Jump to content
SAU Community

Recommended Posts

Hi guys,

My poor 33 s1.5 looks like it will be written off from the hail last week, I might need a replacement Skyline really soon.

I am looking for something around the $7.5k mark. Interested in R33 s1.5s or R32s, would prefer something with an RB25, if I end up with an RB20, I will wanted to have a few mods to compensate.

Something where a safety cert can be organised without too many hassles would be good.

Link to comment
https://www.sau.com.au/forums/topic/451386-wtb-r33-gtst-s15-or-r32-gtst/
Share on other sites

Hi guys,

My poor 33 s1.5 looks like it will be written off from the hail last week, I might need a replacement Skyline really soon.

I am looking for something around the $7.5k mark. Interested in R33 s1.5s or R32s, would prefer something with an RB25, if I end up with an RB20, I will wanted to have a few mods to compensate.

Something where a safety cert can be organised without too many hassles would be good.

have a look around melbourne, drift sales and the like.... you find a 33 for half that easily.

32 not so much.

series 1 but you get the idea....

if you wanna project some minters out there....

http://www.gumtree.com.au/s-ad/braeside/cars-vans-utes/1995-nissan-skyline-r33-gts-4-coupe/1062687760

gt4.... gtr box, couple of grand 4wd awesome ness....

http://www.gumtree.com.au/s-ad/silvan/cars-vans-utes/r33-gtst-skyline-/1063136188

pretty much done 2k under your budget, fly down drive it home have change lol

they have had a minor resurgence in price recently according to gumtree....

Everyone has a 33 or a 32. What you really want is this: http://www.sau.com.au/forums/topic/443726-for-sale-1988-f31-leopard-ultima/

I'm actually tempted, i have only seen a couple of them

'Tis pretty rare. Hit me up if you're keen to check it out. It's not as fast as a 32 or 33 but I'm negotiable on price so you'll have some money left over for mods. And it's way cooler ;)

about mods, would it be all z33 shit that i would go for? I would prob eventually put a manual box in but have no idea which box to go for

Most parts are either Z31, Z32 or R31. When I did the 100k service almost everything was Z32.

For manual conversion you'll want a Z31 or Z32 gearbox, flywheel, clutch, etc. Pedals from an R31. Tailshaft Z31 might work, or custom.



  • Similar Content

  • Latest Posts

    • I thought it could be an issue because the standard plate was flexing when stressed. Maybe the original gear set will hold a bit better without flex? Last time on the dyno it made around 670nm at the hubs. Now it have bigger turbo and better intake but have not been on a dyno yet. The car is being used from family trips to drag race events. So the shifts can be a little violent. It is grinding if I shift to fast so was thinking I should overhaul it soon.
    • From the factory on RB26s there's a fitting on the intake manifold collector/"plenum" that provides pre-throttle boost signal. That's how they did it back in the day, I figure it's fine to replicate it.
    • I would be surprised if that wasn't the issue. It's probably telling you, that even if you remove the plastic liner, you may have some other clearance issues that may occur too in some scenarios. IE, tyre to guard. It looks like someone has already rolled the lip, but you may still have issues in the future IE, turning and hitting a bump etc. The fact it changes how bad it makes the noise when you are going backward vs forward is highly indicative that it's the tyre rubbing. They do make a terrible sound, even if you're only pushing a project car that has a liner hanging down on a tyre!   Has the car been lowered? If it has been, what is the measurement from the centre of the wheel hub to the lip of the guard straight up?
    • Summernats cruiser?
    • Mark's a bit smarter than people give him credit... He'd convince the person that is to become dead, to drive him to the forest first. That way his car has no evidence in it, and he's free to dispose of their vehicle permanently how he sees fit too...
×
×
  • Create New...