Jump to content
SAU Community

Recommended Posts

Hey,

I should start off by saying that I am looking at maybe getting a V36. I wanted to ask any V36 owners out there, who have been on a dyno how much power you guys are making?

And if any one has done any modifications ( catback exhaust, intake etc) or tuning (UpRev), how much difference did it make?

I apologise in advance if there is already a thread like this, please post a link to the thread if possible

Thankyou

Link to comment
https://www.sau.com.au/forums/topic/449501-v36-370gt-kws/
Share on other sites

^^^

I bought my auto V35 350GT coupe from a specialist importer. Compared to all the others I test drove, mine seems to have a noticeable advantage in acceleration over the others.

The car was auction grade 4, other than a grounding kit, tein coilovers with EDFC and the factory powerduct (with K&N panel filter), the car is stock. There seems to be very touchy throttle response, particularly at low rpm. I cannot find out what could be generating the extra power! The dealer seemed to think it was chipped. I checked behind the passengers side panel, and the ECU is stock. Would there be any other way to see if it is chipped?

A friend seems to think it may even have upgraded cams- apparently this is pretty common in Japan as it gives them a bit more low down power and torque.

By comparison, I drove one (not from the importer, but someone who was selling privately) with a kinetix plenum, stillen induction and performance exhaust, and I think mine would leave it in the dust.

I haven't done a standing 0-100 yet, nor had it dyno tested.

Edited by camr33
Link to comment
https://www.sau.com.au/forums/topic/449501-v36-370gt-kws/#findComment-7409573
Share on other sites

Yeah I did a bit of research into grounding kits, and apparently they do wonders, particularly for autos. The thread I found was for a us website, I think it was g35driver.com

Someone asked if they actually do anything and the responses were all overwhelmingly positive.

Still, great car, ant it'll run rings around my old R34

Link to comment
https://www.sau.com.au/forums/topic/449501-v36-370gt-kws/#findComment-7409711
Share on other sites

I'm still yet know a person who has installed a grounding kit and had any impact outside auto shift firmness and placebo.

Placebo is a very powerful thing.. I read many many posts about people claiming Strut tower braces had 'significantly reduced' bodyroll. which a STB cannot possibly do.

  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/449501-v36-370gt-kws/#findComment-7409900
Share on other sites

Grounding kits work for auto boxes due to the bad factory grounding. It helps shift smoother and abit harder. Another thing I noticed was my audio got a tad louder. The guys down at the audio shop said it was the grounding that made it better. Who knows...As to gaining kW....I doubt it.

I dont think it makes it look messy....then again I made sure I hid the wires where I could...looks pretty much stock.

Link to comment
https://www.sau.com.au/forums/topic/449501-v36-370gt-kws/#findComment-7409988
Share on other sites

I wouldn't say its in my head, as I didn't know it had a grounding kit until after I bought it.

But it definitely had a definite power advantage over the others I drove, like I said- is there a way I can tell if it is chipped or has aftermarket cams

Link to comment
https://www.sau.com.au/forums/topic/449501-v36-370gt-kws/#findComment-7410009
Share on other sites

I think the general sentament is the difference is not the grounding kit. something else has been done to it.. possibly a throttle controller installed which has changed the throttle body response vs pedal position. Could also have had a uprev tune, which uses the stock ECU.

Grounding kits will normally only help if you factory grounds are very poorly designed, or corroded/damaged. The extra grounding from the transmission casing to the engine/battery may help as the auto solenoids probably ground to the transmission casing, and the existing grounds are a source of voltage drop.

Did it accelerate better at full throttle, or did you just notice the throttle pedal response was different?

Link to comment
https://www.sau.com.au/forums/topic/449501-v36-370gt-kws/#findComment-7410038
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...