Jump to content
SAU Community

Recommended Posts

  • 4 weeks later...

Hey guys so update time. nothing too crazy has happend really since last time. nothing like some of the builds on here with crazy engine builds ect.

But anywho heres what i have done/had done.

So ive been wanting to upgrade the alarm system for a while now. and thaught id Opt for the Steel Mate remote start system. so i purchased one and it got shipped to my door 2 days later from sydney. great service.

Heres a quick video showing the remote start.

and i had to take a quick snap leaving ti at my Auto Elecs house :)

20150608_144053_zpsbckxnm45.jpg

https://www.youtube.com/watch?v=8xJHxu97J2w

Next on the list was i wanted to Up my Boost a little bit so ive purchased a twins tage turbosmart boost controller for only $20 of my mate.

But i didnt want to do this without a boost gauge so i knew exactly what Boost i had. (Not going over 14psi)

So this also arrive in the mail 2 weeks later. its a Race Tech brand boost guage.

20150612_173119_zpspry3ifzd.jpg

well see how it turns out when installed.

Pics below

20150612_173258_zpsqevaly0q.jpg

20150612_173303_zpsywj0oufi.jpg

And ive never heard the car outside before so i got my girlfriend to record me while i do a terrible/ Little Launch haha.

https://www.youtube.com/watch?v=EqkokC1zTeY

  • 2 months later...

So nothing too crazy has happend lately with my GTR. except chasing down parts to restore it back to its former glory..

First of all was starting to get a bad miss under heavy load/boost operation. already had cleaned afms. put enw spark plugs in and thaught i would take the plunge to go new coilpacks. as i Went OEM with my GTST i thaught fu#k it im goign with splitfires this time.

So order set out. also orderd a ECU water temp sensor.
20150807_080757_zpsdc8l5sln.jpg

1 week later from kudos here they came.
20150807_082301_zpsc3nvy1rn.jpg

20150807_172945_zps2yjpa5na.jpg

The water temp sensor has seemed to help out alot with my cold start issues but still im in need of slightly tapping the throttle to get her going. so the IAC valve si on the list of things to clean/inspect maybe replace next if i have to.

Bad photo but you get the point splitfires are in :D

20150807_172521_zpsijxh5pal.jpg

And then on the list was time to finally get rid of those crappy rims. that are 9.5 on teh rear with 8.5 on the fronts that had shitty 235 tyres on them.

I have always Loved and dreamed since owning my GTR of buying some Work Meister S1 3P rims. but the price is just not in my region atm when i have more important thigns to fix. so a good quality copy is in order.

20150905_161809_zpsuqonxmpk.jpg

20150905_115640_zpsl1hzsh4k.jpg

20150905_111003_zpsrsxfb6ku.jpg

Opinions. i know ive asked this color or color match silver the front lip. btu now. cause i have glossy wheels i feel the lip should be glossed up too. to make it more even. thaughts?

20150905_111018_zpsnbvxxjyv.jpg

My new 18x10 +15s allowed em to now run some much better and grippy tyres.
some achillies 265/35 18s

20150905_101400_zpstu1fmuds.jpg

and 1 last shot haha. the car really needs a good polish up. and clean up. want to polish up the kakimoto cannon.

but all in due time :D

next on the list is restoring back to the factory brembos with some nice upgraded discs and pads :D

20150905_115650_zpshltenexz.jpg

Brembos will be painted r34 gold. if i dont purchase r34 brembos.

Thanks every. thaughts and opinions are always welcome :D

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...