Jump to content
SAU Community

Recommended Posts

hi guys , my ac has no gas,in it and wont blow cold. just wandering if my (93 R32 GTR) can it it take the new oil without changing current compressor / set up ? cause the mechanic mention something about the old gas is not available anymore. i am in Melbourne any recommendation to the my ac system checked out and fix .

thanks

Link to comment
https://www.sau.com.au/forums/topic/452342-ac-problems/
Share on other sites

Who said anything about regassing with out a license?

Just curious as to why someone would gas up without doing the proper checks for leaks w/ nitrogen. Comes across as someone hasn't done the training and acquired the license.

I know of a lot of mechanics who just regas without checking the system for leaks, annoys me to no end. If this isn't the case, disregard me.

Link to comment
https://www.sau.com.au/forums/topic/452342-ac-problems/#findComment-7455208
Share on other sites

Yes the new gas can be used in the old system, though its typically less effective. The axillary fan on always with AC on is a good mod.

http://www.sau.com.au/forums/topic/153378-r32-have-your-overheat-fan-turn-on-with-your-ac/

Concur with sleptema - seals first and see if it leaks.

Link to comment
https://www.sau.com.au/forums/topic/452342-ac-problems/#findComment-7455273
Share on other sites

dryer needs to be changed if going from r12 to r134a, oil to depending on what oil is in it, then two valve adaptors installed,
also technically your not allowed to put r12 in cars any more anyway, and cars need to be leak tested before regassing (vacc and hold pressure for atleast half an hour, nitrogen is just useful for finding leaks that are a bitch to find) or your going against the terms of your arctick licence.

alternativly hychil can be done without a licence yet thats opening another can of worms, and thats only if there is no gas in the system at all or it needs to be recovered by a licenced person

what jiffo is saying is take a photo of the little valves on the aluminimum lines in the engine bay to show what type they are

http://www.aa1car.com/library/ac_service_fittings.gif

that shows the difference

Edited by Scott Black
Link to comment
https://www.sau.com.au/forums/topic/452342-ac-problems/#findComment-7457471
Share on other sites

i went to a dodgey guy, i say dodgey just becuase he gassed it up and said if it leaks out just come back and well look for leaks then. even i just thought why not just fix them now.

funny thing was it never leaked out. well 1 year later still worked so maby super slow leak

Link to comment
https://www.sau.com.au/forums/topic/452342-ac-problems/#findComment-7457504
Share on other sites

average system takes around the 650g of gas mark, some leaks are as small as a few grams a year, say you have a small 15 gram a year leak, its still going to work pretty well for 3 years or so, and after that will just fail to be as cold as it should then stop all together.
in the code of practise for auto ac (2008) it says that you should service (pretty much leak check, regas and change the dryer out) every 5 year

http://www.arctick.org/pdf/Automotive_RAC_CoP.pdf

page 13 (dryer needs to be replaced every regas, and needs to be regasses every 5 years)
page 16 (needs to be leak checked whenever regasses)
page 18 (need to tell you to run the system for atleast 5 min weekly to keep it healthy)

just random information that most people dont know, and arnt told

Link to comment
https://www.sau.com.au/forums/topic/452342-ac-problems/#findComment-7457514
Share on other sites

  • 1 month later...

Rather than starting a new thread, I'll just ask the question here.

How can I check for air con leaks? I'm pretty sure that the system had dye put in it when it was regassed a few years back (had work done that required the gas to be vaccines and regassed) and I'm pretty sure that the system has since developed a leak.

I know that a uv torch is used, and some yellow glasses, but I'm just wondering if it's a special torch, or any old uv torch/blacklight that I can buy off eBay for a few dollars?

Oh and the car is currently unregistered and I'm just in the process of getting it back on the road (so I can't just drive it to an aircon place and get it checked)

Link to comment
https://www.sau.com.au/forums/topic/452342-ac-problems/#findComment-7490914
Share on other sites

  • 1 month later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...