Jump to content
SAU Community

Recommended Posts

Hi everyone

My 350GT-8 cvt has a problem in gear shifting. This appears when I drive it for 40-50km. Once the problem start it will reduce the gears by itself and stay at 1st gear. When you keep the car switch off for couple of minutes and turn it back on it will drive for some time without any problem.

It has done 65000kms all together. Any helpful opinion would be highly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/451233-350gt-8-cvt-help/
Share on other sites

Probably a sensor fault.. you will likely need someone with a consult2 to figure out what is happening. They can be expensive to fix, and a lot of people have written off the car when they have had problems with this particular CVT.

  • Like 1

Please, PLEASE use the search function before starting a new thread - this has been covered DOZENS of times before. And as Sonicii said (and from my own experience) you have basically bought a lemon, and it is more than likely unfixable. These are VERY unreliable gearboxes, VERY expensive to troubleshoot and almost no-one in Australia has the expertise to fix them.

These are VERY unreliable gearboxes, VERY expensive to troubleshoot and almost no-one in Australia has the expertise to fix them.

don't know if I would say they are particularly 'unreliable'. the problem comes when something goes wrong.. you struggle to find someone even willing to look at it.. then struggle to pay the repair bill when you do.

don't know if I would say they are particularly 'unreliable'. the problem comes when something goes wrong.. you struggle to find someone even willing to look at it.. then struggle to pay the repair bill when you do.

Hi mate, do you no anyone who can scan it and find the problem. I have been to few guys and with their tools they couldn't. If u know someone in Melbourne please let me know.

Thankz

Sorry, I don't know anyone in Melbourne. If you have any decent Nissan dealers, they should be able to check it for you.. otherwise, it might need someone with a consult2/3 clone. I don't think the basic OBD2 tools will access the TCM.

  • Like 1

How long have you had the car and how many kms have you done? Do you know the gear oil has ever been replaced? (Just curious) im doing a full flush next week, sump will come off so will have a quick look for any sensors

How long have you had the car and how many kms have you done? Do you know the gear oil has ever been replaced? (Just curious) im doing a full flush next week, sump will come off so will have a quick look for any sensors

It is with me for nearly 3 years and I have done about 20000 kms. Just want to let you know one mechanic told me cvs shouldn't be flushed but I don't know it is for a fact.

people have different theories on fiddly gearboxes in a "if it aint broke dont fix/maintain it" sort of attitude. Personally, I think being proactive is a better way to go.

I've just imported my car with 100,000kms and the day after it gets rego'd im doing a full flush on the CVT.

  • 1 month later...

My car is fixed. It was a speed sensor fault. Guy who repaired it was an expert in these cars and if you r in Melbourne and wanting a good machanic contact him. Thanks everyone for their comments.

Nandi Autocare

Motor Engineers & Repairers - Keysborough, VIC

1 Futura Rd, Keysborough VIC 3173

03 9706 3444

  • 4 weeks later...

I have just finished conversion of my gt-8 to 6sp M/T. The only exsisting issue is to customise centre console which i have decided to buy an E-stopp parkbrake system which really is just providing hole for switch......I strongly believe that it is cost feasible to do conversion. Cvt oil is roughly just under $1000 every service interval of 20000km. A conversion kit is around $2000. If you are mechanically knowledged you shall find conversion of a medium factor. What a lot dont add to cost saving is that once M/T is installed you now have your vehicle tare weight under 1500kg ( with cvt = 1550KG). This in New South Wales equates to a yearly registration saving of around $140. I WAS A MECHANIC BACK IN 94' HOWEVER REALLY WOULD HAVE LIKED FOR A SHOP TO CONVERT FOR THE SIMPLICITY OF HAVING A HOIST. I WENT TO 40 DIFFERENT SHOPS AND ALL SAID NO EVEN THOUGH I WROTE STEP TO STEP INSTRUCTIONS. MODERN MECHANICS TODAY JUST WANT TO SERVICE, REALLY ARE YOU SURE YOU ARE MECHANIC!!!!!!!!!!!! FOR THOSE OUT THEIR CONSIDERING CONVERSION I AM HAPPY TO PROVIDE HELP WITH ANY KNOWLEDGE NEEDED DURING CONVERSION.....ADAM---0435729442....SYDNEY :yes:

My car is fixed. It was a speed sensor fault. Guy who repaired it was an expert in these cars and if you r in Melbourne and wanting a good machanic contact him. Thanks everyone for their comments.

Nandi Autocare

Motor Engineers & Repairers - Keysborough, VIC

1 Futura Rd, Keysborough VIC 3173

03 9706 3444

Glad it's sorted, thanks for sharing

Also Nissan factory service manual says cvt oil to be changed every 100,000kms. I don't know why you would think 20,000kms is acceptable for an oem box

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...