Jump to content
SAU Community

Recommended Posts

Hey folks,

I noticed on the track that the back end of my R33 gtst feels a bight 'light'. What I mean by that is that if im coming down the straight doing around 160-170kms the back feels a bit bouncy and unstable. I've added a bit of weigh in the boot which seemed to help a bit.

Any idea what could be causing this? My guess is that my suspension is simply not cutting it on the track. I currently have JIC height adjustable coilovers but will be considering upgrading when I have the money. Other suspension components (arms etc) are also stock. I lowered the car but dont want to go much lower as it seems to be at good height.

If you guys have any thoughts please let me know.

Cheers

Amir

Link to comment
https://www.sau.com.au/forums/topic/450107-back-end-feels-light/
Share on other sites

Don't put weight in the back to try to counter bad suspension setup. That's a terrible idea.

Hard to know exactly what is wrong - too many variables. Could be poor alignment (toe), poor damping, slop in bushes, tyres themselves. It could even be the front end causing problems at the back (mismatch, poor alignment etc.)

How do you know it's at a good height? Just from looking at it, or because of the amount of travel (bump and droop) you have available? How has the ride height affected geometry? Are the dampers in good condition? (ie did you buy them second hand?)

Best advice is to take it to a suspension place (preferably one who understands track cars) and check out what you have (bushes, alignment, shock tests etc.). This might give you an insight into what's going on

Cheers guys. I think it is too stiff. I got alignment done by Wheels World - Peter races in Targa etc and is quite knowlegable. He gave the thumbs up for ride height and tried to do the best allignment with the stock components. I agree that adding weight is silly in this instance but I did it to test for any differences.

I am looking for new coilovers and other suspension bits to allow for adjustments so we'll see what happens. Meanwhile its good to get some input so cheers.

Got any ideas on the spring rates involved? Which track? Is that straight smooth or does it have any low or high frequency bumps in/on it?

Springs and dampers need to be matched to tune them to a particular frequency. Race cars get stiff springs in order to limit body roll and to make one part of the suspension (the springs) suited to high frequency inputs. That's because when going fast the input of bumps and the transitions caused by changing directions are short and sharp. When running stiff springs, the dampers then have to be matched so that the system isn't horribly underdamped at the frequencies likely to be experienced. Horrible overdamping is also to be avoided, but probably not as bad as underdamping. BUT......one thing that can happen and is spectactularly funny to see is when the rebound damping on a suspension is so high relative to the spring rate that the car will jack itself downward whilst driving around. Each bump compresses the spring, but the damper doesn't allow the suspension to re-extend. A mate of mine when I was a kid had a 116 ALFA with Koni Yellows wound to max stiffness (rebound adjustment only on these things) and stock torsion bars and rear springs. It would arrive into the carpark at work at lo-rider height and over a period of 5 minutes would raise itself back up to normal sky high 116 chassis height. It made it an awful harsh billy cart to drive around in. The suspension was too soft everywhere except in rebound damping, and so when it became compressed, it became too hard everywhere, with no bump travel.

Worth considering both aspects of the above with ref your car. Maybe the springs have been changed on those coilovers, either to higher or lower rates, leading to one or the other problem.

Edited by GTSBoy

Cheers for the info mate. The straight Im talking about is quite smooth and doesnt really have bumps - but I seem to feel anything I go over as Im guessing the spring rate is too stiff. I'm not sure what the spring rate is but I can tell you it is very stiff - too stiff. I will look into what you said mate, its great info. I dont think there's much I can do till I get new suspension. Or is there?....

Are you still running HICAS? If so, gave you checked your HICAS ball joints? For track use you probably want to ditch HICAS anyway so a lock bar or an eliminator kit might help.

EDIT: Also you might just need more aero. Years ago at Sandown I felt the car getting really light in the rear at the top of hill near the end of the back straight at ~190 clicks, not a nice feeling...

Edited by V28VX37

Are you still running HICAS? If so, gave you checked your HICAS ball joints? For track use you probably want to ditch HICAS anyway so a lock bar or an eliminator kit might help.

EDIT: Also you might just need more aero. Years ago at Sandown I felt the car getting really light in the rear at the top of hill near the end of the back straight at ~190 clicks, not a nice feeling...

no HICAS mate, got the lock bar on. I was also considering aero, maybe a decent rear wing to give it some down force. But for now I think sorting out the suspension is the main priority. And you're right, its not a nice feeling at all. I find myself wanting to come off the gas as Im afraid the rear end will kick out and send me into the wall at 170+ Ks an hour.

Cheers for the input

Amir

Lock bar doesn't prevent the outer tie rod ends from allowing slop. Worth a look. But HICAS problems are more likely to make a car feel left-right unsettled than up-down unsettled. Should be relatively easy to tell the difference at 160+.

Its an up and down rather than side-to-side movement.

Two Zimbabwe cents on flogged out rear struts.

uhhh what now?

Nizmo man made a very small bet that the rear dampers are stuffed. This is certainly a possibility. I didn't go there in initially talking about your problems because I was willing to assume that if you had HSD coilovers then you'd probably know their condition. If that assumption is not valid......

Edited by GTSBoy

I see I see. Yes they could be stuffed. No, Im not 100% sure of condition. Will get in the garage over the next few days to do bits and pieces so will have a look. Anything in particular I should look for? Leaking oil etc?

Cheers

Bahahaha.

Man, you said you have old JIC coilovers. They are usually pretty stiff (running 8+ kg/mm spring rates), so they may be what GTSBoy said in post #2. Coupled that with old, worn dampers, you'd get that bouncy feeling.

Get some MCA suspension ;).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...