Jump to content
SAU Community

300Gt Auto To Manual

timmymacg
 Share

Recommended Posts

sonicii Veteran

sonicii

Posted
Posted

There never was a stock 300GT manual, so hard to say how well it will drive.

Given that.. I think that is a cheap price, make sure you get it in writing that this is a complete 'turn key' job and they will resolve any issues it creates. As it is unlikely anyone has done this before, so there is likely to be several 'unknowns' along the way.

My guess is that figure is for the mechanical work alone..

timmymacg Apprentice

timmymacg

Posted
  • Author
Posted

Thanks for the replies. Its my first auto car. My previous was a renaultsport clio which was very entertaining. Im finding the 300gt a little boring by comparison. After the responses and talking to a couple people I think I might just leave it as is until I can get something better. Lesson learned. Dont buy autos

V28VX37 Veteran

V28VX37

Posted
Posted

Yeah you will need the interior trim too and some form of electronics to run it? Because the standard ecu is for an automatic.

FWIW in my R34 the auto ECU runs fine with the manual box, even the Nistune works fine. Your mileage may vary.

I know electrical will be annoying. What benefits is there of going manual. Is will still be a gutless 30dd

Cos manual = more fun?

sonicii Veteran

sonicii

Posted
Posted

Indeed manual does = more fun. Shame there is f all manual sedans around.

There are a few.. when I bought mine, there was 2 others on carsales. But at the moment, it seems the only 350GT sedan on there is a CVT.

Guest

Guest

Posted
Posted (edited)

Thanks for the replies. Its my first auto car. My previous was a renaultsport clio which was very entertaining. Im finding the 300gt a little boring by comparison. After the responses and talking to a couple people I think I might just leave it as is until I can get something better. Lesson learned. Dont buy autos

Don't say that... Whilst a manual 350GT (for example) may be more 'fun'... I enjoy my 5 speed sports auto far more... torque torque torque and very responsive... + the manual mode is good fun if you want to hold gears :)

Have you considered selling your 300GT and using the money that you would have outlayed (eg: $3000+) towards a 350GT Coupe?

Edited by Sikahalv
sonicii Veteran

sonicii

Posted
Posted

I would just hang out until a 4dr manual appears for sale. Too many unknown 'gotchas' with converting a 300GT to a manual, unless you know someone who has done it before. You could possibly need a whole aftermarket ECU to make it work properly..

  • 2 weeks later...
timmymacg Apprentice

timmymacg

Posted
  • Author
Posted

I decided to not go ahead with the conversion. As much as I would prefer a manual I may look into a v36 sedan with the better engine and hopefully better auto. If the 5 or 7 speed auto is greatly improved over the 300gt then I could forgo a manual I a suppose. Anyone gone from the old v35 auto to the newer? And are they that much more responsive?

camr33 Collaborator

camr33

Posted
Posted

I Drove a V36 sedan, 350 GT, 5 speed auto. I was keen to buy, but the dealer could not supply the de-reg papers from Japan. Despite having a 235kw engine I did notice any major performance increase over the V35 coupes. I think it may be on account of it being heavier, and apparently they have less torque.

It was a nice car, but there was a bit of lag from the paddleshifters when changing gears.

I settled on a V35 coupe (we have a 7 seater Dualis for my wife/kids anyway) and don't regret a thing. Without a doubt, the best car I have ever owned.

sonicii Veteran

sonicii

Posted
Posted (edited)

I think it may be on account of it being heavier, and apparently they have less torque.

I thought the VQ35HR had the same torque figure? It recovered the torque the DE revup engine lost and increased power further.

And it was 230kw in the V36.

Edited by sonicii

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • GTSBoy
      RB25DET with solid lifters - which cams ?

      By GTSBoy · Posted

      I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • foney
      Cheap Gtr For Sale

      By foney · Posted

      BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
×
×
  • Create New...