Jump to content
SAU Community

Recommended Posts

Hello All.

I recently got myself a R34 sedan, and have an annoying miss when it gets hot. One possibility is the coils packs failing which is common on the Skylines. I had a look at the coils and the car has two types of coils in it. Looking on the forums 3 look like they are Splitfires and the other 3 look like Nissan OEM.

post-136284-0-61249000-1415518459_thumb.jpg

My questions are : Am I correct on the different coil types.

Can having the different brands cause issues.

Do I only replace the OEM with splitfires or do i replace them all?

My final question is why would somebody just replace three not all of them, surely a skyline owner cant be that cheap.

Thanks R34_Bunbury

Edited by R34_Bunbury
Link to comment
https://www.sau.com.au/forums/topic/450519-coil-pack-question-different-coils/
Share on other sites

Hard to tell with the pic but the one on the left is definitely not standard Nissan. Having two types of decent coilpacks (as far as SAU is concerned the only ones that are any good are splitfire and OEM) would not be an issue as long as they are still working fine.

My advice is to let the car warm up and then disconnect each coilpack one by one at the clip and listen for the engine sound to NOT change. When you take a clip of and hear no change from the rough sound you know that is the coilpack/spark plug that is at fault.

Thanks for all your replies

Will try the disconnect coils one by one trick if I get some time next weekend, will also look at the plugs. I too would prefer all the same depending on what I find will I will replace them all with splitfires as they are the SAU standard.

Hi L33sh from another bunburyite..

Since it's an used car and you've just taken ownership I would just fork out some coin and replace all the spark plugs followed by a brand new set of coil packs.

If you're after straight plug & play a new set of Splitfires would be the best options, if you're into DIY and a tinkering, go with a set of LS coils.

I would avoid any other coilpacks that aren't OEM (new) or Splitfires. I've used other brands and they're all garbage once you start putting down some decent power, they all fail.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...