Jump to content
SAU Community

Gt2859R-9 Vs Gtx2860R Response

GT-R David

By GT-R David,
in Engines & Forced Induction

 Share

Recommended Posts

GT-R David Enthusiast

GT-R David

Posted
Posted (edited)

Hi there

I'm new to the forum. I've read lots of turbo related threads on here, but couldn't find a definitive answer to my question.

I want to build an extremly responsive RB26.

I wanted to use the -9's, because of the good feedback in this thread: http://www.sau.com.au/forums/topic/322850-garrett-gt2860-9s/

Now a company here in Germany told me to use GTX2860R because they should make boost earlier than -9's they said.

After reading the GTX thread in here, lots of people aren't that happy with them, especially with the response after on/off throttle.

It's a street car for slow roads, I want an early spooling turbo an great response when on/off throttle or after gear changing. I don't care about max power. Around 500-550hp at the flywheel is enough for the streets I'm driving. And I don't want to rev the car above 7000rpm everytime.

I will get Poncams and adjustable cam gears as well to adjust it for even more response.

Has anyone driven both turbos an know which one to get? Can a GTX2860R really respond better than a -9?

Thanks in advance and excuse my bad english please.

Edited by GT-R David
Link to comment
https://www.sau.com.au/forums/topic/449379-gt2859r-9-vs-gtx2860r-response/
Share on other sites
RBN1 Mentor

RBN1

Posted
Posted

Almost like stock just with more power :-)

If you want response like that, rebuild the standards with steel wheels.

-9's are a bigger turbo and they feel like it too. -7's are a bit more responsive once again. They both fall off a bit power gain wise past 20psi.

Blackkers Experienced

Blackkers

Posted
Posted

Listen to piggaz about the cams. Many people make the mistake of using too high duration which ruins response. Adjustable gears are a good idea though.

If you only want 500-550 at the flywheel then forget the GTX and grab some -7 or -9s. 7s respond better and are generally cheaper than 9s but they don't have as much to offer in the top end.

Good luck

sneakey pete Grand Master

sneakey pete

Posted
Posted

I've heard that the GTX's will spool slightly (300rpm maybe?) faster than -5's. In the end though from powercurves i've seen that's still not the sort of thing you'd want for a dedicated street car, i'd say go -9's, i'm pretty sure that's the route i'm going to go down in the future aswell.

But that's just what i've heard....

levinboy Grand Master

levinboy

Posted
Posted

-9s here with full boost at 3800rpm 20-21psi

Built motor blah blah and 272 10.8mm cams

So can be done will be looking for even more response on the new motor with higher comp and e85 so early next year will have results

sneakey pete Grand Master

sneakey pete

Posted
Posted

What's your current power? I'd always figured that the limit on these turbos is ~320awkw's but people seem to be getting 350?

Something like a high comp 2.8 stroker that's dedicated to E85 might make a perfect combo really, if you can have full boost by ~ 3500rpm but get upto those sort of power figures

Borci88 Veteran

Borci88

Posted
Posted

What's your current power? I'd always figured that the limit on these turbos is ~320awkw's but people seem to be getting 350?

Something like a high comp 2.8 stroker that's dedicated to E85 might make a perfect combo really, if you can have full boost by ~ 3500rpm but get upto those sort of power figures

I've personally seen -7s do 365rwkw in a 34 GTR on E85. 320rwkw is about right on 98 though. -9s a little bit more.

levinboy Grand Master

levinboy

Posted
Posted

What's your current power? I'd always figured that the limit on these turbos is ~320awkw's but people seem to be getting 350?

Something like a high comp 2.8 stroker that's dedicated to E85 might make a perfect combo really, if you can have full boost by ~ 3500rpm but get upto those sort of power figures

Makes 350kw on 98

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sonicii
      Steering lock/control unit Infiniti G37

      By sonicii · Posted

      Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
    • Dose Pipe Sutututu
      What brakes on R34 GTT(Europe)

      By Dose Pipe Sutututu · Posted

      Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
×
×
  • Create New...