Jump to content
SAU Community

Recommended Posts

I did 3 coats of color, didn't sand at all but let it dry for a few hours then did about 4 coats of clear, purely because I knew I'd probably be doing a lot of cutting back due to it being my first time painting.

Yeah that's about right...though I usually let colour dry for about half an hour only then clear...

I was told it gets a better bond to the colour this way..

I haven't painted a whole car before, but most panels I have done have been almost perfect straight out of the gun...You need your spray hun set up properly and you need good weather conditions...If these are right there is no reason it shouldn't be almost perfect without the need for much correction...

I use a 1.2 mm tip and just got some instructions for setting up the gun on Utube...and warm panels will take paint alot better than cold ones so warm them up.. I find about 30degree days to be best...use the sun heaters whatever..same with rattle can painting, always leave the can in the sun for half hour before you paint and you will find it comes out the can much cleaner and more uniform.....2-3 coats colour 5-10 minutes apart, 2-3 coats clear 30min later, wait a week and give it a quick wetrub with 2-3000 and if you laid the paint correctly it should be spot on...

The aim is to get the paint down good, not fix it later. ;)

Edited by ARTZ

Gun set up..... i had so much trouble.

And for me it was barely 20 degrees.

I totally agree with you ARTZ, but lack of skill can make it difficult.

For example; i dont have fingermarks from sanding, i have a mogul field.

I hope it turns out better than mine.

  • Like 1

your car looks pretty good tho Mik...:thumbsup:

Whats a Mogul field?

There's a really good video on gun setup I found...some real occer bloke...I did exactly as he said and nailed it first time....I have a feeling I had the same brand gun though, might of helped. :rofl:

But yeah I have a black 34 bonnet here I painted in the cold of winter, Im respraying it for him because despite heatlamps and lights going in the shed I think the cold weather has made the paint go all milky in spots....you cant see them here but they are there...this is only Acrylic post-65674-0-24637000-1414056555_thumb.jpg I never buffed it properly because I knew I would respray it...gave it a quick buzz with a 2500 grit disc and FG500..Just enough to get through winter without too much embarrassment... :P

Edited by ARTZ

Moguls:

mogul_2156261a.jpg

You can see it on my roof and other large flat areas, if you look close. Cant see it in photos.

Next time i will be more careful. And use 2 pack.

Edited by D.I.Y. Mik
  • 2 weeks later...

Haven't had much more time recently. Sanded back a few more with 2000 but yet to hit it with any polish, when I get round to it I'll update with pictures :)

If your in Sydney let me know I'm happy to come and show you exactly what to do to make it look the goods

  • 2 weeks later...

Little thread revival to ask a quick question, didn't want to make a whole other topic, what is the best way to remove dried polish from things, glass/paint ect. I wasn't real careful when I begun buffing and there's white dots of polish that are really hard to get off just about everywhere ahah.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...