legality while keeping oil out of your intake

  • Like 1
  • 3 weeks later...

so i hooked everything up correctly and now noticed smoke coming out from exhaust pipe?

Ok that indicates that oil fumes are getting though the catch can so you need to baffle the catch can and/or put an air/oil seperator (could be another baffled catch can) into the line from the catch can to the turbo intake. If there is masses of oil coming out at WOT refer to the oil control thread for more answers.

When you say hooked it properly most people would take that as you hooked it up the proper way, with the catch can venting back to the inlet.

Are you sure it's hooked up properly at the moment?

That's not hooked up properly. That filter on the far right.....shouldn't be there. That hose should be hooked up to the turbo inlet pipe, so that the air that flows through the catch can into the engine has been through the AFM. We explained all that already.

It's a shame even after being told how to do it you still do it wrong, and are adamant that it's correct.

It's wrong.

Simple as that. If you don't understand that's cool, get someone who knows what they are doing to do it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
×
×
  • Create New...