Jump to content
SAU Community

Recommended Posts

Enkei RPF1 18x10.5 +12 (Black) with brand new Hankook RS3 285/35/18s. All done max of 500km. You can still see the Hankook where the tyre meets the road. $2000.00 Wheels don't even have brake dust on them.

Trust T517z 8cm Turbos. Chris at racepace has inspected thinks they are in good condition. No play. Come with the front pipes to match $1000.00

Dump pipes. Trust I think. $100.00

ATS & Across Twin Plate Ceramic Clutch. Luke at Racepace has had apart if you want an opinion on it. In great condition. Pics attached. Done less than 1500km. $1000.00

Recirculation catch can $50.00

80 mm afms from RB25 series one motors. Seem perfect $100.00

Carbon Fibre front lip. In perfect condition. $200.00 You can see it on the car here http://www.sau.com.au/forums/topic/449000-rare-opportunity-r33-gtr-new-fresh-forged-rb26/

ACL Race series Forged pistons. These seem fine but as I don't know for sure what happened to motor they can go for $100.00

Custom 3.5'' exhaust with Varex 4inch muffler. I believe it is the vmk 18-400. With controller. $400.00 the lot. Muffler pretty much brand new. Pick up only.

Pod filters. They have drift written on them. Near new. Also has a guard. $100.00

Carbon Fibre cam cover. Brand new $50.00

R33 GTR crankshaft. Been modified for N1 pump etc. I havn't had tested but supposedly just redone by mechanic who had the car. $200.00 because I personally havn't had it tested to say what condition it is in.

All the photos are attached because I couldn't seem to post photos on the thread.

Everything is ONO and preference will be given to pick up buyers who can do cash. I will post at buyers expense.

If you want more photos just ask. There will be more parts to come as car is pulled apart further including 50mm radiator, Tein shocks with EDFC etc. I have priced everything I think to move fast however if anything is truly over prices please let me know.

I am in Croydon Victoria.

P.M. me for number.

Mick.

post-882-0-39502600-1419219822_thumb.jpg

post-882-0-44389400-1419219840_thumb.jpg

post-882-0-67251800-1419219852_thumb.jpg

post-882-0-05692600-1419219865_thumb.jpg

post-882-0-83257800-1419219875_thumb.jpg

post-882-0-48662000-1419219888_thumb.jpg

post-882-0-02020200-1419219937_thumb.jpg

post-882-0-07836100-1419219948_thumb.jpg

post-882-0-60808500-1419219956_thumb.jpg

post-882-0-71470100-1419219964_thumb.jpg

post-882-0-97142900-1419219972_thumb.jpg

post-882-0-43515000-1419219980_thumb.jpg

post-882-0-30108000-1419220192_thumb.jpg

post-882-0-31371200-1419220199_thumb.jpg

post-882-0-03937200-1419220549_thumb.jpg

post-882-0-44317100-1419220556_thumb.jpg

post-882-0-84983400-1419220563_thumb.jpg

post-882-0-86555500-1419220731_thumb.jpg

post-882-0-14944400-1419220745_thumb.jpg

post-882-0-80891000-1419220753_thumb.jpg

post-882-0-58976800-1419220765_thumb.jpg

post-882-0-54468200-1419220837_thumb.jpg

post-882-0-04330500-1419220845_thumb.jpg

post-882-0-58509300-1419220857_thumb.jpg

post-882-0-12301900-1419221140_thumb.jpg

post-882-0-30064600-1419221155_thumb.jpg

post-882-0-05674800-1419221162_thumb.jpg

post-882-0-38287000-1419221197_thumb.jpg

post-882-0-00517300-1419221209_thumb.jpg

post-882-0-26140200-1419221222_thumb.jpg

post-882-0-35998500-1419221293_thumb.jpg

post-882-0-19759300-1419221303_thumb.jpg

post-882-0-02316700-1419221311_thumb.jpg

post-882-0-49412900-1419221466_thumb.jpg

post-882-0-38032700-1419221511_thumb.jpg

post-882-0-63656100-1419221524_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/451971-gtr-parts-wheels-turbos-etc/
Share on other sites

Hey mate,

Any idea of mileage the turbos has done?

What power/boost have they ran before removing if you've any idea.

Hey mate,

Any idea of mileage the turbos has done?

What power/boost have they ran before removing if you've any idea.

No idea mate. Mopst of the car has done very few miles since being modified but I don't actually know.

Is that the right price for the trust dumps/front pipe?

Yes. Someone has said they want them already so I assume they are too cheap. Oh well his gain.

Hey mate,

any other info. of ACL Race series Forged pistons

and the way to deliver or post them to my place

thankx alot

What do you want to know about them? I don't know much about them other than they were going to be put back in the car when rebuilt but I'm going another way so using other pistons, rods etc so can sell these.

Where are you? Saudi Arabia?

Edited by Mick Trainer

hi there

i wanna take the item as its shown in your pic but pistons brand name? and champer ring missing from one of them?, connection rod brand name? any damege of their bearing means unuseful connection rod

yes i m from saudia arabia

so sorry about all of that Qs but looking for connection rod in good condition and heavy duity

last not lest how match money they will cost for you and delivery post in US Dollar

serious buyer

thankx

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kittens in first to claim dominance of the residence, then puppies later From past experience, the other way around can be problematic to say the least  Those weird "Dobby looking"  little kittens are not cheap....LOL
    • At least yours have parkour down pat. One of mine will still trip over his own shadow and fall over... He's a special type of cat... Ha ha ha
    • The question then becomes - was there any fluid coming from that hole before you did the rebuild ?    You may not have noticed, of course.   Depending on how you did the rebuild, the possibility has to be considered that somehow (cleaning ?)  fluid entered that hole and is now being 'forced'  out by small movements of the proportioning valve.   From the factory, there's actually a small rubber plug in that hole but with age and under-bonnet heat it's quite common for it to 'go missing'.  That rubber plug is designed to allow the venting process but also to prevent 'stuff' getting to the area (prevent corrosion, etc).   The plug is also not available as a spare part AFAIA. Personally I wouldn't race and buy a new master just yet but keep an eye on the area to see if the 'leak' continues.   If you're concerned about brake fluid damaging nearby paintwork, cable tie a piece of suitable absorbant material over the hole and remove/monitor occasionally.    Operation of the proportioning valve and the brake master itself won't be affected, but also keep an eye on brake fluid level, of course. In terms of a new master, the genuine part is getting expensive, unfortunately.  Amayama is showing AUD900+.   I was searching recently and there's an aftermarket part available from Japan made by 'Parts Assist': https://zenmarket.jp/en/yahoo.aspx?q=BNR32%2bBM50&p=1 Whether it's any good I have no idea, although in my experience Japanese aftermarket stuff is pretty good quality-wise.   The above site allows overseas buyers to purchase stuff more easily from Japan but there are fees and shipping costs, of course.   The original Japanese seller page is here: https://auctions.yahoo.co.jp/jp/auction/p1197401228 Copper/Nickel is fine but I still prefer bundy tube and it's also cheaper.
    • Your chihuahuas look weird!
×
×
  • Create New...