Jump to content
SAU Community

Recommended Posts

Hey guys,

I have no headlights, taillights, indicators, interior lights or dash lights. (battery light will come on when I switch the headlight switch - but will remain on until the battery is disconnected)

I do not have the two green ECU relays in currently..but have tested with friends and the same issue persists.

I have checked all under dash fuses...all good. Not sure about engine bay fuses though.

I have taken some photos of some plugs that I cannot find homes for..could you guys take a look at them and tell me what they are for?

THANKYOU FOR UNDERSTANDING I AM YOUNG AND THIS IS ALL PRETTY NEW TO ME HENCE I AM A CAR NOOB.

ZdnW5X9.jpg

This splices out from the starter motor / alternator loom. Can't find anywhere to plug it into the alt?

vSFCT8K.jpg

These two plugs are coming out of the fuse box...no where for them to be plugged in?

XGYrTHv.jpg

These two plugs seem to be related to the headlights..but once again nothing to plug into?

R5WENwR.jpg

These two plugs again seem to be near the headlights..any clue?

hwwN8wa.jpg

I believe one plug is for the power steering reservoir which has been cut on mine, but the other two don't seem to have a place?

y1RJl3T.jpg

Again, not sure what this plug does / where it goes.

kng6ak4.jpg

This last plug looks important..but again no luck in finding where it goes. Help would be greatly greatly appreciated please :D

Link to comment
https://www.sau.com.au/forums/topic/452266-r32-engine-and-dash-wiring/
Share on other sites

Fuark Maaate - good luck. Shoulda kept walking and kept your money.

Grab someone who has a 32 GTS-t and experience to help spend time sorting it. Park side by side

Who ever did that mess should of labelled when pulling plugs n cables etc...

Rusty as.

Good experience tho

Ps. Some plugs don't have a mate

Edited by Sinista32

The car was a rolling shell. I haven't touched any of the body loom..but I have put the engine loom and engine in myself.

Oh and as for the rust, that's the only place in the whole shell that has rust, so I'm not worried. Already got a plate to tack in there.

Green cable looks like the one connected to the ignition barrel. The one off it could be for the Ring that lights up the barrel ?

The one near the fuse box is that for consult ?

Edited by Sinista32

In Picture 1 and 2 you seem to be missing a resistor which attaches to the body.

Two of those plugs connect to it and a third which splices off it is not used.

Sort of like the Low impedance resistor for the injectors on the RB26

Edited by Sinista32

Cheers thanks man. I took two more pics.

First pic is another plug that I have no bloody clue what it is. I somehow missed it before. Any idea?

Second pic is where that resistor is supposed to go. Doesn't look like anything has ever been there on this car, although it could be mounted further back.

PS. Thanks for helping man, I really appreciate it.

post-135261-0-77835400-1420201048_thumb.jpg

post-135261-0-88173500-1420201050_thumb.jpg

Edited by Tenny

I made a quick video that might explain the problem a little bit better.

So basically, no ignition lights or power to anything else in the car. Windows, all lights, indicators.

Car will turn over when key is turned, but fuel pump is not priming and possibly no spark. Is it possible this is being caused by something that isn't earthed? I have tried looking for all earths and grounding them to the chassis / engine.

https://www.youtube.com/watch?v=vV3BmF8Auuo&feature=youtu.be

Cheers guys.

The silver resister box is the resistor for the air reg. Air reg will close from engine bay heat anyway.

The plugs under the steering column, where you're holding one wire, I'm guessing you've got a turbo timer loom there.

If so I'd chuck the turbo timer and associated plug-in-loom, then things will look much better.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...