Jump to content
SAU Community

Recommended Posts

Today i saw a r34 drift car. Would it of been a gtr converted to rwd via drive shaft, or a model skyline with rwd already. Or still awd, doubt it but possible.

Also could a strip and n/a r33 and engine swap it to build a drift car or would i need to buy something lighter.
(I know nothing about drifting but really want to learn)
cheers.

Link to comment
https://www.sau.com.au/forums/topic/451486-skylines-as-drift-cars/
Share on other sites

Any Skyline will be a great car to learn to drift in.
R33's are good, relatively cheap to buy and strong engine/gearbox/brakes etc. Drum handbrake is a bonus too.

Realistically though, any Skyline will be fine for drifting mate, doesn't have to be anything special.

  • Like 1

get rid of the r33.. get yourself a S CHASSIS (s13,s14,s15,180sx) and go from there. So much better to drift and much more nimble and comfortable. (i have drifted both my r33 and my brothers 180sx and id choose an s chassis any day)

Ideally that's what i'd want but i'm thinking of turning my n/a r33 into a drift missle after i get my full license and go turbo :P
At least for my first drift car as I will probably destroy it trying to learn

I am currently converting a R33 gtst into a drift car.

I went to driftx a couple of weekends ago at calder and there must have been 15 R32/33s so they are a popular car.

I like the s chassis and was looking at these but too many people think an s13/14 is worth too much money. I ended up with a R33, may not be the best but it's a learning machine.

From my experience with most motorsports, just get something and get out there. The s chassis may be more nimble but starting out you won't take advantage of it. Best to have a cruel master that teaches you to be careful on transitions to improve your skills.

I think you could use the na to learn but would change cars rather than slap on a turbo to yours. Maybe do beginners on the na and buy a different car when getting more serious.

My 2c

  • Like 2

r33s are popular due to their strong drivelines and good brake setup.

You can learn to drift in a XF Falcon if you're mustard. But learning in something that works good will make your drifting skills better. If you have a car that's uncomfortable to drift or something that doesn't handle as well as an s chassis you'll never build the confidence to really push it, instead you'll stay at the same spot skill wise.

Not saying go s chassis to be lazy and it does all the work for you, but they're a better handling vehicle which in turn will give you the confidence to drive harder and get more angle etc.

Also alot of the time its power, never start off with a high power car because you'll never grow the balls to actually use the power to its limit.

just my 2c

  • Like 1

Any R/S chassis with a properly locking diff (2 way, shimmed standard or welded [im not going to judge you]) is a very capable drift car. Make sure it doesn't have any boost leaks, that it has an adequate cooling system, a check of the AFR's and a good fuel pump would be my prerequisites if I was about to get into it.

If you have a bit of cash to throw around then next mods would be front mount intercooler, exhaust, electronic boost controller and oil pressure/temp and water temp gauges (don't trust the standard ones) but any car you buy now will have some/most of these already.

You will be amazed how far you can push a standard car before the car become the limiting factor and not your skill as a driver/size of your testicles.

Your user name is awesome. Yeah i was just asking about n/a because i currently have a n/a r33. but a n/a 180 makes less power then my car so my only option would be turbo.
Can someone help me make a list of affordable drift cars. between 5k-10k (buying price excluding mods)


cheers

Edited by SkylineR33RB25

Where are you located? Just trying to figure out what tracks you would be drifting. My mate started drifting in a bog stock NA R33 with a 2 way, and he f**king kills it for it being a non turbo car. He actually won the amateur series and was the only NA car in the field, so skidding an NA r33 is definitely possible but he can really steer very well.

Personally I would either buy a turbo S13/180 (SR not CA) or a R32/33. Can pick up a fairly standard one of any of these cars for 5k. 33's seem to be especially cheap at the moment.

You do have the (harder) option of turbo'ing your current car, but you would have to replace the gearbox with a 25 turbo box which is a $1-1.5k adventure on its own.

  • Like 1

Did a bit of research i think my best options are;
an s chassis (s13-14 180sx 200sx), skyline (r32 r33 turbo rwd version maybe even an old r31?) or toyota supra
Just a lot of browsing car sale websites till i find a banged up one without rego.

Edited by SkylineR33RB25

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...