Jump to content
SAU Community

Recommended Posts

Hi I was looking at my rb25det block and I tried to take a measurement on it any way my micrometer is is to big to measure the oil restrictors. So my question is I am trying to find out if these oil restrictors are stock or after market I came up to a number that seems to small to be stock, the measurement is around .055 which is about 1.40mm so I am not sure if these are stock or not. The number I came up with is probably off as I can not get a accurate measurement.

Thanks
Richard

post-137014-0-06922300-1413938824_thumb.jpg

post-137014-0-72695400-1413938843_thumb.jpg

post-137014-0-69933500-1413938874_thumb.jpg

post-137014-0-45619300-1413938904_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/449929-rb25det-oil-restrictors/
Share on other sites

I have read the oil control thread but blocking one feed and restricting the other does not sound like a good idea to me as I am running the car as a street car and hydraulic lifters. People say well the rb26dett has smaller restrictors and one oil hole blocked off but the 26 had solid lifter and not hydraulic lifters like the series 1 and 2 rb25det which means the lifters need a lot of oil. I am thinking of running a line from head to sump but not sure about the restrictors or blocking off a oil hole.

Hi Ben C34 I was using a vernier calipers.

Thanks

Richard

Can't believe you're still thinking of running a line from the head to the sump after reading the thread.

Don't forget vct supplies some oil to the top but if you are not keen on blocking off one of the oil supplies you can do what I did - fit 2 x 1.0mm restrictors.

  • Like 1

Hi KiwiRS4T do you have hydraulic lifters, BTW I like your idea on running 2 x 1.0mm restrictors, so do I put the 1.0mm restrictors in the middle and rear oil feeds. BTW when I looked at the restrictors on the tomei website it says do not use restrictors in conjunction with the hydraulic lifters which seems not to be correct.

Thanks

Hi KiwiRS4T do you have hydraulic lifters, BTW I like your idea on running 2 x 1.0mm restrictors, so do I put the 1.0mm restrictors in the middle and rear oil feeds. BTW when I looked at the restrictors on the tomei website it says do not use restrictors in conjunction with the hydraulic lifters which seems not to be correct.

Thanks

Front and rear leave the VCT alone. What kind of oil pump are you using? What are you using the car for - track only? Street car? Circuit track days?

Actually mines on an RB30 block with an RB25DET head with hydraulic lifters and an external supply to the VCT.

Never mind Tomei get the restrictors from me!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
    • Well the articals keep saying a Q50s (Skyline in Japan) with a new Manual gearbox. I like the talk about the new looks with the round tail lights. I hope they bring back the retro look like they did with the Z
×
×
  • Create New...